Evil Energy Best Selling

• One-piece full flow design with reinforced curvature for smoother, unrestricted fuel delivery.
  
• Available in AN4 / AN6 / AN8 / AN10 / AN12 sizes, precision-threaded for secure fitment.
  
• Made from 6061-T6 aluminum alloy with black anodized finish for lightweight strength and corrosion resistance.
  
• Supports up to 1500 PSI and -40℉~250℉, ideal for both street performance and racing applications.
  
• Push lock barb design ensures fast installation on rubber fuel lines—add clamps for extra sealing.
  

This comprehensive transmission oil cooler kit includes all essential components for efficient cooling and straightforward installation. It features a high-performance oil cooler, a versatile Insta-Dapt adapter, a durable 5/16" hose (5ft), four secure mounting rods, protective foam pads, reliable hose clamps, and practical mounting clips. The kit ensures easy installation, enhanced durability, and optimal transmission performance, helping to extend engine life by maintaining ideal oil temperatures.

• Connects 3AN or 6AN male flare to 1/4", 5/16", or 3/8" OD hardline using compression adapter.
• Crafted from black anodized aluminum with brass ferrule for leak-free high-pressure sealing.
• Standard 37° AN flare ensures metal-to-metal seal without the need for thread sealant.
• Ideal for fuel delivery, EFI conversions, LS swaps, and custom engine bay plumbing.
• Only compatible with stainless steel or aluminum hardline – not for rubber/Nylon hose setups.

• Material: The fitting is made of 6061-T6 aluminum alloy and includes aluminum washers.
• Parameter: The maximum working pressure is 1,500 PSI, and the working temperature range is -40°F to 250°F.
• Application: The fitting converts a carb fuel inlet to AN threads and fits most carburetors with 5/8-20 inlets.
• Sealing: The AN side of the flare is sealed with a 37-degree angle.

Package Includes：

1. Fuel Cell Gas Tank‎*1（5 / 10 / 15 Gallon Optional)
2. Fuel Pressure Regulator*1
3. 300LPH Inline Fuel Pump Electric*1
4. ‎6AN to M18*1.5 Fitting Adapter*1
5. M12*1.5 to 6AN Fitting Adapter*1
6. 50mm Fuel Filter Mounting Bracket*2
7. 60mm Fuel Filter Mounting Bracket*1
8. 20FT 6AN CPE/PTFE/Antistatic PTFE Fuel Line*1
9. AN10 to AN6 Male Flare Reducer Adapter*2
10. 100 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter*1
11. 10 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter*1
12. 90 Degree Fittings *4
13. 0 Degree Fittings *8

• Before purchasing, please determine the size of fuel line and fitting you need: 4AN, 6AN, 8AN, 10AN.
• Measure the length of the required fuel hose before purchase: 10FT, 20FT, 25FT.
• Save at least 20% OFF on the fuel hose and end kits than buying them individually.

📦 Kit Contains:

- 1 PTFE fuel hose in your chosen length (10FT/20FT/25FT)

- 4 Straight hose fittings (6AN/8AN/10AN optional)

- 2 45-degree hose fittings (6AN/8AN/10AN optional)

- 2 90-degree hose fittings (6AN/8AN/10AN optional)
📝 If you have other kits/bundles you want to buy, please contact our customer service email to give suggestions: support@ievilenergy.com.

• Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.
• Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation.
• Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.

Application:1999-2014 Chevrolet V8 4.8L/5.3L/6.0L (LS-based engines)

Upgrade your fuel system with the EVIL ENERGY Push Lock Hose End Fitting Kit. This 8-piece set includes multiple angles (Straight, 45°, 90°) for flexible installation and smoother routing of fuel lines. Built from 6061-T6 aluminum alloy with a durable black anodized finish, these fittings withstand up to 1500 PSI and extreme temperatures, delivering a leak-free, professional-grade solution for performance builds.

Compatibility: Fits 2011-2023 Chrysler 300/300C 3.6L, 2011-2023 Dodge Challenger/Charger 3.6L.

Installation: 40-minute setup with basic tools; no cutting/drilling required.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing power.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 102mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: Chevrolet LS2/LS3/LS7/LSX, CTS-V (with TPS)
   Note: For the most accurate fitment, please refer to the measurements shown in the product images.
   
   

Fuel System Kit Specification

Shared Components (Both Versions Include):
✔ LS Fuel Filter Regulator with 6AN adapter fittings
✔ 100 Micron Fuel Filter with 6AN, 8AN, 10AN adapters & mounting bracket
✔ Fuel Pump with pre-installed fittings
✔ Installation Adapters:

• 2× 6AN to 3/8" NPT adapters
• 1× AN6 to 5/16" Quick-Disconnect

Version-Specific Components:
▸ PTFE Version:

• 25FT 6AN PTFE Stainless Braided Hose
• 8× Straight AN6 PTFE Swivel Fittings
• 2× 45° AN6 PTFE Swivel Fittings
• (Superior chemical/heat resistance, low permeation)

▸ CPE Version:

• 25FT 6AN CPE Fuel Hose
• 8× Straight AN6 Standard Swivel Fittings
• 2× 45° AN6 Standard Swivel Fittings
• (Cost-effective, flexible, durable)

Core Versatility

• Multi-purpose application: Ideal for fuel supply/return, transmission oil cooler, coolant, vacuum, turbo cooler, or oil feed lines.
• Broad fluid compatibility: Works with transmission fluid, oil, race gas, diesel, hydraulic fluid, and vacuum (excludes E85/E10 ethanol fuel).

Premium Durability

• Construction: CPE rubber inner + 304 stainless steel wire helix + nylon outer braid; aluminum alloy fittings.
• Abrasion/corrosion-resistant: Withstands harsh engine bay conditions (heat, chemicals, vibration) for long-lasting reliability.
• Flexible routing: Minimum bending radius ranges from 2.0"(50.8mm) to 4.5"(114.3mm) based on AN size.

High-Performance Specs

• Working pressure: 750PSI (AN4/6/8), 625PSI (AN10), 500PSI (AN12).
• Bursting pressure: 2250PSI (AN4/6/8), 1875PSI (AN10), 1500PSI (AN12) – stable under extreme load.
• Temperature range: -22°F to 248°F (-30°C to 120°C) – adapts to all climates and driving scenarios.

Package Include

• 1 × 33FT CPE Fuel Line (Black Cotton Braided)
• 8 × 0° Swivel Fittings (Black Aluminum Alloy)
• 4 × 45° Swivel Fittings (Black Aluminum Alloy)
• 4 × 90° Swivel Fittings (Black Aluminum Alloy)
• 4 × 180° Swivel Fittings (Black Aluminum Alloy)
• 4 × AN4 Fuel Line Clamps (Black)

Application & Value

• Suitable for: Street vehicles, high-performance builds, racing, off-roading, and automotive repairs/maintenance.
• Easy installation: Complete fitting kit and flexible design simplify routing and connection.
• Note: Do Not fit E85, E10 Ethanol Fuel – ensure compatibility with your fluid type before use.

Direct Replacement:Perfect for 2-bbl street performance upgrades. Officially mandated carburetor for select oval track racing series.
Manual Choke:Cable-driven, hand-operated for precise cold-start control.
30cc Accelerator Pump:Delivers extra fuel for crisp initial acceleration.
A/T Kickdown Compatibility:Works with GM, Chrysler, and Ford automatic transmission kickdown linkage (additional parts may be required).
Power Valve Blow-Out Protection:Built-in safeguard against failure.
100% Wet-Flow Tested:Every unit verified by Evil Energy technicians for immediate installation and performance.
Recommend electric choke type carburetor :350 CFM 2-barrel Carburetor