Evil Energy Best Selling

• Converts AN6 or AN8 female thread to 5/16" or 3/8" SAE quick disconnect EFI fitting.
• Machined from 6061-T6 aluminum, black anodized for durability and corrosion resistance.
• 37° AN flare design ensures tight seal, no leaks up to 1500 PSI.
• Operating range: -40℉ to 250℉ – suitable for high-temp, high-pressure EFI systems.
• deal for LS swap fuel rails, return lines, sensor ports, and transmission coolers.

The EVIL ENERGY NPT Plugs are built from aerospace-grade 6061-T6 aluminum with a black anodized finish for superior strength and corrosion resistance. Designed with a tapered 60° thread, these plugs provide a secure, leak-free seal in fuel, oil, or fluid systems — perfect for high-performance automotive applications.

• SAE 30R10 certified submersible fuel hose, ideal for in-tank fuel pump and EFI applications
• Withstands 300 PSI working pressure, 1200 PSI burst rating, and -40°F to 212°F wide temperature range
• Compatible with gasoline, diesel, biodiesel (B100/B20), E10–E85 ethanol blends, oil, and mineral spirits
• Constructed with nitrile inner tube, stainless steel braid reinforcement, and nitrile/PVC outer layer
• Replaces 30R7/30R9 hose for critical submerged fuel system use

1. Broad fit: 92mm throttle body with IAC, compatible with GM Gen III LSX/LS1/LS2/LS3/LS6/LS7
2. Optimized valve: Reduces low-RPM torque losses for consistent power
3. Tangible flow boost: Taking 92mm to 102mm upgrade as example – ~15%-20% intake air increase (naturally aspirated, e.g., 18% in Toyota 3.5L V6); up to ~23% (turbocharged, >1.5Bar boost)
4. 200ms fast response: Quick acceleration/deceleration, sharper throttle & more flexible engine
5. Major horsepower gains: Meets strict OE standards for top-tier performance
6. Reliable design: Meticulous detailing ensures long-term performance & durability

• Complete PTFE Plumbing Kit – Includes 6AN/8AN/10AN swivel hose ends, AN male-to-male coupler, and hose separator clamps for a full fuel/oil system upgrade.
• Leak-Proof 37° Flare Seal – Delivers a secure, high-pressure connection superior to rubber hose clamps or push-lock fittings.
• High-Performance Build – CNC-machined 6061-T6 aluminum, black anodized coating, and up to 1500 PSI capability for racing-grade reliability.
• Perfect for Tight Engine Bays – Straight/45°/90°/180° configurations simplify routing in complex layouts and boosted setups.
• E85-Ready & Temperature-Resistant – Works from -65°F to 252°F, ideal for fuel, oil, and transmission line upgrades.
  

High-Performance Triple-Layer Fuel Hose

• 3-Layer Construction: PTFE liner (chemical-resistant) + stainless steel braid (high strength) + nylon cover (abrasion-proof)
• Multiple Sizes: 4AN/6AN/8AN/10AN/12AN – fits most fuel systems
• Angled Fittings: 0°/45°/90°/180° – flexible routing in tight spaces
• Fitment：including ethanol, gasoline, anddiesel, providing superior resistance to fuel degradation and corrosion.

• sizes：

6AN ID: 0.31". OD: 0.43inch. Length: 10 feet.

8AN ID: 0.39". OD: 0.52inch. Length: 10 feet.

10AN ID: 0.52". OD: 0.69inch. Length: 10 feet. 

• Applications：PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc.
• Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 1500 psi. Bursting Pressure: 4500 psi.
• Applicable Medium: all automotive fuels, lubricants, and coolants.
• Installation：PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

Electric Exhaust Valve: Boost Performance & Sound

• Universal Fit: 2/2.5/3 inch exhaust pipes, check space before buying.
• Powerful Sound: Deep, aggressive exhaust note, enhances performance.
• Durable Build: Stainless steel pipes, aluminum alloy valve.
• Easy Install: 3.5m wire, 12V, 100m remote range.
• Reliable Use: Works 0℃-150℃, avoid extreme weather.

Upgrade your vehicle with our electric exhaust valve for a powerful sound and enhanced performance

• Complete Kit – Includes 25FT 3/8" SAE 30R7 NBR push lock hose, 14 aluminum fittings, and 10 clamps.
• Durable & Reliable – 3-layer NBR rubber construction resists fuel, oil, and high temps (-40°F to 248°F).
• High Pressure Rated – 550 PSI working, 1305 PSI burst for performance builds.
• Versatile Compatibility – Works with gasoline, diesel, biodiesel, methanol, ethanol, and more.
• Wide Applications – Ideal for fuel systems, oil cooling, and custom automotive projects.

Durable and compact, the EVIL ENERGY AN check valve is engineered to prevent backflow in fuel, oil, coolant, and air systems. Built with a stainless steel spring-loaded piston, it allows one-direction flow and protects your system from pressure surges or reverse contamination. Ideal for performance builds, custom plumbing, or returnless fuel setups.

• Metric to Barb Adapter
  Converts metric ports to standard rubber fuel hose.
• Leak-Resistant Seal
  Aluminum washer helps ensure a tight, secure connection.
• CNC Machined Aluminum
  Lightweight, durable, corrosion-resistant 6061-T6 alloy.
• Straight Low-Profile Design
  Ideal for clean routing in compact engine bays.
• Fuel System Ready
  Designed for fuel pumps, regulators, and oil systems.

📦Package Includes:

• 1*12FT/16FT PTFE Fuel Line
• 2*AN8 Straight PTFE Fitting
• 2*AN6 45° PTFE Fitting
• 2*AN6 90° PTFE Fitting

Fuel system consisting of：20ft/40ft of 3/8" Fuel Hose,10 Filter with bracket , necessary hardware for a return style system installation

Universal：Suitable for most cars;Complete Kit: Everything you need for installation is included, ensuring a hassle-free setup.

Oil Cooler Specifications

• 10 Row size:13.38'× 6.5'×1.97' inches ; Oil capacity: 0.55L
• 15 Row size:13.38'× 9.45'×1.97' inches ; Oil capacity: 0.8L

Test pressure: 116psi ; Burst pressure: 232psi;

CPE Hose Line

• Material: nylon braided and CPE inner
• Length: 1 x 3.3ft & 1 x 3.9ft;
• Working pressure: 500psi
• Working temperature: -40℉ to 257℉.