Engine Cooling Components

• Universal Compatibility: Works with most cars (sedans, SUVs, modified vehicles) — just ensure sufficient engine bay space for installation.
• Flexible PCV System Integration: Install with the included breather filter (for pre-PCV vehicles, as a vent system) or without (inline between PCV hoses, as a sealed catch can) — adapts to different vehicle setups.
• Precise Size & Connections: 31.5in (0.8m) hose for flexible routing; 3/8" ID/2/3" OD hose + M16*1.5 inlet/outlet threads ensure secure, leak-free connections to PCV systems.

Note: Use an oil can and wrench together for an easier oil change

Note: Use an oil can and wrench together for an easier oil change

• Item Weight：4.49 pounds
• Package Dimensions：‎12.8 x 9.72 x 5.51 inches
• Choose the 10ft or 20ft fuel line kit that fits your needs best.

• [Universal]It can be applied to most cars, making sure there's enough room for Installation.
• [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
• [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil.
• [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.
• Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

• Bracket Kit Included: 1 x Oil Cooler Mounting Bracket , 2 x Accessory Bracket, 8 x Screw , 8 x Nut，1 x Oil Cooler,1 x CPE 6AN Fuel Line Kit.
• Oil Cooler Size:

10 Row:13.38"× 6.5"× 1.97"inch. Oil capacity: 0.55L.
16 Row:12.91"× 5.71"× 1.97"inch. Oil capacity: 0.39L.
19Row:12.91" × 6.67"× 1.97"inch. Oil capacity: 0.45L.
30 Row:12.91"× 10.04"×1.97"inch. Oil capacity: 0.74L.

• Application: Oil cooler is suitable for most vehicles. Please ensure enough space for installation.
• Fuction: The stacked plate oil cooler has high cooling efficiency and improves the lubrication of engine oil. Used to cool engines, transmissions, and rear differentials.
• Material: aluminum alloy made,lightweight cooler mounting.

High-performance 12V radiator cooling fans available in 5 sizes (8-16 inches), featuring powerful 80W motors and efficient blade designs. Each fan kit includes a thermostat relay switch (175-185 Degree) and complete mounting hardware for universal installation.

EVIL ENERGY offers car owners a high-performance, all-in-one overflow tank and oil-air separator kit, designed for high-performance vehicles and tuner cars, which perfectly solves the problems of engine cooling and oil-air recovery. The kit includes an aluminium overflow tank and oil catch can with a highly efficient spacer design that effectively reduces oil build-up and coolant spillage, improving vehicle performance and reliability. Whether you are a racing enthusiast or a tuner, the EVIL ENERGY kit is the ideal choice for you.

The Kit Included: 

• 1 x Transmission Engine oil Cooler
• 2 x 10an to 8an fittings
• 2 x 10an to 6an fittings

Oil Cooler Specifications:

• 7 Row:12.91‘× 2’×1.97‘inch.Oil capacity: 0.15L.
• 10 Row:12.91'× 3.94'×1.97'inch. Oil capacity: 0.24L.
• 16 Row:12.91'× 5.71'×1.97'inch. Oil capacity: 0.39L.
• 19 Row:12.91'× 6.67'×1.97'inch. Oil capacity: 0.45L.
• 30 Row:12.91'× 10.04'×1.97'inch. Oil capacity: 0.74L.
• Test pressure: 116psi; Burst pressure: 232psi.

Application: Oil cooler is suitable for most vehicles. Please ensure enough space for installation.

Core Protection & Performance

• 300ml aluminum baffled catch can with steel ball filter traps oil vapor/moisture, preventing carbon buildup and extending engine life.
• Compatible with sealed (inline PCV) or vented (pre-PCV) setups—flexible for most vehicles.

Installation & Maintenance

• Universal fit (confirm space first); no complex tools needed—complete kit for one-step setup.
• Weekly cleaning required in freezing temps; empty can when ½–¾ full under normal use.

Warranty & Compatibility

• 1-Year warranty for the entire kit; CPE hose compatible with most fuels/fluids (gasoline, diesel, oil).
• Black nylon braid on hose adds abrasion resistance and engine-bay style.

Premium Filtration Performance

• 300ml compact aluminum can with removable baffle + steel ball filter media: effectively traps oil vapor and moisture, preventing carbon buildup in intake tracts, valves, and pistons.
• Black anodized aluminum construction: corrosion-resistant, heat-tolerant, and sleekly styled to fit diverse engine bays.

2-Port Versatility

• Dual-port design supports flexible installation: use with breather filter as a vent system for pre-PCV vehicles, or as a sealed can inline between PCV hoses for modern systems.
• Universal fit for most vehicles (check installation space first) with multi adapter fittings(M16x1.5 to AN6/8/10) included.

Complete Kit Options

• Available in 4 variants with AN6/AN8/AN10 CPE fuel hoses (5FT) and matching swivel fittings (0°/90°), or a basic adapter-only set—choose based on your system needs.
• All kits include essential hardware: mounting bracket, screws, nuts, and a steel wool filter for enhanced separation.

Low-Temp Reliability

• Note: In freezing temperatures, excess moisture may freeze—weekly cleaning or reinstalling the original PCV hose prevents blockages, ensuring year-round performance.

Core Cooling Performance

• Stacked-plate aluminum core: Efficiently lowers oil temp (engine/transmission/differential) to prevent degradation.
• 10ROW/16ROW/19ROW Fits Different Needs.
• Safe & stable: 116 PSI test pressure, 232 PSI burst pressure – anti-leakage.

Durable Build

• Aluminum alloy cooler: Lightweight, corrosion-resistant.
• Nylon-braided CPE hoses: 500 PSI pressure, -40℉~257℉ temp tolerance – durable for extreme use.

Universal & Easy Installation

• Universal fit: Works with most cars/trucks (may need extra accessories).
• Multi-purpose: Cools engine/transmission/differential oil.
• DIY-friendly: Includes instructions, flexible hoses for easy mounting.

Value & Application

• Cost-effective: Extends powertrain life, reduces maintenance.
• Ideal for: Daily drivers, performance builds, racing, hot climates/heavy loads.

Bracket Kit Included: 1 x Oil Cooler Mounting Bracket , 2 x Accessory Bracket, 8 x Screw , 8 x Nut

Oil Cooler Size:

• 10 Row:13.38"× 6.5"×1.97"inch. Oil capacity: 0.55L.
• 15 Row:13.38"× 9.45"×1.97"inch. Oil capacity: 0.55L.
• 16 Row:12.91"× 5.71"×1.97"inch. Oil capacity: 0.39L.

Application: Oil cooler is suitable for most vehicles. Please ensure enough space for installation.

Fuction: The stacked plate oil cooler has high cooling efficiency and improves the lubrication of engine oil. Used to cool engines, transmissions, and rear differentials.

Material: aluminum alloy made,lightweight cooler mounting.

• Important Notice: Equipped with an air filter element only (no internal mesh filter); recommend using with a wrench for easier oil changes; check instruction manual before installation.
• Core Specs: Brand: EVIL ENERGY; Capacity: 750ML; Material: Aluminum; Colors: Black, Silver; Fit Type: Universal (fits most vehicles).
• Dimensions & Fittings: 10AN fittings (thread: 7/8-14 UNF); Bottom pressure relief valve (thread: 3/8 NPT).
• Key Functions: Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation; minimizes oil blow-by and carbon buildup; maintains long-term engine performance.
• User-Friendly Design: Bottom drain valve for easy cleaning/reuse; includes all hardware and instructions for hassle-free installation.
• Warranty & Support: 1-year warranty; 90-day hassle-free return policy; contact support@ievilenergy.com for assistance.

Premium Construction

• Full T-6061 aluminum build with TIG welding and black anodized finish—corrosion-resistant, heat- and pressure-tolerant for leak-free operation
• Dual-hole bracket design enables flexible, stable mounting on frames, panels, or subframes (suits diverse vehicle setups)

Convenient Maintenance

• Integrated bottom drain valve (screws into base) allows oil draining without disassembly—ideal for high-maintenance scenarios (race/off-road cars)
• Reusable design ensures long-term usability with minimal upkeep effort

Engine Protection

• Oil particle separation prevents carbon buildup; large-capacity (1L/2L/3L) design reduces frequent draining (suits high-boost/long high-RPM driving)
• Strategic breather filter captures impurities while maintaining airflow; regular capacity checks recommended to avoid overflow

Versatile Fit

• Installs as vent system (with breather filter) for pre-PCV cars or sealed can (without filter) between PCV hoses
• Includes AN10 fittings (0°/45°/90° swivels, etc.) and optional CPE fuel line kit—fits most cars (check dimensions for space)

Upgrade your ride with EVILENERGY's versatile Oil Catch Can. Universal fit, 300mL capacity. Select with or without breather filter for optimal engine performance and protection. A must-have accessory for any car enthusiast.

3-Port Flexibility

• 3-port design for flexible PCV system/custom setup routing; 10AN fittings (7/8-14 UNF thread) for secure connections

Balanced 750ML Capacity

• Captures oil particles effectively without occupying excess engine bay space; ideal for daily-driven vehicles

Efficient Ventilation & Maintenance

• Top-mounted breather filter enhances ventilation, eliminates intake return lines; bottom drain valve for quick draining
• Internal baffles reduce intake valve carbon buildup, keeping the engine clean

Durable & Compatible

• Precision-machined aluminum, TIG-welded; corrosion/heat-resistant (625PSI max working pressure)
• Universal fit (check engine bay space); includes necessary fittings, optional CPE fuel line kit

Universal：Suitable for most cars;Complete Kit: Everything you need for installation is included, ensuring a hassle-free setup.

Oil Cooler Specifications

• 10 Row size:13.38'× 6.5'×1.97' inches ; Oil capacity: 0.55L
• 15 Row size:13.38'× 9.45'×1.97' inches ; Oil capacity: 0.8L

Test pressure: 116psi ; Burst pressure: 232psi;

CPE Hose Line

• Material: nylon braided and CPE inner
• Length: 1 x 3.3ft & 1 x 3.9ft;
• Working pressure: 500psi
• Working temperature: -40℉ to 257℉.

Core Advantages

• 750ML catch can + 10FT AN10 CPE line; 6061-T6 aluminum + CPE/stainless steel/nylon construction.
• Oil separation protects engine; built-in drain valve for easy maintenance.
• Two options (weld-on/ORB fittings) for universal vehicle compatibility.

Key Specs

• Line: 13.5±1mm ID / 20±1mm OD / 625PSI / -30℃~120℃ / 101.6mm bend radius.
• Fittings: 7/8-14 UNF (AN10) / 0°/90° swivel / 1500PSI.
• Catch Can: 750ML / 3/8-18 NPT drain valve.

Application & Support

• Suitable for street cars, racing builds, off-road vehicles (most makes/models).
• 1-year warranty + 90-day free returns + fast shipping.

1.2L Large Capacity

• Holds more oil particles/moisture; reduces cleaning frequency for high-displacement/performance engines

Dual Breather Filters & Secure Fit

• Maximizes ventilation, relieves crankcase pressure; 10AN to M22 x 1.75 adapters ensure leak-free connections

Durable & Efficient Design

• Aluminum alloy build with TIG-welded seams; withstands high temp/pressure engine bay environments
• Dual internal baffles separate oil particles, reducing intake valve gunk

Easy Maintenance & Universal Fit

• Bottom drain valve for quick, tool-free oil draining
• Fits most vehicles (check engine bay space); ideal for modified setups