All Products

EVILENERGY Fuel Line Kits: Upgrade Your Ride!

• Premium Quality: Crafted with durable materials and robust fittings, our kits offer superior strength and reliability.
• Versatile: Suitable for various automotive applications, ensuring compatibility and performance.
• Complete Kit: Includes necessary fittings and clamps for easy installation.
• Measure Before Purchase: Ensure the perfect fit for your vehicle.Enhance your vehicle's

performance with EVILENERGY's high-performance fuel line kits!

• Material: The fitting is made of 6061-T6 aluminum alloy and includes aluminum washers.
• Parameter: The maximum working pressure is 1,500 PSI, and the working temperature range is -40°F to 250°F.
• Application: The fitting converts a carb fuel inlet to AN threads and fits most carburetors with 5/8-20 inlets.
• Sealing: The AN side of the flare is sealed with a 37-degree angle.

• Connects 3AN or 6AN male flare to 1/4", 5/16", or 3/8" OD hardline using compression adapter.
• Crafted from black anodized aluminum with brass ferrule for leak-free high-pressure sealing.
• Standard 37° AN flare ensures metal-to-metal seal without the need for thread sealant.
• Ideal for fuel delivery, EFI conversions, LS swaps, and custom engine bay plumbing.
• Only compatible with stainless steel or aluminum hardline – not for rubber/Nylon hose setups.

A cast-aluminum front-sump wet oil pan kit for Chevy Gen III/IV LS1, LS2, LS3 and LSX swap projects that cannot use a conventional rear-sump pan. Designed for most wet-sump 4.8L, 5.3L, 5.7L, 6.0L and 6.2L LS-based engines.

• Front-sump wet oil pan layout for LS swap and retrofit projects.
• Low-profile 5.625-inch sump depth for chassis-clearance planning.
• Supports crankshaft strokes up to 4.25 inches.
• 6.0-quart sump capacity; 6.2-quart total capacity with a stock-style filter.
• Baffled cast-aluminum construction with a satin finish.
• Includes oil pickup tube, oil pan gasket, sump baffle and mounting hardware.
• Fits most Gen III/IV wet-sump LS-based engines; does not fit LS7 or LS9 dry-sump applications.
• Vehicle clearance must be measured before ordering; engine height or fore/aft position may require adjustment.

• One-piece full flow design with reinforced curvature for smoother, unrestricted fuel delivery.
  
• Available in AN4 / AN6 / AN8 / AN10 / AN12 sizes, precision-threaded for secure fitment.
  
• Made from 6061-T6 aluminum alloy with black anodized finish for lightweight strength and corrosion resistance.
  
• Supports up to 1500 PSI and -40℉~250℉, ideal for both street performance and racing applications.
  
• Push lock barb design ensures fast installation on rubber fuel lines—add clamps for extra sealing.
  

This comprehensive transmission oil cooler kit includes all essential components for efficient cooling and straightforward installation. It features a high-performance oil cooler, a versatile Insta-Dapt adapter, a durable 5/16" hose (5ft), four secure mounting rods, protective foam pads, reliable hose clamps, and practical mounting clips. The kit ensures easy installation, enhanced durability, and optimal transmission performance, helping to extend engine life by maintaining ideal oil temperatures.

Package Includes：

1. Fuel Cell Gas Tank‎*1（5 / 10 / 15 Gallon Optional)
2. Fuel Pressure Regulator*1
3. 300LPH Inline Fuel Pump Electric*1
4. ‎6AN to M18*1.5 Fitting Adapter*1
5. M12*1.5 to 6AN Fitting Adapter*1
6. 50mm Fuel Filter Mounting Bracket*2
7. 60mm Fuel Filter Mounting Bracket*1
8. 20FT 6AN CPE/PTFE/Antistatic PTFE Fuel Line*1
9. AN10 to AN6 Male Flare Reducer Adapter*2
10. 100 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter*1
11. 10 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter*1
12. 90 Degree Fittings *4
13. 0 Degree Fittings *8

• Before purchasing, please determine the size of fuel line and fitting you need: 4AN, 6AN, 8AN, 10AN.
• Measure the length of the required fuel hose before purchase: 10FT, 20FT, 25FT.
• Save at least 20% OFF on the fuel hose and end kits than buying them individually.

📦 Kit Contains:

- 1 PTFE fuel hose in your chosen length (10FT/20FT/25FT)

- 4 Straight hose fittings (6AN/8AN/10AN optional)

- 2 45-degree hose fittings (6AN/8AN/10AN optional)

- 2 90-degree hose fittings (6AN/8AN/10AN optional)
📝 If you have other kits/bundles you want to buy, please contact our customer service email to give suggestions: support@ievilenergy.com.

• Connects AN female flare to AN ORB male ports with leak-free 37° + O-ring seal.
• Available in straight and 90° versions for tight engine bay routing.
• Built from 6061-T6 aluminum, black anodized for corrosion resistance.
• Rated to 1,500 PSI and -65°F to 212°F for high-performance fuel/oil systems.
• Ideal for fuel rails, regulators, filters, oil coolers, and ethanol-compatible setups.

Core Performance & Compatibility

• 650 CFM 4-barrel design: Performance upgrade for stock to mildly modified V-8 engines
• Mechanical secondary throttle: Immediate, lag-free acceleration for street driving

Convenience & Tuning

• Factory preset electric choke: Automatic temperature adjustment for easy startups
• Pre-calibrated: Ready for street performance out of the box; changeable air bleeds and adjustable needle/seats for fine-tuning

Installation & Build

• Single feed fuel inlet: Simplifies fuel line setup; integrated 700R4/200R4 kickdown cable mounting for easy linkage fitment
• 100% new components (non-remanufactured): 3.25-inch height, square bore flange—fits most street engine bays
• Compatible with GM, Ford, Chrysler AT shift linkages (specific setups may require additional parts)

Direct Replacement:Perfect for 2-bbl street performance upgrades. Officially mandated carburetor for select oval track racing series.
Manual Choke:Cable-driven, hand-operated for precise cold-start control.
30cc Accelerator Pump:Delivers extra fuel for crisp initial acceleration.
A/T Kickdown Compatibility:Works with GM, Chrysler, and Ford automatic transmission kickdown linkage (additional parts may be required).
Power Valve Blow-Out Protection:Built-in safeguard against failure.
100% Wet-Flow Tested:Every unit verified by Evil Energy technicians for immediate installation and performance.
Recommend electric choke type carburetor :350 CFM 2-barrel Carburetor

• Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.
• Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation.
• Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.

Fuel System Kit Specification

Shared Components (Both Versions Include):
✔ LS Fuel Filter Regulator with 6AN adapter fittings
✔ 100 Micron Fuel Filter with 6AN, 8AN, 10AN adapters & mounting bracket
✔ Fuel Pump with pre-installed fittings
✔ Installation Adapters:

• 2× 6AN to 3/8" NPT adapters
• 1× AN6 to 5/16" Quick-Disconnect

Version-Specific Components:
▸ PTFE Version:

• 25FT 6AN PTFE Stainless Braided Hose
• 8× Straight AN6 PTFE Swivel Fittings
• 2× 45° AN6 PTFE Swivel Fittings
• (Superior chemical/heat resistance, low permeation)

▸ CPE Version:

• 25FT 6AN CPE Fuel Hose
• 8× Straight AN6 Standard Swivel Fittings
• 2× 45° AN6 Standard Swivel Fittings
• (Cost-effective, flexible, durable)

Upgrade your fuel system with the EVIL ENERGY Push Lock Hose End Fitting Kit. This 8-piece set includes multiple angles (Straight, 45°, 90°) for flexible installation and smoother routing of fuel lines. Built from 6061-T6 aluminum alloy with a durable black anodized finish, these fittings withstand up to 1500 PSI and extreme temperatures, delivering a leak-free, professional-grade solution for performance builds.