New in

Optimized Street-Strip Performance

• 750 CFM square-bore flow with mechanical secondaries (instant power engagement)
• Dual fuel inlets ensure stable supply during hard acceleration
• Balanced 1.38" primary/secondary venturis for linear power delivery

Precision Calibration

• #74 primary jets (street efficiency) + #80 secondary jets (WOT performance)
• 6.5Hg power valve for controlled fuel enrichment
• 0.031" accelerator pump nozzle for crisp throttle response

Automatic Transmission Ready

• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• Electric choke enables instant cold starts in all conditions
• Low-profile 3.25" height clears stock hoods

High-performance 12V radiator cooling fans available in 5 sizes (8-16 inches), featuring powerful 80W motors and efficient blade designs. Each fan kit includes a thermostat relay switch (175-185 Degree) and complete mounting hardware for universal installation.

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

This kit eliminates the inherent safety risks of the factory grid heater, preventing common issues like loose studs or nuts falling into the engine. Featuring a CNC billet delete plate and an innovative vertical heating coil design, it ensures safe, unrestricted cold starts while maintaining optimal airflow.

When compared to the stock manifold, this upgrade delivers:

• Significantly improved airflow thanks to wider, smoother internal passages.
• Zero airflow restriction by completely removing the OEM heater grid.
• No tuning required and fully emissions-compatible.
• Four 1/8" NPT ports for easy integration of sensors or boost accessories.
• Direct-fit installation with optimized fuel line clearance.

Fits 2007–2024 Ram 2500/3500 6.7L Cummins. Not compatible with Cab & Chassis models.

Direct Replacement:Perfect for 2-bbl street performance upgrades. Officially mandated carburetor for select oval track racing series.
Manual Choke:Cable-driven, hand-operated for precise cold-start control.
30cc Accelerator Pump:Delivers extra fuel for crisp initial acceleration.
A/T Kickdown Compatibility:Works with GM, Chrysler, and Ford automatic transmission kickdown linkage (additional parts may be required).
Power Valve Blow-Out Protection:Built-in safeguard against failure.
100% Wet-Flow Tested:Every unit verified by Evil Energy technicians for immediate installation and performance.

High-Quality Exhaust System

• Durability & Performance: Stainless steel construction ensures durability and heat resistance.
• Enhanced Flow: Reduces back pressure for smoother acceleration and better performance.
• Noise Control: Optimizes exhaust tone for a comfortable driving experience.
• Compatibility: Fits a wide range of vehicles, from sedans to sports cars.
• Easy Installation: Quick and simple with standard clamps.

• Static-Safe – Carbon-lined prevents spark fires
• Extreme Fuel Resistance – Handles ethanol, methanol, race gas
• Reinforced Construction – Smooth bends, no kinks
• Long-Lasting – Outperforms rubber & standard PTFE

Manual Control System

• Manual (Cable driven, hand operated) choke for precise cold start control
• 2-barrel single-stage design reduces operational complexity
• Single fuel inlet enables clean installation
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage.

Balanced Calibration

• #73 main jets optimize fuel delivery for daily performance
• 5.0Hg power valve enhances low-RPM torque efficiency
• High-flow 50cc accelerator pump (0.028" nozzle) ensures immediate response

Proven Compatibility

• 1.688" throttle bore maximizes airflow volume
• Low-profile 3.25" height clears components
• Direct bolt-on fitment for most V8 applications
• Newly Manufactured, not factory refurbished
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

Intelligent Drive System

• Electric choke ensures reliable cold starts in all conditions
• 2-barrel single-stage design reduces maintenance complexity
• Single fuel inlet for simplified installation

Optimized Fuel Calibration

• #74 main jets balance power and fuel efficiency
• 5.0Hg power valve enhances low-RPM torque and economy
• High-capacity 50cc accelerator pump with 0.028' nozzle for immediate response

Universal Fitment

• Street Avenger fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.

Intelligent Drive System

• Electric choke for instant cold starts in all weather conditions
• Vacuum-operated secondaries deliver progressive power transitions
• Single fuel inlet simplifies installation and maintenance
• Performance upgrade for stock to mildly modified V-8 engines

Precision Fuel Calibration

• #66 main jets optimize fuel efficiency for street driving
• 6.5Hg power valve enhances low-RPM torque and economy
• 30cc accelerator pump with 0.031' nozzle ensures crisp throttle response

Engineered Compatibility

• Equal 1.563' throttle bores provide balanced airflow
• Dual venturi design (1.25' primary / 1.31' secondary) optimizes velocity
• 3.25' low-profile height fits most engine bays (GM/Ford/Chrysler AT)

Efficient Operation System

• Electric choke for instant cold starts in all conditions
• 2-barrel simplified design reduces maintenance complexity
• fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• Single fuel inlet enables clean installation

Precision Calibration

• #63 jets optimize fuel efficiency for daily driving
• 30cc accelerator pump ensures crisp throttle response
• 8.5Hg power valve enhances low-RPM torque

Universal Compatibility

• Compact 3.25" height fits restricted engine bays
• 1.5" throttle bore balances airflow and efficiency
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

Claim Within Your Birthday Month (Valid for 30 Days)

• Sign up to become a member – »»🔗Click here
• Birthday info filled in at least 1 month prior:
  Click “Add to Cart”, apply the birthday code from the VIP widget's Available Coupons, and the price will auto-adjust to $0 in your cart.
• No birthday info yet?
  Contact »»📧support@ievilenergy.com, provide your full birthdate and order number, and we’ll add the birthday gift to your order.
• How to Add Your Birthday Info:
  Click the VIP widget, find “Birthday Month Gift” under “Ways to Earn“, and enter your birthdate to enjoy your birthday gift during your birthday month!

More Member Day Events: https://www.ievilenergy.com/blogs/news/evil-energy-members-day

Electric Advantage System

• Air valve-controlled secondaries (vacuum-synced power delivery)
• Single fuel inlet streamlines installation

Street-Tuned Calibration

• #98 primary jets optimize low-RPM torque
• Tri-stage 0.075"x0.047" metering rods ensure crisp transitions
• 1.19" venturi boosts velocity for instant throttle response

Drop-On Compatibility

• Tiered bore design (1.44" primary / 1.69" secondary) balances street/strip performance
• Low-profile 3.25" height clears stock hoods
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.

Manual Dominance System

• Manual choke for absolute throttle control during competition
• Air valve-controlled secondaries (vacuum-modulated power delivery)
• Oversized #113 primary jets for extreme WOT fuel demand

Precision Race Calibration

• Dual-stage metering rods (0.071"x0.047") for 6500RPM+ fuel stability
• 1.44" venturi accelerates airflow velocity (+22% vs standard)
• Equal 1.69" primary/secondary bores maximize high-RPM breathing

Track-Ready Integration

• Direct bolt-on for GM/Ford/Chrysler AT shift linkages (TH400/C6/727)
• Low-profile 3.25" height clears cowl induction hoods
• Can be used with intake manifold 7176.