Evil Energy Best Selling

• Compatibility: Compatible with 2004-2023 F150 2WD 4WD
• Benefits：Forged from 6061-T6 aluminum alloy material sturdy and durable，CNC automatic processing ensure high accuracy and stability, Provide accurate hole position for easy installation，12.9 Grade premium bolts excellent resistance to corrosion by anodized surface and heat treatment
• Function:The kit provides unparalleled ground clearance to conquer off-road obstacles and allow to use larger rims and tires，install it make your truck a cool look
• Installation：completed Installation within 1-2 hours, No cutting and drilling required and does not require strut/coil disassembly like other kits，With instructions to guide you to better installation
• Note：Raise the front of your truck by 3 inch and the rear of your car by 2 inch, Due to suspension geometry,the ratio between lift height and kit thickness is not 1:1

• Compatibility: Compatible with 2004-2023 F150 2WD 4WD
• Benefits：Forged from 6061-T6 aluminum alloy material sturdy and durable，CNC automatic processing ensure high accuracy and stability, Provide accurate hole position for easy installation，12.9 Grade premium bolts excellent resistance to corrosion by anodized surface and heat treatment
• Function:The kit provides unparalleled ground clearance to conquer off-road obstacles and allow to use larger rims and tires，install it make your truck a cool look
• Installation：completed Installation within 1-2 hours, No cutting and drilling required and does not require strut/coil disassembly like other kits，With instructions to guide you to better installation
• Note：Raise the front of your truck by 2 inch, Due to suspension geometry,the ratio between lift height and kit thickness is not 1:1

This EVIL ENERGY thermostat housing kit assembly (OE 2L2Z8592AA) is a direct bolt-on replacement for the 4.0L V6 engine found in the 2002-2010 Ford Explorer, 2002-2003 Ford Explorer Sport, 2007-2010 Ford Explorer Sport Trac, and 2002-2010 Mercury Mountaineer. If your factory housing is cracking, leaking coolant at the seam, or your engine is running hotter than usual, this assembly restores accurate coolant flow control without the cost of a dealer part.

Replace heat-aged ignition wires on 32039-style 2003–2006 Dodge Ram 1500 5.7L HEMI reference applications. This eight-piece 8.5mm silicone wire set has preinstalled 90-degree DD-style boots; compare the original layout before ordering.

EVIL ENERGY Cold Air Intake Kit: Elevate Your Ford Diesel's Performance

• Powerful Performance: Enhances horsepower and torque.
• High-Flow Design: Smooths airflow, maximizes engine efficiency.
• Sporty Exhaust Note: Intense sound for an exhilarating drive.
• User-Friendly: Easy installation, all accessories included.
• Premium Filter: Washable, reusable for sustained performance.

In conclusion, the EVIL ENERGY Cold Air Intake Kit is tailored for 2017-2019 Ford F250/F350/F450/F550 6.7L Powerstroke Diesels, promising a noticeable boost in power and a thrilling driving experience.

What it is: A one-piece adapter that converts a male metric engine port into a female 1/8" NPT port, so a standard aftermarket gauge or sender can thread in without modifying the engine.

Sizes: M12x1.5, M14x1.5, M16x1.5, M18x1.5 male to 1/8" NPT female.

Most common use: Fitting an aftermarket oil pressure sender or coolant temperature sensor to a GM LS engine or any metric-ported engine during a swap or gauge install.

Material and rating: 6061-T6 aluminum, 1,500 PSI maximum, -65°F to 250°F.

Seals with: An included aluminum crush washer on the metric side and thread sealant on the NPT side.

• 6061-T6 Aluminum with Black Anodized Finish: Lightweight yet durable billet construction with corrosion-resistant black anodized coating for automotive and racing environments.
• 37-Degree AN Flare Seal: Precision-machined flare seat ensures a positive, vibration-resistant seal at high pressure for consistent fuel and oil flow.
• Leak-Free Disconnect: Automatically seals fluid path on both male and female sides when disconnected, preventing fluid loss and contamination during pit stops and maintenance.
• Motorsport-Grade Applications: Ideal for oil cooler lines, fuel return lines, and any liquid/gas transport system requiring frequent connections with zero fluid spillage.