All Products

This kit eliminates the inherent safety risks of the factory grid heater, preventing common issues like loose studs or nuts falling into the engine. Featuring a CNC billet delete plate and an innovative vertical heating coil design, it ensures safe, unrestricted cold starts while maintaining optimal airflow.

When compared to the stock manifold, this upgrade delivers:

• Significantly improved airflow thanks to wider, smoother internal passages.
• Zero airflow restriction by completely removing the OEM heater grid.
• No tuning required and fully emissions-compatible.
• Four 1/8" NPT ports for easy integration of sensors or boost accessories.
• Direct-fit installation with optimized fuel line clearance.

Save 15% today! Code: EVIM15

Fits 2007–2024 Ram 2500/3500 6.7L Cummins. Not compatible with Cab & Chassis models.

Compatible with 1999-2014 Chevrolet V8 4.8L/5.3L/6.0L (LS-based engines).

Upgrade your automotive fluid transfer system with the EVIL ENERGY AN Hose End Fitting Swivel. Designed for compatibility with CPE braided hoses, these fittings offer versatility and durability. Available in sizes 4/6/8/10/12/16/20 AN, these fittings are suitable for a wide range of applications.

The EVIL ENERGY Female-to-Female AN Union Fitting is a compact and reliable solution for connecting two AN male hose ends. CNC-machined from 6061-T6 aluminum and anodized in black, this straight-through adapter supports 360° swivel, 1500 PSI working pressure, and a precise 37° flare seal. Ideal for EFI conversions, LS swaps, or any high-pressure fluid system where modular plumbing and clean routing are key.

• 90° Compact Elbow Design – Optimized right-angle configuration improves hose routing in tight engine bays, reducing line stress and sharp bends.
• Dual Sealing System – 37° AN flare provides secure metal-to-metal sealing, while the 60° tapered NPT thread ensures tight pipe-side engagement.
• Multiple AN to NPT Combinations – Wide size range supports custom fuel, oil, coolant, and power steering system builds.
• 6061-T6 Aluminum Construction – Lightweight yet high-strength material with corrosion-resistant black anodized finish.
• Performance-Ready Fitment – Designed for high-pressure automotive fluid systems and easy wrench installation.

• AN female to AN male flare adapter, compatible with 3AN/4AN/6AN/8AN/10AN/12AN applications.
• Made from high-strength 6061-T6 aluminum alloy with black anodized finish for durability.
• 37° flare sealing design ensures a reliable, leak-free connection.
• 360° swivel construction allows quick, hassle-free installation.
• Withstands up to 1500 PSI working pressure and -65℉ to 252℉ temperature range.

• Universal Sizes: Available in 4AN, 6AN, 8AN, 10AN, and 12AN to match common fuel line setups.
• Strong & Durable: Made from lightweight 6061-T6 aluminum alloy, anodized for corrosion resistance.
• High Performance: Withstands up to 1500 PSI and operates in -40℉ to 248℉, ensuring leak-free performance.
• Quick Installation: Push-lock design for rubber fuel hoses; secure with clamps for maximum sealing.
• Wide Application: Ideal for fuel systems, oil systems, and performance modifications.

• Precision Fitment – Available in AN3, AN4, AN6, AN8, AN10, AN12 with UNF thread sizing for accurate hose-to-fuel system connections.
• High Pressure & Temperature Rated – Supports up to 1500 PSI working pressure and -40°F to 248°F temperature range for reliable performance.
• Optimized for Tight Spaces – 45° angled design and 360° swivel head simplify routing in compact or angled fuel line installations.
• Leak-Free Seal – 37° flare ensures a secure, anti-leak connection without additional sealants.
• Durable Construction – Made from 6061-T6 aluminum alloy with a black anodized coating for corrosion resistance and long service life.

Built for flexibility and reliability, the EVIL ENERGY Push Lock Fuel Hose SAE 30R7 is a go-to solution for fuel system routing. Made from durable NBR rubber reinforced with braided polyester, it supports up to 300 PSI and resists wear, heat, and fuel additives. Ideal for custom setups in classic cars, LS swaps, oil coolers, and more, this hose is compatible with gasoline, diesel, biodiesel, and oil.

Performance-Boosting Aluminum Fuel Cells

Upgrade your ride with the EVILENERGY Aluminum Fuel Cell! Built from tough 1060-H24 aluminum, it features a 8AN inlet/outlet, a 0-90 ohm level sensor for smooth fuel delivery and added safety. Perfect for fuel or diesel, this high-performance fuel cell ensures reliability and durability for track or street use. Get yours today and fuel your drive with confidence!

Upgrade your vehicle with the EVIL ENERGY LS Swap Fuel Kit! 

This comprehensive kit includes: 

• 30-70PSI fuel pressure regulator
• 300LPH high flow fuel pump
• 6AN 20FT CPE/PTFE Durable fuel lines  .
• 40-micron fuel filter 
• necessary fittings for easy installation. 

Fitment: This kit is compatible with most vehicles that use LS engine swaps, including popular models from Chevrolet, GMC, and other brands that accommodate the LS engine configuration. It features universal fittings, making it suitable for custom builds.

EVIL ENERGY AN Flare Reducer & Expander Adapters provide the perfect solution for transitioning between AN line sizes during fuel system upgrades or engine swaps. Made from durable 6061-T6 aluminum and black anodized for corrosion resistance, these fittings support up to 1500 PSI and are designed with a precision 37° flare seal. Compatible with fuel, oil, and coolant systems—ideal for LS swaps, EFI builds, and custom plumbing setups.

EVILENERGY Fuel Line Kits: Power, Performance, and Reliability!

• Upgrade with EVILENERGY's fuel line kits. Durable Nylon and CPE rubber hoses, reinforced with 304 steel wire, ensure strength. Available in 4AN, 6AN, 8AN, 10ANand 12AN sizes, each kit includes a 20FT line and fittings for easy install. Wide temp range (-22°F to 248°F) and high pressure make them reliable. Measure before purchase. Enhance your ride today!