All Products

• [Universal]It can be applied to most cars, making sure there's enough room for Installation.
• [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
• [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil.
• [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.
• Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

EVILENERGY Fuel Line Kits: Power, Performance, and Reliability!

• Upgrade with EVILENERGY's fuel line kits. Durable Nylon and CPE rubber hoses, reinforced with 304 steel wire, ensure strength. Available in 4AN, 6AN, 8AN, 10ANand 12AN sizes, each kit includes a 20FT line and fittings for easy install. Wide temp range (-22°F to 248°F) and high pressure make them reliable. Measure before purchase. Enhance your ride today!

Kit Components: Braided nylon fuel hose + aluminum alloy swivel fittings

Hose Specs: 4/6/8/10/12AN sizes; 10/12/16/20FT lengths; Black/Black&Red colors

Hose Structure: 3-layer (CPE inner + 304 stainless steel mesh + nylon braid)

Fitting Quantity & Types:
- 6PCS: 2×Straight + 2×45° + 2×90° swivel ends;
- 10PCS: 4×Straight + 2×45° + 2×90° + 2×80° swivel ends;
- 12PCS: 4×Straight + 2×45° + 2×90° + 2×180° swivel ends + 2×(AN-AN or AN-NPT) fittings
Pressure Ratings: Max working pressure 500-750PSI; bursting pressure 1500-2250PSI

Applications: Suitable for transmission fluid, oil, race gas, fuel, diesel, hydraulic fluid, vacuum

Warranty: 6 months

• Size: M14*1.5 male-to-barb fitting thread; compatible with 3/8" ID pipe; 1L storage volume.
• Fitment: Universal coolant reservoir tank, suitable for most vehicles (measure installation space before purchase).
• Note: Features tight-closed cap, fully TIG-welded construction, and O-ring gasket on threads for leak prevention; Teflon tape is recommended during installation to enhance airtightness.
• Function: When radiator coolant pressure exceeds cap setting, coolant flows into the tank via overflow tube; bottom port for radiator overflow, top port for tank overflow.
• Warranty: 1-year warranty provided by EVIL ENERGY.

• EVIL ENERGY intank fuel pump fit for 12V DC EFI system only.
• Test flow：255LPH (43PSI), 190LPH (80PSI), Operating Pressure: 15-90 PSI, final fuel pressure set by regulator.
• Applicable fuel: gasoline, E85 and ethanol gasoline with less ethanol content than E85. (high impurity gasoline will directly affect the pump life)
• Note: The diameter of 255LPH high-flow intank electric fuel pump may be different from the original model, but it will not affect the use. Hoses, filters or other equipment may need to be replaced. Professional installation is highly recommended.

Perfect for a hassle-free installation!

Includes:

• External Fuel Pump Kit: 300 LPH
• 6AN 20FT Fuel hose*2
• 100-Micron Pre-Filter
• 30-Micron Post Filter
• Installation Hardware

• Bundle with: EVIL ENERGY 6AN Adjustable Fuel Pressure Regulator and 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided 25FT
• Universal fuel regulator fit for most vehicle's EFI system.Adjustable fuel pressure: 30psi -70psi/20-120psi/30-140psi.Adjust the set screw on top to get the desired pressure.
• When installing fuel regulator NPT pressure gauge port,please use thread sealant tape for sealing.PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.
• Hose Size&Medium: ID: 5/16". OD: 0.465inch. Length: 25feet. Compatible with all automotive fuels, lubricants, and coolants.
• Hose Parameter: Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.

This kit eliminates the inherent safety risks of the factory grid heater, preventing common issues like loose studs or nuts falling into the engine. Featuring a CNC billet delete plate and an innovative vertical heating coil design, it ensures safe, unrestricted cold starts while maintaining optimal airflow.

When compared to the stock manifold, this upgrade delivers:

• Significantly improved airflow thanks to wider, smoother internal passages.
• Zero airflow restriction by completely removing the OEM heater grid.
• No tuning required and fully emissions-compatible.
• Four 1/8" NPT ports for easy integration of sensors or boost accessories.
• Direct-fit installation with optimized fuel line clearance.

Save 15% today! Code: EVIM15

Fits 2007–2024 Ram 2500/3500 6.7L Cummins. Not compatible with Cab & Chassis models.

EVIL ENERGY offers car owners a high-performance, all-in-one overflow tank and oil-air separator kit, designed for high-performance vehicles and tuner cars, which perfectly solves the problems of engine cooling and oil-air recovery. The kit includes an aluminium overflow tank and oil catch can with a highly efficient spacer design that effectively reduces oil build-up and coolant spillage, improving vehicle performance and reliability. Whether you are a racing enthusiast or a tuner, the EVIL ENERGY kit is the ideal choice for you.

✔ MULTI-MICRON PROTECTION: Choose 10/30/40/100 micron filtration for your exact needs
✔ 3-IN-1 ADAPTER SYSTEM: Includes 1/2", 3/8" & 5/16" barb fittings - fits most fuel lines
✔ PREMIUM CONSTRUCTION: Aircraft-grade aluminum body + stainless steel filter element
✔ Compatible with gasoline, diesel，etc.
✔ MAINTENANCE MADE EASY: Removable design for quick cleaning/replacement

Fuel Cell Gas Tank‎：15 Gallon: Size: 19" (L) x 17" (W) x 10.03" (H), mounting tab measure diameter 3.46" , inlet/outlet fitting:10an

External Inline Fuel Pump Electric：300LPH
‎Fitting Adapter：AN to M12*1.5&AN to M18*1.5
Fuel Filter Mounting Bracket：50mm&60mm
PTFE Fuel Line： 20FT
Male Flare Reducer Adapter：AN to AN Fitting
Inline Fuel Filter：10&100 Micron，30&100Micron
Fuel Pressure Regulator：20-120PSI (6AN) & 30-140PSI (8AN & 10AN)

PTFE Hose End Fitting：Straight&90 Degree

📦Kit Includes:

• 33FT PTFE Fuel Line
• Straight Swivel Fittings*8
• 45° Swivel Fittings*4
• 90° Swivel Fittings*4
• 180° Swivel Fittings*4
• Hose separator clamp*4

EVIL ENERGY’s 45° AN Hose End Fitting delivers precision routing and secure sealing for fuel, oil, or transmission line builds. Designed from lightweight yet strong 6061-T6 aluminum and anodized in black for durability, this 45° fitting combines a compact bend angle with full 360° swivel. Available from 4AN to 20AN, it’s compatible with stainless and nylon braided hoses, and rated for up to 1500 PSI—ideal for LS swaps, EFI conversions, and space-constrained engine bays.