Fuel & Intake Systems

EVIL ENERGY Cold Air Intake Kit: Boost Your Duramax Performance

• Power Upgrade: Enhances horsepower and torque.
• Optimized Airflow: Outside filter for cooler, denser air.
• Sporty Sound: Deep, aggressive exhaust note.
• Effortless Install: All necessary accessories included.
• Washable Filter: High-quality, reusable for efficiency.

In summary, the EVIL ENERGY Cold Air Intake Kit is designed for 2004-2005 GMC Sierra/Chevy Silverado 6.6L Duramax LLY models, offering a simple yet effective way to improve your vehicle's performance and driving experience.

• Compatibility: Fits 2009-2013 Chevy Tahoe/Avalanche/Silverado 1500/Suburban 1500, GMC Sierra 1500/Yukon, Cadillac Escalade ESV/EXT.
• Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
• Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing power.
• Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.
• Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).
• Sound: Aggressive tone under acceleration; quiet at cruising speeds.

Manual Control System

• Manual (Cable driven, hand operated) choke for precise cold start control
• 2-barrel single-stage design reduces operational complexity
• Single fuel inlet enables clean installation
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage.

Balanced Calibration

• #73 main jets optimize fuel delivery for daily performance
• 5.0Hg power valve enhances low-RPM torque efficiency
• High-flow 50cc accelerator pump (0.028" nozzle) ensures immediate response

Proven Compatibility

• 1.688" throttle bore maximizes airflow volume
• Low-profile 3.25" height clears components
• Direct bolt-on fitment for most V8 applications
• Newly Manufactured, not factory refurbished
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

EVIL ENERGY Dual Air Intake Kit: Upgrade Your Dodge Ram's Performance

• Power Increase: Enhances horsepower and torque.
• Quality Materials: Black powder-coated aluminum alloy.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: All accessories included, simple tool installation.
• Efficient Filter: Washable, reusable cone air filter.

In summary, the EVIL ENERGY Dual Air Intake Kit is designed for 2003-2008 Dodge Ram 1500 and compatible models, offering a performance boost with improved throttle response and a stylish, sporty sound.

Compatibility: Fits 2011-2023 Chrysler 300/300C 3.6L, 2011-2023 Dodge Challenger/Charger 3.6L.

Installation: 40-minute setup with basic tools; no cutting/drilling required.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing power.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 85mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2013-2018 Dodge (RAM 2500-5500/Challenger/Charger), Chrysler 300, Jeep GC (5.7L/6.4L); 2014-2018 Durango (with TPS)

EVIL ENERGY Cold Air Intake Kit: Optimize Your Dodge Ram's Power

• Performance Gain: Boosts horsepower and torque.
• Cool Air Flow: Maximizes oxygen intake for efficient combustion.
• Sporty Sound: Enhances driving with a deep, aggressive note.
• Easy Install: Simple installation, all necessary parts included.
• Durable Filter: High-quality, washable, and reusable.

In summary, the EVIL ENERGY Cold Air Intake Kit is designed to enhance the performance of your 2003-2007 Dodge Ram 2500/3500 with a 5.9L Cummins engine, offering a straightforward upgrade for improved throttle response and engine efficiency.

Compatibility: Exclusively for 2014-2018 Chevy Silverado 1500/GMC Sierra 1500 5.3L/6.2L.Please confirm fitment before purchase.
Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
Power & Torque Improvement- Unlock your engine’s potential with the EVIL ENERGY cold air intake system. Experience increased horsepower for quicker acceleration and more responsive power at higher speeds. Enhanced torque improves throttle response and delivers stronger hill-climbing performance.
High-Efficiency Air Filter-The multi-layer cotton air filter delivers over 98% filtration efficiency and is fully washable and reusable. Clean it every 100,000 miles to protect your engine from harmful contaminants and debris. A pre-filter blocks larger particles to extend the filter life in dusty environments.
High-Flow Cold Air Delivery-Engineered with a precision-bent&large-diameter aluminum tube for ultra-smooth airflow and increased horsepower—unlike plastic alternatives. Its polished finish adds a durable, custom look under the hood, while the fitted heat shield blocks engine heat to deliver cooler, denser air. Built to perform and last.
Hear the Engine Roar- Unleash your engine’s true sound with a deeper, more aggressive tone under acceleration, while maintaining a smooth and quiet ride at cruising speeds. Enjoy the perfect blend of performance and refinement.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 92mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2010-2014 Chevy Camaro SS (LS3/L99), 2009-2013 Corvette (LS3/LS7), 2011-2014 Caprice, 2014 Chevy SS, 2009 Pontiac G8 (LS3/L76) (with TPS)

Fitment: GM LS1/LS2/LS6

Fuel Rail：
- Fits: For stock LS1/2/6 fuel injectors
- Material: Billet aluminum construction
- Includes: Mounting brackets, Crossover line, and Hardware 3/8" line diameter with -8 fittings

Intake Manifold:
- Finish: Satin
- Material: Aluminum
- Type: Single Plane
- Includes: Intake Manifold、Mounting Hardware

Bundle:
- Includes: Fuel Rail Kit + Intake Manifold

Efficient Operation System

• Electric choke for instant cold starts in all conditions
• 2-barrel simplified design reduces maintenance complexity
• fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• Single fuel inlet enables clean installation

Precision Calibration

• #63 jets optimize fuel efficiency for daily driving
• 30cc accelerator pump ensures crisp throttle response
• 8.5Hg power valve enhances low-RPM torque

Universal Compatibility

• Compact 3.25" height fits restricted engine bays
• 1.5" throttle bore balances airflow and efficiency
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

Compatibility:

• 2009-2018 Dodge Ram 1500 5.7L
• 2019-2023 Ram 1500 Classic 5.7L

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air)

Sound: Aggressive tone under acceleration; quiet at cruising speeds

Compatibility: Exclusively for 2012-2018 Jeep Wrangler JK 3.6L GAS engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, and hill-climbing capability.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

Core Advantages

• Multi-purpose: Fuel lines, coolers, turbo systems, etc.
• Broad compatibility (excludes E85/E10); 4/6/8/10AN sizes.

Build & Performance

• Material: CPE inner + 304 stainless steel + nylon braid.
• Pressure: 750PSI (625PSI for 10AN); Temp: -22°F to 248°F.

Application

• Suitable for street cars, high-performance builds, racing, off-roading.
• Note: Do Not fit E85, E10 Ethanol Fuel

EVIL ENERGY Cold Air Intake Kit: Empower Your Duramax Diesel

• Power Enhancement: Boosts horsepower and torque.
• Optimized Airflow: Positioned for maximum oxygen intake.
• Sporty Exhaust: Intense, deep sound for a thrilling drive.
• Simple Install: All necessary accessories included.
• Efficient Filter: Washable, reusable for optimal performance.

In summary, the EVIL ENERGY Cold Air Intake Kit is designed to enhance the performance of your 2001-2004 LB7 6.6L Duramax Chevrolet/GMC Sierra 2500HD 3500HD, offering a straightforward upgrade for improved throttle response and engine efficiency.

Performance-Calibrated Core

• 650 CFM airflow (supports 300–450 HP) + mechanical secondaries—instant throttle response, stable high-RPM operation.
• Factory-calibrated: #70/#74 jets + 1.30" balanced venturis + 6.5Hg power valve—precise air-fuel mixture.
• Dual fuel inlets—steady fuel delivery under heavy load (fuel inlet thread: 7/8-20in).

Durable & Customizable Build

• High-quality aluminum body with satin finish—corrosion-resistant, lightweight, sleek engine bay look.
• Electric choke (compatible with electric-to-manual conversion kit) for flexible control.
• 100% new machined components—matches premium brand quality (Holley/Edelbrock).

Hassle-Free Installation & Compatibility

• Bolt-on square-bore design—easy installation with no complex modifications.
• Universal fit: GM/Ford/Chrysler AT shift linkages + most performance intake manifolds.
• Compact 3.25-inch height—fits tight engine bays; fuel line center-to-center: 9.5in.

Upgrade your vehicle with the EVIL ENERGY EFI Fuel System Kit! This comprehensive kit includes a 10 Micron Filter with Bracket and a powerful 300LPH high flow fuel pump. It also comes with a 10-micron fuel filter and all necessary fittings for easy installation.