Fuel & Intake Systems

EVIL ENERGY Cold Air Intake Kit: Optimize Performance for Nissan & Infiniti

• Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
• Efficient Design: Black powder-coated aluminum for optimal airflow.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: Includes all necessary hardware for simple setup.
• Washable Filter: High-quality, reusable cone air filter.

In summary, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2008-2017 Nissan 370Z or 2008-2013 Infiniti G37 3.7L V6, delivering improved throttle response and performance with a straightforward installation.

Compatibility: Exclusively for 2018-2024 Jeep Wrangler JL and Gladiator JT 3.6L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Core Versatility

• Multi-purpose application: Ideal for fuel supply/return, transmission oil cooler, coolant, vacuum, turbo cooler, or oil feed lines.
• Broad fluid compatibility: Works with transmission fluid, oil, race gas, diesel, hydraulic fluid, and vacuum.

Premium Durability

• Construction: CPE rubber inner + 304 stainless steel wire helix + nylon outer braid; aluminum alloy fittings.
• Abrasion/corrosion-resistant: Withstands harsh engine bay conditions for long-lasting use.

High-Performance Specs

• Working pressure: 750psi; Bursting pressure: 2250psi (stable under extreme load).
• Temperature range: -22°F to 248°F (adapts to all climates and driving scenarios).

Package include

• 10FT CPE Fuel Line
• 6 swivel ends (2×straight/2×45°/2×90°)
• 2 × separator clamps
• 2×AN to 1/4" NPT fittings.

Application & Value

• Suitable for: Street vehicles, high-performance builds, racing, off-roading, and automotive repairs.
• Note:Do Not fit E85,E10 Ethanol Fuel

Street-Optimized Performance Core

• 600 CFM airflow (supports 250–400 HP) + vacuum secondaries—adapts to vehicle weight/gearing for smooth power delivery.
• Factory-calibrated: #66 jets, 30cc accelerator pump, 6.5Hg power valve (with blow-out protection) + asymmetric venturis (1.25"/1.31").
• Manual choke (cable-actuated): Precise cold-start control for all climates.

Durable Premium Construction

• Vibratory polished aluminum body: Corrosion-resistant, lightweight, and sleek engine bay aesthetic.
• 100% wet-flow tested: Ensures leak-free, out-of-the-box performance with no break-in tuning.
• Precision CNC-machined components: Matches the durability of top brands (Holley, Edelbrock).

Universal Compatibility & Installation

• Square-bore flange (5 3/16" x 5 5/8"): Direct replacement for Holley/Edelbrock/Carter AFB/Autolite carburetors.
• Integrated 700R4/200R4 kickdown mounting: Compatible with GM/Ford/Chrysler AT linkages (additional parts may be needed).
• Bolt-on design: Hassle-free installation with no complex modifications.

Value & Application

• Ideal for: Daily drivers, weekend cruisers, and stock to mildly modified V8 street builds.
• Restrictions: No marine use; not for California pollution-regulated vehicles.

Optimized Street-Strip Performance

• 750 CFM square-bore flow with mechanical secondaries (instant power engagement)
• Dual fuel inlets ensure stable supply during hard acceleration
• Balanced 1.38" primary/secondary venturis for linear power delivery

Precision Calibration

• #74 primary jets (street efficiency) + #80 secondary jets (WOT performance)
• 6.5Hg power valve for controlled fuel enrichment
• 0.031" accelerator pump nozzle for crisp throttle response

Automatic Transmission Ready

• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• Electric choke enables instant cold starts in all conditions
• Low-profile 3.25" height clears stock hoods

Direct Control System

• Manual choke Adjustable Needle and Seats
• Mechanical secondary throttle enables instantaneous power delivery
• Single fuel inlet simplifies installation

Balanced Performance Calibration

• #70 primary / #74 secondary jets optimize RPM-specific fueling
• 6.5Hg power valve enhances mid-range power efficiency
• 0.031" accelerator pump nozzle ensures crisp transition response

Engineered Fitment

• Performance upgrade for stock to mildly modified V-8 engines
• equipped with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and ability to mount brackets for Chrysler vehicles.
• Integrated 700R4/200R4 transmission kick down cable mounting

EVIL ENERGY Cold Air Intake Kit: Power Boost for Your Dodge

• Enhanced Performance: Increases horsepower and torque.
• Efficient Design: Black powder-coated aluminum for optimal airflow.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: Includes all necessary mounting accessories.
• Premium Filter: Washable, reusable for 95% filtration efficiency.

In summary, the EVIL ENERGY Cold Air Intake Kit with Red Filter is perfect for upgrading your 2005-2010 Hemi 5.7L/6.1L V8 Diesel, offering improved throttle response and a sporty sound with an easy installation process.

Automatic Transmission Optimized

• Precisely calibrated for GM/Ford/Chrysler AT shift linkages
• 500 CFM flow tailored to 305-390ci engines in full-size sedans/trucks
• Square-bore flange for direct OEM manifold replacement

Street-Smart Performance

• Electric choke ensures one-touch cold starts (ideal for daily drivers)
• #86 primary jets + #95 secondary jets
• Mechanical secondaries provide predictable throttle progression

Classic-Friendly Engineering

• 3.25" height clears stock air cleaners
• Staged throttle bores (1.44"/1.69") enhance low-RPM torque for automatic shifts
• Single-line fuel inlet retains original plumbing

Fuel Cell Gas Tank‎: 10 gallon：Size: 16-inch (L) x 16-inch (W) x 9.05-inch (H), mounting tab measure diameter of 3.46-inch, inlet/outlet fitting: 10 AN

Fuel Lines: 20FT AN8 CPE black braided hoses: ID: 0.43-inch. OD: 0.64-inch

5FT 5/32-inch Vacuum Hose： ID:4m.OD:10mm

External Inline Fuel Pump Electric：300LPH

Fuel Pressure Regulator：20-120PSI

Inline Fuel Filter：10&100 Micron

Fittings: Swivel Hose End: Straight,45°,90°,180°

Additional Components: Y-Block, AN to ORB adapters, AN to AN Fittings, Bulkhead Fittings, and Hose clamps.

Application: Compatible with most modified and race-prepped vehicles.Ideal for LS swaps, turbocharged or supercharged engines, and high-flow fuel requirements.

Fitment:

• Fit Cadillac LS engines V8
• 2007-2008 Cadillac Escalade ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 Cadillac Escalade ESV ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 Cadillac Escalade EXT ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Chevrolet LS engines V8
• 2010-2015 Chevrolet Camaro ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2008-2013 Chevrolet Corvette ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2014-2017 Chevrolet SS ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2008-2008 Chevrolet Tahoe ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit GMC LS engines V8
• 2007-2008 GMC Sierra 1500 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 GMC Yukon ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 GMC Yukon XL 1500 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Hummer LS engines V8
• 2008-2008 Hummer H2 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Pontiac LS engines V8
• 2009-2009 Pontiac G8 ▪6.2L/376, EFI, Single Plain, Square Bore Flange

Core Performance & Compatibility

• 650 CFM 4-barrel design: Performance upgrade for stock to mildly modified V-8 engines (street-focused power & drivability)
• Mechanical secondary throttle: Immediate, lag-free acceleration for street driving and cruising
• Compatible with GM, Ford, Chrysler AT shift linkages (specific setups may require additional parts)

Convenience & Tuning

• Factory preset electric choke: Automatic temperature adjustment for easy cold starts (no manual choke hassle)
• Pre-calibrated: #70 main jets / #74 secondary jets / 0.031-inch pump nozzle—ready for street use out of the box; fine-tuning optional
• Complete kit: Includes all fuel system accessories (hose, filter, pump, regulator, fittings) to avoid separate purchases

Installation & Build

• 100% new components: 3.25-inch height, square bore flange—fits most street engine bays
• Durable build: Shiny aluminum carburetor + 20FT AN6 push-lock hose + 110LPH 12V fuel pump—built for long-term street reliability
• Dual-precision filtration: 100/40 micron filters protect the carburetor and engine from debris; 5-12 PSI regulator maintains stable fuel pressure

EVIL ENERGY VW Jetta Cold Air Intake Kit: Enhance Your Drive

• Performance Upgrade: 7-10% more horsepower, 6-8% more torque.
• Cool Air Flow: Outside filter placement for denser, cooler air.
• Sporty Sound: Deep, aggressive exhaust note.
• Easy Install: No additional parts needed, all accessories included.
• Washable Filter: High-quality, reusable for sustained performance.

In conclusion, the EVIL ENERGY Cold Air Intake Kit is an excellent performance enhancer for your 1999-2004 VW Golf Jetta 2.8 VR6 Diesel, offering an easy-to-install solution for improved throttle response and a sporty driving experience.

High-Performance Core with Advanced Technology

• 800 CFM+ Annular Flow Boosters (8 orifices) – superior fuel atomization, no flat spots, near EFI-like drivability.
• Qwik-Tune Air Valve-Controlled Secondaries – smooth RPM transitions + quick-change metering rods (no carb removal for tuning).
• Backfire-resistant design (no power valves) + tune-holding calibration – consistent performance without frequent re-tuning.

User-Friendly & Durable Design

• Electric choke – automatic temperature adjustment for effortless cold starts in all climates.
• Two-piece construction – float adjustments/component replacement without fuel draining or carb removal.
• 100% new machined components – no remanufactured parts, ensuring reliability in demanding conditions.

Universal Compatibility

• Square-bore flange – fits most performance intake manifolds.
• Works with GM, Ford, and Chrysler automatic transmission shift linkages (additional parts may be require

Value & Application

• Premium performance – matches top-tier models (e.g., Edelbrock AVS2) with no brand markup.
• Ideal for: High-horsepower street builds, daily drivers, and spirited racing applications.
• Restrictions: Requires new fuel filter; not compatible with alcohol/race/E85 fuel.