All Products

Upgrade your build with the EVIL ENERGY Quick Release V-Band Clamp Kit. Engineered for high-performance turbo, exhaust, and downpipe applications, this kit features a reusable, tool-free quick-release mechanism and precision male/female flanges for easy, secure, and leak-free connections. Built with durability and speed in mind—this is a must-have for fabricators and racers demanding reliability under pressure.

✔ Perfect Fit: Direct replacement for Mercedes C-Class W203 RWD (2001-2007) – No modifications needed.
✔ 2-4" Height Adjustment: Achieve the perfect low stance or optimized track setup.
✔ 32-Level Damping: Tune from comfortable daily driving to aggressive track performance.
✔ High-Strength Steel Springs: 60,000+ cycle fatigue life – built to last.
✔ Track & Street Ready: Mono-tube shocks for superior handling & stability.

⚙️ Professional installation recommended for best performance.

Fuel Rail：
- Fits: For stock LS1/2/6 fuel injectors
- Material: Billet aluminum construction
- Includes: Mounting brackets, Crossover line, and Hardware 3/8" line diameter with -8 fittings

Intake Manifold:
- Finish: Satin
- Material: Aluminum
- Type: Single Plane
- Includes: Intake Manifold、Mounting Hardware

External Inline Fuel Pump Electric：300LPH
‎Fitting Adapter：6AN to M12*1.5&6AN to M18*1.5
Fuel Filter Mounting Bracket：50mm&60mm
PTFE Fuel Line： 40FT
Inline Fuel Filter：10&100 Micron
Fuel Pressure Regulator：20-120PSI
PTFE Hose End Fitting：Straight,45 Degree,90 Degree

Performance Boost: Dual-plane design for improved throttle response, power, and torque.

RPM Range: Optimized for engines running from 1,500 to 6,500 RPM.

Lightweight Aluminum: Strong and lightweight for high-performance applications.

Additional Features: Nitrous bosses, rear water crossover, and square bore carburetor flange.

Fitment: Fits small block Ford 221, 260, 289, and 302 engines. Ideal for street performance builds.

Low Profile Design: Ideal hood clearance for a clean installation.

This EVIL ENERGY thermostat housing kit assembly (OE 2L2Z8592AA) is a direct bolt-on replacement for the 4.0L V6 engine found in the 2002-2010 Ford Explorer, 2002-2003 Ford Explorer Sport, 2007-2010 Ford Explorer Sport Trac, and 2002-2010 Mercury Mountaineer. If your factory housing is cracking, leaking coolant at the seam, or your engine is running hotter than usual, this assembly restores accurate coolant flow control without the cost of a dealer part.

EVIL ENERGY Heat-Shield Air Intake Kit: Optimize Your Ford Diesel's Performance

• Enhanced Power: Increases horsepower and torque.
• Cool Air Flow: Positioned outside engine for maximum oxygen intake.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: All accessories included, no extra parts needed.
• Quality Filter: Washable, reusable for 95% filtration efficiency.

Upgrade your 2008-2010 Ford F250 F350 F450 Diesel with EVIL ENERGY for superior engine performance.

Boost Your Ford's Power with Evil Energy!

Upgrade your 1983-1993 Ford Mustang SVO or Thunderbird XR4Ti with our high-performance exhaust manifold. Designed for 2.3L engines, it boosts horsepower and enhances sound.

• Compatibility: Compatible with 2004-2023 F150 2WD 4WD
• Benefits：Forged from 6061-T6 aluminum alloy material sturdy and durable，CNC automatic processing ensure high accuracy and stability, Provide accurate hole position for easy installation，12.9 Grade premium bolts excellent resistance to corrosion by anodized surface and heat treatment
• Function:The kit provides unparalleled ground clearance to conquer off-road obstacles and allow to use larger rims and tires，install it make your truck a cool look
• Installation：completed Installation within 1-2 hours, No cutting and drilling required and does not require strut/coil disassembly like other kits，With instructions to guide you to better installation
• Note：Raise the front of your truck by 3 inch and the rear of your car by 2 inch, Due to suspension geometry,the ratio between lift height and kit thickness is not 1:1

• Compatibility: Compatible with 2004-2023 F150 2WD 4WD
• Benefits：Forged from 6061-T6 aluminum alloy material sturdy and durable，CNC automatic processing ensure high accuracy and stability, Provide accurate hole position for easy installation，12.9 Grade premium bolts excellent resistance to corrosion by anodized surface and heat treatment
• Function:The kit provides unparalleled ground clearance to conquer off-road obstacles and allow to use larger rims and tires，install it make your truck a cool look
• Installation：completed Installation within 1-2 hours, No cutting and drilling required and does not require strut/coil disassembly like other kits，With instructions to guide you to better installation
• Note：Raise the front of your truck by 2 inch, Due to suspension geometry,the ratio between lift height and kit thickness is not 1:1

• 6061-T6 Aluminum with Black Anodized Finish: Lightweight yet durable billet construction with corrosion-resistant black anodized coating for automotive and racing environments.
• 37-Degree AN Flare Seal: Precision-machined flare seat ensures a positive, vibration-resistant seal at high pressure for consistent fuel and oil flow.
• Leak-Free Disconnect: Automatically seals fluid path on both male and female sides when disconnected, preventing fluid loss and contamination during pit stops and maintenance.
• Motorsport-Grade Applications: Ideal for oil cooler lines, fuel return lines, and any liquid/gas transport system requiring frequent connections with zero fluid spillage.

What it is: A one-piece adapter that converts a male metric engine port into a female 1/8" NPT port, so a standard aftermarket gauge or sender can thread in without modifying the engine.

Sizes: M12x1.5, M14x1.5, M16x1.5, M18x1.5 male to 1/8" NPT female.

Most common use: Fitting an aftermarket oil pressure sender or coolant temperature sensor to a GM LS engine or any metric-ported engine during a swap or gauge install.

Material and rating: 6061-T6 aluminum, 1,500 PSI maximum, -65°F to 250°F.

Seals with: An included aluminum crush washer on the metric side and thread sealant on the NPT side.

Replace heat-aged ignition wires on 32039-style 2003–2006 Dodge Ram 1500 5.7L HEMI reference applications. This eight-piece 8.5mm silicone wire set has preinstalled 90-degree DD-style boots; compare the original layout before ordering.