Tag is not equal to Fuel System

• One-piece full flow design with reinforced curvature for smoother, unrestricted fuel delivery.
  
• Available in AN4 / AN6 / AN8 / AN10 / AN12 sizes, precision-threaded for secure fitment.
  
• Made from 6061-T6 aluminum alloy with black anodized finish for lightweight strength and corrosion resistance.
  
• Supports up to 1500 PSI and -40℉~250℉, ideal for both street performance and racing applications.
  
• Push lock barb design ensures fast installation on rubber fuel lines—add clamps for extra sealing.
  

• Material: The fitting is made of 6061-T6 aluminum alloy and includes aluminum washers.
• Parameter: The maximum working pressure is 1,500 PSI, and the working temperature range is -40°F to 250°F.
• Application: The fitting converts a carb fuel inlet to AN threads and fits most carburetors with 5/8-20 inlets.
• Sealing: The AN side of the flare is sealed with a 37-degree angle.

• Connects 3AN or 6AN male flare to 1/4", 5/16", or 3/8" OD hardline using compression adapter.
• Crafted from black anodized aluminum with brass ferrule for leak-free high-pressure sealing.
• Standard 37° AN flare ensures metal-to-metal seal without the need for thread sealant.
• Ideal for fuel delivery, EFI conversions, LS swaps, and custom engine bay plumbing.
• Only compatible with stainless steel or aluminum hardline – not for rubber/Nylon hose setups.

• Before purchasing, please determine the size of fuel line and fitting you need: 4AN, 6AN, 8AN, 10AN.
• Measure the length of the required fuel hose before purchase: 10FT, 20FT, 25FT.
• Save at least 20% OFF on the fuel hose and end kits than buying them individually.

📦 Kit Contains:

- 1 PTFE fuel hose in your chosen length (10FT/20FT/25FT)

- 4 Straight hose fittings (6AN/8AN/10AN optional)

- 2 45-degree hose fittings (6AN/8AN/10AN optional)

- 2 90-degree hose fittings (6AN/8AN/10AN optional)
📝 If you have other kits/bundles you want to buy, please contact our customer service email to give suggestions: support@ievilenergy.com.

• Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.
• Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation.
• Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.

Upgrade your fuel system with the EVIL ENERGY Push Lock Hose End Fitting Kit. This 8-piece set includes multiple angles (Straight, 45°, 90°) for flexible installation and smoother routing of fuel lines. Built from 6061-T6 aluminum alloy with a durable black anodized finish, these fittings withstand up to 1500 PSI and extreme temperatures, delivering a leak-free, professional-grade solution for performance builds.

Compatibility: Fits 2011-2023 Chrysler 300/300C 3.6L, 2011-2023 Dodge Challenger/Charger 3.6L.

Installation: 40-minute setup with basic tools; no cutting/drilling required.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing power.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 102mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: Chevrolet LS2/LS3/LS7/LSX, CTS-V (with TPS)
   Note: For the most accurate fitment, please refer to the measurements shown in the product images.
   
   

Core Versatility

• Multi-purpose application: Ideal for fuel supply/return, transmission oil cooler, coolant, vacuum, turbo cooler, or oil feed lines.
• Broad fluid compatibility: Works with transmission fluid, oil, race gas, diesel, hydraulic fluid, and vacuum (excludes E85/E10 ethanol fuel).

Premium Durability

• Construction: CPE rubber inner + 304 stainless steel wire helix + nylon outer braid; aluminum alloy fittings.
• Abrasion/corrosion-resistant: Withstands harsh engine bay conditions (heat, chemicals, vibration) for long-lasting reliability.
• Flexible routing: Minimum bending radius ranges from 2.0"(50.8mm) to 4.5"(114.3mm) based on AN size.

High-Performance Specs

• Working pressure: 750PSI (AN4/6/8), 625PSI (AN10), 500PSI (AN12).
• Bursting pressure: 2250PSI (AN4/6/8), 1875PSI (AN10), 1500PSI (AN12) – stable under extreme load.
• Temperature range: -22°F to 248°F (-30°C to 120°C) – adapts to all climates and driving scenarios.

Package Include

• 1 × 33FT CPE Fuel Line (Black Cotton Braided)
• 8 × 0° Swivel Fittings (Black Aluminum Alloy)
• 4 × 45° Swivel Fittings (Black Aluminum Alloy)
• 4 × 90° Swivel Fittings (Black Aluminum Alloy)
• 4 × 180° Swivel Fittings (Black Aluminum Alloy)
• 4 × AN4 Fuel Line Clamps (Black)

Application & Value

• Suitable for: Street vehicles, high-performance builds, racing, off-roading, and automotive repairs/maintenance.
• Easy installation: Complete fitting kit and flexible design simplify routing and connection.
• Note: Do Not fit E85, E10 Ethanol Fuel – ensure compatibility with your fluid type before use.

Direct Replacement:Perfect for 2-bbl street performance upgrades. Officially mandated carburetor for select oval track racing series.
Manual Choke:Cable-driven, hand-operated for precise cold-start control.
30cc Accelerator Pump:Delivers extra fuel for crisp initial acceleration.
A/T Kickdown Compatibility:Works with GM, Chrysler, and Ford automatic transmission kickdown linkage (additional parts may be required).
Power Valve Blow-Out Protection:Built-in safeguard against failure.
100% Wet-Flow Tested:Every unit verified by Evil Energy technicians for immediate installation and performance.
Recommend electric choke type carburetor :350 CFM 2-barrel Carburetor

• Connects AN female flare to AN ORB male ports with leak-free 37° + O-ring seal.
• Available in straight and 90° versions for tight engine bay routing.
• Built from 6061-T6 aluminum, black anodized for corrosion resistance.
• Rated to 1,500 PSI and -65°F to 212°F for high-performance fuel/oil systems.
• Ideal for fuel rails, regulators, filters, oil coolers, and ethanol-compatible setups.