Tag is not equal to Fuel System

Compatibility: Fits 2011-2023 Chrysler 300/300C 3.6L, 2011-2023 Dodge Challenger/Charger 3.6L.

Installation: 40-minute setup with basic tools; no cutting/drilling required.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing power.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

Direct Replacement:Perfect for 2-bbl street performance upgrades. Officially mandated carburetor for select oval track racing series.
Manual Choke:Cable-driven, hand-operated for precise cold-start control.
30cc Accelerator Pump:Delivers extra fuel for crisp initial acceleration.
A/T Kickdown Compatibility:Works with GM, Chrysler, and Ford automatic transmission kickdown linkage (additional parts may be required).
Power Valve Blow-Out Protection:Built-in safeguard against failure.
100% Wet-Flow Tested:Every unit verified by Evil Energy technicians for immediate installation and performance.
Recommend electric choke type carburetor :350 CFM 2-barrel Carburetor

• Complete kit includes 4 straight, 2×45°, 2×90° hose ends – perfect for custom fuel line routing
• Made from 6061-T6 aluminum, black anodized for strength and corrosion resistance
• 360° swivel design allows flexible installation even in tight engine bays
• Rated for 1,500 PSI and -65°F to 252°F – ideal for performance fuel, oil, or coolant lines
• Designed to work exclusively with EVIL ENERGY braided CPE fuel hoses (stainless or nylon)
• Reusable fittings – easy to disassemble and reposition without damage

• Parameter: Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 250℉.
• Sealing: The AN side is sealed by a 37 degree angle.
• Material: Made of aluminum alloy 6061-T6.
• Feature: Features a unique cutter style and one piece full flow design for smoother flow.

Bundle Contents: 10AN Baffled Oil Catch Can (750ML) + Universal Coolant Overflow Tank (1L/2L)

Material: Both products made of corrosion-resistant aluminum

Fit: Universal design, suitable for most vehicles (check installation space)

Key Benefits: Prevents oil buildup (catch can); maintains coolant levels (overflow tank); enhances engine performance & reliability

Maintenance: Oil catch can has drain valve for easy cleaning; coolant tank features leak-resistant design

EVIL ENERGY Cold Air Intake Kit: Upgrade Your Ford Diesel

• Enhanced Performance: Improves horsepower and torque.
• Optimal Airflow: Positioned for maximum cold air intake.
• Sporty Sound: Deep, aggressive exhaust note.
• Easy Install: All necessary hardware included.
• Durable Filter: Washable, reusable for efficiency.

In summary, the EVIL ENERGY Cold Air Intake Kit is designed for 2003-2007 Ford 6.0 Powerstroke Diesel trucks, offering a simple yet effective performance boost with improved throttle response and a dynamic driving experience

• Universal AN sizes: 4AN, 6AN, 8AN, 10AN, 12AN for flexible fuel system upgrades.
• Heavy-duty strength: 6061-T6 aluminum alloy with black anodized finish, durable and corrosion-resistant.
• High performance ready: Rated up to 1500 PSI and -40℉~248℉, engineered for street, racing, and custom builds.
• Quick installation: Push-lock barb design allows fast connection to rubber fuel lines—just push and secure with clamps.
• Leak-free reliability: Precision-machined threads and barbs ensure a tight seal under extreme pressure.

• SAE J1527 A1-15 Certified for inboard and outboard marine fuel applications — ensures low permeation and EPA/CARB compliance
• Compatible with gasoline, diesel, E85 ethanol, biodiesel, and blended fuels
• High-pressure rated: 300 PSI working pressure, 900 PSI burst pressure
• Triple-layer construction: NBR inner tube, polyester braid reinforcement, NBR+PVC outer, UV & weather resistant
• Meets EPA/CARB, ISO 7840 Type A1, and NMMA/CE standards — trusted for boat and marine use

2.5/3.0 Inch Electric Exhaust Valve: Boost Your Ride

• Fitment: Fits 2.5/3.0 inch exhaust pipes. Confirm space for installation.
• Features: Enhances performance with a deep, aggressive sound. Professional install advised.
• Specs: Stainless steel pipes, aluminum alloy valve. 3.5m wire, 12V, 100m remote range.
• Environment: Works 0℃-150℃. Avoid extreme weather.
• Support: Check remote battery and motor response if not working.

Upgrade your vehicle with our electric exhaust valve for a powerful sound and enhanced performance

• [Fitment]:Compatible with 2014-2018 Chevy Silverado 1500 5.3L & 6.2L,2015-2020 Chevy Tahoe 5.3L& 6.2L,2015-2020 Chevy Suburban 5.3L& 6.2L,2014-2018 GMC Sierra 1500 5.3L& 6.2L,2015-2020 GMC Yukon/Yukon XL 5.3L & 6.2L,2015-2019 Cadillac Escalade 6.2L.
• [Installation Location]:In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]:It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]:The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

• Connects AN female flare to AN ORB male ports with leak-free 37° + O-ring seal.
• Available in straight and 90° versions for tight engine bay routing.
• Built from 6061-T6 aluminum, black anodized for corrosion resistance.
• Rated to 1,500 PSI and -65°F to 212°F for high-performance fuel/oil systems.
• Ideal for fuel rails, regulators, filters, oil coolers, and ethanol-compatible setups.

VW Golf MK4 1998-2007 VW Beetle 1998-2010 Seat Leon 1999-2006 VW Jetta MK4 1999-2005

Compatibility:

• 2009-2018 Dodge Ram 1500 5.7L
• 2019-2023 Ram 1500 Classic 5.7L

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air)

Sound: Aggressive tone under acceleration; quiet at cruising speeds

• DIY Custom Exhaust Kit
  Designed for custom exhaust fabrication projects.
• Mandrel Bent Pipes
  Smooth bends maintain consistent exhaust flow.
• Aluminum Plated Iron Construction
  Better corrosion resistance than raw steel.
• Slip-Fit Expanded Ends
  Easier cutting, fitting, and welding.
• Universal 2.5 inch Fitment
  Ideal for hot rods, street cars, and custom builds.

1. Boosts top-tier performance: Precisely regulates air intake for optimal air-fuel ratio, delivers immediate robust power, and stabilizes idle speed for smooth rides
2. Enhances fuel economy: Works seamlessly with auto-start/stop & cruise control to cut fuel use and save costs
3. 200ms fast response: Equally quick acceleration (opening) and deceleration (closing), sharpens throttle sensitivity
4. Optimized valve shape: Reduces low-RPM torque losses for consistent power output
5. 90mm bore for power gains: Engineered for huge horsepower increases, meets strict OE standards for reliable performance
6. Wide compatibility: Fits 2013+ Dodge Challenger SRT HEMI 5.7L/6.1L/6.4L (with TPS)