Tag is not equal to Fuel System

• LS Swap EFI Specific Kit
  Designed for GM LS EFI fuel system conversions.
• Complete 6AN PTFE Hose Ends
  Straight, 45°, 90°, and 180° fittings included.
• Quick Connect Ready
  Adapters for GM 3/8" & 5/16" fuel rail connections.
• NPT Integration Support
  Easily connects pumps, filters, and regulators.
• Reusable CNC Aluminum Fittings
  Built for PTFE hose and high-pressure EFI systems.

High-Quality Exhaust System

• Durability & Performance: Stainless steel construction ensures durability and heat resistance.
• Enhanced Flow: Reduces back pressure for smoother acceleration and better performance.
• Noise Control: Optimizes exhaust tone for a comfortable driving experience.
• Compatibility: Fits a wide range of vehicles, from sedans to sports cars.
• Easy Installation: Quick and simple with standard clamps.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 85mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2013-2018 Dodge (RAM 2500-5500/Challenger/Charger), Chrysler 300, Jeep GC (5.7L/6.4L); 2014-2018 Durango (with TPS)

A complete AN fitting solution for high-performance fuel and transmission setups.
This 6/8/10AN hose end fitting kit includes swivel fittings in multiple angles, AN6 male-to-male coupler, and hose separator clamps. Designed for CPE or nylon braided hose, it ensures a leak-free, professional-grade connection for your custom build.

• Note: Use an oil can and wrench together for an easier oil change

It can be applied to most cars, making sure there's enough room for Installation. You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option.

Compatibility: Exclusively for 2014-2018 Chevy Silverado 1500/GMC Sierra 1500 5.3L/6.2L.Please confirm fitment before purchase.
Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
Power & Torque Improvement- Unlock your engine’s potential with the EVIL ENERGY cold air intake system. Experience increased horsepower for quicker acceleration and more responsive power at higher speeds. Enhanced torque improves throttle response and delivers stronger hill-climbing performance.
High-Efficiency Air Filter-The multi-layer cotton air filter delivers over 98% filtration efficiency and is fully washable and reusable. Clean it every 100,000 miles to protect your engine from harmful contaminants and debris. A pre-filter blocks larger particles to extend the filter life in dusty environments.
High-Flow Cold Air Delivery-Engineered with a precision-bent&large-diameter aluminum tube for ultra-smooth airflow and increased horsepower—unlike plastic alternatives. Its polished finish adds a durable, custom look under the hood, while the fitted heat shield blocks engine heat to deliver cooler, denser air. Built to perform and last.
Hear the Engine Roar- Unleash your engine’s true sound with a deeper, more aggressive tone under acceleration, while maintaining a smooth and quiet ride at cruising speeds. Enjoy the perfect blend of performance and refinement.

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

Sizes:

• AN4: 7/16"-20 UNF
• AN6: 9/16"-18 UNF
• AN8: 3/4"-16 UNF
• AN10: 7/8"-14 UNF
• AN12: 1-1/16"-12 UNF

Material: Constructed from durable 6061-T6 aluminum alloy, this AN to BSP fitting is black anodized for resistance to oil, rust, and corrosion.

Sealing Design: The AN side features a 37-degree angle seal for a secure connection.

Compatible Fluids: Suitable for engine oil, diesel, and fuel oil.

Application: Connects AN internal threads to BSP internal threads for use with fuel pumps, fuel injectors, and other fuel system components.

• Connects 6AN or 8AN male flare to 3/8" OD hardline using a 90° aluminum compression adapter.
• Built from black anodized aluminum with brass ferrule for secure and corrosion-resistant seal.
• Features 37° AN flare for leak-proof metal-to-metal sealing, no Teflon tape needed.
• Perfect for tight routing in custom fuel systems, LS swaps, and engine bay upgrades.
• Compatible only with stainless steel or aluminum hardlines – not for use with rubber or nylon hose.

Boss-Level Stance! These 2" billet 6061-T6 spacers bolt straight onto 2019-23 Ram 1500 Classic & 2012-18 Ram 1500, pushing wheels 50 mm out for wider, meaner, vibration-free stance. T6 aluminum + 10.9-grade studs = light & bulletproof. CNC anodized black, 10-min install, instant head-turner on road or trail!