Google ads

VW Golf MK4 1998-2007 VW Beetle 1998-2010 Seat Leon 1999-2006 VW Jetta MK4 1999-2005

Compatibility:

• 2009-2018 Dodge Ram 1500 5.7L
• 2019-2023 Ram 1500 Classic 5.7L

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air)

Sound: Aggressive tone under acceleration; quiet at cruising speeds

• DIY Custom Exhaust Kit
  Designed for custom exhaust fabrication projects.
• Mandrel Bent Pipes
  Smooth bends maintain consistent exhaust flow.
• Aluminum Plated Iron Construction
  Better corrosion resistance than raw steel.
• Slip-Fit Expanded Ends
  Easier cutting, fitting, and welding.
• Universal 2.5 inch Fitment
  Ideal for hot rods, street cars, and custom builds.

1. Boosts top-tier performance: Precisely regulates air intake for optimal air-fuel ratio, delivers immediate robust power, and stabilizes idle speed for smooth rides
2. Enhances fuel economy: Works seamlessly with auto-start/stop & cruise control to cut fuel use and save costs
3. 200ms fast response: Equally quick acceleration (opening) and deceleration (closing), sharpens throttle sensitivity
4. Optimized valve shape: Reduces low-RPM torque losses for consistent power output
5. 90mm bore for power gains: Engineered for huge horsepower increases, meets strict OE standards for reliable performance
6. Wide compatibility: Fits 2013+ Dodge Challenger SRT HEMI 5.7L/6.1L/6.4L (with TPS)

✔ STOP CARBURETOR FLOODING! Precision-adjustable 4.5-9PSI range prevents overflow
✔ COMPLETE INSTALL KIT Includes pressure gauge, mounting bracket & all fittings
✔ MULTI-FUEL READY Works with gasoline, E85, ethanol & alcohol fuels (6061-T6 aluminum body)
✔ UNIVERSAL FIT 3/8IN NPT to AN6 ports adapt to most carbureted systems

• Versatile ORB-to-ORB Connector – Adapts two AN ORB male ports with a 360° swivel design for quick, flexible installs
• Leak-Free Performance – Each end is sealed with O-rings, ensuring reliable, vibration-resistant connections under 1,500 PSI
• Built for Harsh Environments – CNC-machined from 6061-T aluminum and black anodized to resist fuel corrosion, heat, and abrasion
• Track-Tested Durability – Operating from -40°F to 250°F, this adapter is ideal for high-performance fuel, oil, water, or coolant lines
• Multiple AN Sizes – Available in 6AN, 8AN, 10AN, and 12AN variants to suit a wide range of plumbing setups

• Precision AN Size Conversion
  Converts female AN to larger or smaller male AN connections for seamless fuel system upgrades and custom routing.
• 37 Degree AN Flare Seal
  Utilizes a true 37 degree flare sealing surface to ensure leak free high pressure performance.
• 6061 T6 Aluminum Construction
  CNC machined from lightweight yet strong 6061 T6 aluminum with black anodized corrosion resistant finish.
• 1500 PSI High Pressure Rated
  Designed to handle demanding fuel oil and cooling system applications including EFI builds.
• Swivel Design for Easy Alignment
  Female swivel end allows precise clocking and alignment during installation reducing hose stress.
  

• Premium Multi-Layer Construction – Built with CPE outer layer, NBR rubber inner tube, and polyester braid reinforcement for strength, flexibility, and leak resistance.
• High Pressure Performance – Rated for 750 PSI working pressure and 1450 PSI burst, ensuring reliability in both daily driving and racing environments.
• Push Lock Installation – Quick and secure hose connection without special tools; clamps included for enhanced sealing.
• Universal Compatibility – Works with fuel, oil, diesel, engine oil, and is ideal for fuel pumps, tanks, filters, regulators, and oil coolers.
• Three AN Sizes Available – 1/4" (4AN), 5/16" (5AN), and 3/8" (6AN), each kit comes with 20FT hose and 10 clamps.

• Connects 3AN brake or fuel lines in a T-shaped layout with a built-in mounting tab for secure chassis installation
• Precision-machined 304 stainless steel resists corrosion, heat, and high-pressure environments.
• Withstands extreme temperatures from -50℃ to 800℃ (58℉ to 1472℉), ideal for race and street use.
• 37° flare sealing on all ports ensures leak-free performance without extra sealants.
• Perfect for brake line splits, clutch lines, power steering routing, and fuel system branching.