Google ads

A complete AN fitting solution for high-performance fuel and transmission setups.
This 6/8/10AN hose end fitting kit includes swivel fittings in multiple angles, AN6 male-to-male coupler, and hose separator clamps. Designed for CPE or nylon braided hose, it ensures a leak-free, professional-grade connection for your custom build.

• Note: Use an oil can and wrench together for an easier oil change

It can be applied to most cars, making sure there's enough room for Installation. You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option.

Compatibility: Exclusively for 2014-2018 Chevy Silverado 1500/GMC Sierra 1500 5.3L/6.2L.Please confirm fitment before purchase.
Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
Power & Torque Improvement- Unlock your engine’s potential with the EVIL ENERGY cold air intake system. Experience increased horsepower for quicker acceleration and more responsive power at higher speeds. Enhanced torque improves throttle response and delivers stronger hill-climbing performance.
High-Efficiency Air Filter-The multi-layer cotton air filter delivers over 98% filtration efficiency and is fully washable and reusable. Clean it every 100,000 miles to protect your engine from harmful contaminants and debris. A pre-filter blocks larger particles to extend the filter life in dusty environments.
High-Flow Cold Air Delivery-Engineered with a precision-bent&large-diameter aluminum tube for ultra-smooth airflow and increased horsepower—unlike plastic alternatives. Its polished finish adds a durable, custom look under the hood, while the fitted heat shield blocks engine heat to deliver cooler, denser air. Built to perform and last.
Hear the Engine Roar- Unleash your engine’s true sound with a deeper, more aggressive tone under acceleration, while maintaining a smooth and quiet ride at cruising speeds. Enjoy the perfect blend of performance and refinement.

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

Sizes:

• AN4: 7/16"-20 UNF
• AN6: 9/16"-18 UNF
• AN8: 3/4"-16 UNF
• AN10: 7/8"-14 UNF
• AN12: 1-1/16"-12 UNF

Material: Constructed from durable 6061-T6 aluminum alloy, this AN to BSP fitting is black anodized for resistance to oil, rust, and corrosion.

Sealing Design: The AN side features a 37-degree angle seal for a secure connection.

Compatible Fluids: Suitable for engine oil, diesel, and fuel oil.

Application: Connects AN internal threads to BSP internal threads for use with fuel pumps, fuel injectors, and other fuel system components.

• Connects 6AN or 8AN male flare to 3/8" OD hardline using a 90° aluminum compression adapter.
• Built from black anodized aluminum with brass ferrule for secure and corrosion-resistant seal.
• Features 37° AN flare for leak-proof metal-to-metal sealing, no Teflon tape needed.
• Perfect for tight routing in custom fuel systems, LS swaps, and engine bay upgrades.
• Compatible only with stainless steel or aluminum hardlines – not for use with rubber or nylon hose.

Boss-Level Stance! These 2" billet 6061-T6 spacers bolt straight onto 2019-23 Ram 1500 Classic & 2012-18 Ram 1500, pushing wheels 50 mm out for wider, meaner, vibration-free stance. T6 aluminum + 10.9-grade studs = light & bulletproof. CNC anodized black, 10-min install, instant head-turner on road or trail!

• SAE 30R7 Rated Fuel Hose
  Meets and exceeds SAE 30R7 standards for low pressure fuel systems and carbureted applications.
• 300 PSI Working Pressure
  Rated at 300 PSI with 1200 PSI burst pressure for stable and safe fuel delivery.
• NBR Rubber with Reinforced Braiding
  Constructed from oil resistant NBR rubber and braided polyester fiber for durability and abrasion resistance.
• Push Lock Easy Installation Design
  Push lock construction allows secure hose installation without clamps in low pressure systems.
• Multi Fuel Compatibility
  Compatible with gasoline diesel biodiesel oil and grease for broad automotive applications.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 92mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2010-2014 Chevy Camaro SS (LS3/L99), 2009-2013 Corvette (LS3/LS7), 2011-2014 Caprice, 2014 Chevy SS, 2009 Pontiac G8 (LS3/L76) (with TPS)

Efficient Operation System

• Electric choke for instant cold starts in all conditions
• 2-barrel simplified design reduces maintenance complexity
• fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• Single fuel inlet enables clean installation

Precision Calibration

• #63 jets optimize fuel efficiency for daily driving
• 30cc accelerator pump ensures crisp throttle response
• 8.5Hg power valve enhances low-RPM torque

Universal Compatibility

• Compact 3.25" height fits restricted engine bays
• 1.5" throttle bore balances airflow and efficiency
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

Vehicle Fitment

• fit for 1988-2000 GM GMT400 Platform: C/K Trucks, Tahoe/Yukon, Suburban & Escalade V8 Engines (5.7L-7.4L)

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug
• 8S-Type blades Fan

Upgrade your 2019-2023 Ram 1500 with EVIL ENERGY 6X5.5 wheel spacers.

Crafted from high-quality 6061-T6 aircraft-grade aluminum, these spacers enhance stability and performance while providing a stylish look.

• AN to NPT Conversion
  Connects AN hose ends to NPT threaded ports cleanly.
• 37° Flare Seal Design
  Provides a reliable, leak-resistant AN connection.
• High Pressure Rated
  Handles up to 1500 PSI for demanding systems.
• 6061-T6 CNC Aluminum
  Lightweight, corrosion-resistant, and durable.
• Multi-System Use
  Ideal for fuel and cooling system applications.