Fuel & Intake Systems

Core Performance & Compatibility

• 650 CFM 4-barrel design: Performance upgrade for stock to mildly modified V-8 engines (street-focused power & drivability)
• Mechanical secondary throttle: Immediate, lag-free acceleration for street driving and cruising
• Compatible with GM, Ford, Chrysler AT shift linkages (specific setups may require additional parts)

Convenience & Tuning

• Factory preset electric choke: Automatic temperature adjustment for easy cold starts (no manual choke hassle)
• Pre-calibrated: #70 main jets / #74 secondary jets / 0.031-inch pump nozzle—ready for street use out of the box; fine-tuning optional
• Complete kit: Includes all fuel system accessories (hose, filter, pump, regulator, fittings) to avoid separate purchases

Installation & Build

• 100% new components: 3.25-inch height, square bore flange—fits most street engine bays
• Durable build: Shiny aluminum carburetor + 20FT AN6 push-lock hose + 110LPH 12V fuel pump—built for long-term street reliability
• Dual-precision filtration: 100/40 micron filters protect the carburetor and engine from debris; 5-12 PSI regulator maintains stable fuel pressure

EVIL ENERGY VW Jetta Cold Air Intake Kit: Enhance Your Drive

• Performance Upgrade: 7-10% more horsepower, 6-8% more torque.
• Cool Air Flow: Outside filter placement for denser, cooler air.
• Sporty Sound: Deep, aggressive exhaust note.
• Easy Install: No additional parts needed, all accessories included.
• Washable Filter: High-quality, reusable for sustained performance.

In conclusion, the EVIL ENERGY Cold Air Intake Kit is an excellent performance enhancer for your 1999-2004 VW Golf Jetta 2.8 VR6 Diesel, offering an easy-to-install solution for improved throttle response and a sporty driving experience.

The Professional Products Typhoon Intake Manifold for Ford Small Block Windsor 351W engines (5.8L/351 in³) is designed for street performance, providing improved top-end power and maintaining strong low-end torque. Made from lightweight aluminum, this dual-plane intake manifold features advanced provisions like nitrous bosses, a rear water crossover, and a square bore carburetor flange. It's perfect for aggressive street cam setups and ideal for performance enthusiasts seeking optimal airflow and engine cooling.

Core Performance

• 750 CFM airflow, supports 350–550 HP for high-performance small-block/big-block V8 engines.
• Air Valve-Controlled Secondaries: Smooth power progression at high RPM, prevents bogging.
• Backfire-resistant metering rod system (no power valve): Avoids blow-out risks; quick rod swaps without carb removal/fuel draining.

Durability & Versatility

• Lightweight corrosion-resistant aluminum: 2-piece warpage-resistant body, compatible with gasoline, gasohol, and blended fuels.
• 100% brand-new (non-remanufactured): Precision CNC-machined components, 100% wet-flow tested for leak-free performance.
• User-friendly design: Tub-type bowls + rear-pivot floats for hassle-free long-term use.

Installation & Compatibility

• Bolt-on square-bore flange: Straightforward installation
• Optimized for Ford 460 Big Block FE engines
• Compatible with GM/Ford/Chrysler AT shift linkages (excludes Ford AT requiring kickdown).
• Electric choke: Automatic cold-start control for all climates.

Key Restrictions

• Not for marine use, supercharged systems, RPM/Torker II intake manifolds.
• Requires additional parts for original Chevrolet 305 Quadrajet intake manifolds.

Compatibility: Exclusively for 2012-2021 Toyota Tundra 5.7L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

High-Performance Core with Advanced Technology

• 800 CFM+ Annular Flow Boosters (8 orifices) – superior fuel atomization, no flat spots, near EFI-like drivability.
• Qwik-Tune Air Valve-Controlled Secondaries – smooth RPM transitions + quick-change metering rods (no carb removal for tuning).
• Backfire-resistant design (no power valves) + tune-holding calibration – consistent performance without frequent re-tuning.

User-Friendly & Durable Design

• Electric choke – automatic temperature adjustment for effortless cold starts in all climates.
• Two-piece construction – float adjustments/component replacement without fuel draining or carb removal.
• 100% new machined components – no remanufactured parts, ensuring reliability in demanding conditions.

Universal Compatibility

• Square-bore flange – fits most performance intake manifolds.
• Works with GM, Ford, and Chrysler automatic transmission shift linkages (additional parts may be require

Value & Application

• Premium performance – matches top-tier models (e.g., Edelbrock AVS2) with no brand markup.
• Ideal for: High-horsepower street builds, daily drivers, and spirited racing applications.
• Restrictions: Requires new fuel filter; not compatible with alcohol/race/E85 fuel.

Precision Control System

• Manual choke for direct throttle adjustment
• Air valve-controlled secondary throttle (vacuum-modulated)
• Single fuel inlet simplifies fuel line routing

Engineered Calibration

• #100 primary jets optimize mid-range fuel delivery
• 0.070" x 0.047" metering rods ensure smooth acceleration transitions
• 1.19" venturi diameter boosts airflow velocity

Direct-Fit Compatibility

• Tiered throttle bores (1.44-inch primary / 1.69-inch secondary) for balanced airflow
• 3.25-inch low-profile design clears OEM hoods
• Factory-calibrated for GM/Ford/Chrysler AT linkages (TH350/C4/727)

EVIL ENERGY Cold Air Intake Kit: Dodge Ram Performance Enhancement

• Power Increase: Boosts horsepower and torque.
• Cool Air Benefit: Ensures optimal air intake for combustion.
• Sporty Exhaust: Delivers a deep, aggressive sound.
• Simple Install: Easy setup with all accessories included.
• Efficient Filter: Washable and reusable for long-term use.

To conclude, the EVIL ENERGY Cold Air Intake Kit is an excellent upgrade for 2002-2008 Dodge Ram 1500 and 2500 models, offering improved throttle response and a noticeable power increase without the need for complex installation.