All Products

• LS Swap EFI Specific Kit
  Designed for GM LS EFI fuel system conversions.
• Complete 6AN PTFE Hose Ends
  Straight, 45°, 90°, and 180° fittings included.
• Quick Connect Ready
  Adapters for GM 3/8" & 5/16" fuel rail connections.
• NPT Integration Support
  Easily connects pumps, filters, and regulators.
• Reusable CNC Aluminum Fittings
  Built for PTFE hose and high-pressure EFI systems.

• Note: Use an oil can and wrench together for an easier oil change

It can be applied to most cars, making sure there's enough room for Installation. You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option.

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

Compatibility: Exclusively for 2014-2018 Chevy Silverado 1500/GMC Sierra 1500 5.3L/6.2L.Please confirm fitment before purchase.
Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
Power & Torque Improvement- Unlock your engine’s potential with the EVIL ENERGY cold air intake system. Experience increased horsepower for quicker acceleration and more responsive power at higher speeds. Enhanced torque improves throttle response and delivers stronger hill-climbing performance.
High-Efficiency Air Filter-The multi-layer cotton air filter delivers over 98% filtration efficiency and is fully washable and reusable. Clean it every 100,000 miles to protect your engine from harmful contaminants and debris. A pre-filter blocks larger particles to extend the filter life in dusty environments.
High-Flow Cold Air Delivery-Engineered with a precision-bent&large-diameter aluminum tube for ultra-smooth airflow and increased horsepower—unlike plastic alternatives. Its polished finish adds a durable, custom look under the hood, while the fitted heat shield blocks engine heat to deliver cooler, denser air. Built to perform and last.
Hear the Engine Roar- Unleash your engine’s true sound with a deeper, more aggressive tone under acceleration, while maintaining a smooth and quiet ride at cruising speeds. Enjoy the perfect blend of performance and refinement.

• AN to NPT Conversion
  Connects AN hose ends to NPT threaded ports cleanly.
• 37° Flare Seal Design
  Provides a reliable, leak-resistant AN connection.
• High Pressure Rated
  Handles up to 1500 PSI for demanding systems.
• 6061-T6 CNC Aluminum
  Lightweight, corrosion-resistant, and durable.
• Multi-System Use
  Ideal for fuel and cooling system applications.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 92mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2010-2014 Chevy Camaro SS (LS3/L99), 2009-2013 Corvette (LS3/LS7), 2011-2014 Caprice, 2014 Chevy SS, 2009 Pontiac G8 (LS3/L76) (with TPS)

Vehicle Fitment

• fit for 1988-2000 GM GMT400 Platform: C/K Trucks, Tahoe/Yukon, Suburban & Escalade V8 Engines (5.7L-7.4L)

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug
• 8S-Type blades Fan

Sizes:

• AN4: 7/16"-20 UNF
• AN6: 9/16"-18 UNF
• AN8: 3/4"-16 UNF
• AN10: 7/8"-14 UNF
• AN12: 11/16"-12 UNF

Material: Constructed from durable 6061-T6 aluminum alloy, this AN to BSP fitting is black anodized for resistance to oil, rust, and corrosion.

Sealing Design: The AN side features a 37-degree angle seal for a secure connection.

Compatible Fluids: Suitable for engine oil, diesel, and fuel oil.

Application: Connects AN internal threads to BSP internal threads for use with fuel pumps, fuel injectors, and other fuel system components.

Efficient Operation System

• Electric choke for instant cold starts in all conditions
• 2-barrel simplified design reduces maintenance complexity
• fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• Single fuel inlet enables clean installation

Precision Calibration

• #63 jets optimize fuel efficiency for daily driving
• 30cc accelerator pump ensures crisp throttle response
• 8.5Hg power valve enhances low-RPM torque

Universal Compatibility

• Compact 3.25" height fits restricted engine bays
• 1.5" throttle bore balances airflow and efficiency
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

EVIL ENERGY Dual Air Intake Kit: Upgrade Your Dodge Ram's Performance

• Power Increase: Enhances horsepower and torque.
• Quality Materials: Black powder-coated aluminum alloy.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: All accessories included, simple tool installation.
• Efficient Filter: Washable, reusable cone air filter.

In summary, the EVIL ENERGY Dual Air Intake Kit is designed for 2003-2008 Dodge Ram 1500 and compatible models, offering a performance boost with improved throttle response and a stylish, sporty sound.

Performance-Calibrated Core

• 650 CFM airflow (supports 300–450 HP) + mechanical secondaries—instant throttle response, stable high-RPM operation.
• Factory-calibrated: #70/#74 jets + 1.30" balanced venturis + 6.5Hg power valve—precise air-fuel mixture.
• Dual fuel inlets—steady fuel delivery under heavy load (fuel inlet thread: 7/8-20in).

Durable & Customizable Build

• High-quality aluminum body with satin finish—corrosion-resistant, lightweight, sleek engine bay look.
• Electric choke (compatible with electric-to-manual conversion kit) for flexible control.
• 100% new machined components—matches premium brand quality (Holley/Edelbrock).

Hassle-Free Installation & Compatibility

• Bolt-on square-bore design—easy installation with no complex modifications.
• Universal fit: GM/Ford/Chrysler AT shift linkages + most performance intake manifolds.
• Compact 3.25-inch height—fits tight engine bays; fuel line center-to-center: 9.5in.

Boss-Level Stance! These 2" billet 6061-T6 spacers bolt straight onto 2019-23 Ram 1500 Classic & 2012-18 Ram 1500, pushing wheels 50 mm out for wider, meaner, vibration-free stance. T6 aluminum + 10.9-grade studs = light & bulletproof. CNC anodized black, 10-min install, instant head-turner on road or trail!

• Size: The thread sizes of NPT available are 3/4-14, 1/2-14, 3/8-18, 1/4-18, and 1/8-27.
• Parameter: Max Working Pressure: 1500PSI. Working Temperature Range: -40°F to 250°F.
• Material: Made of aluminum alloy 6061-T6, anodized surface.
• Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.
• Widely used in fuel systems to connect up to three lines or to add branches to one line.