All Products

• [Fitment]:Compatible with 2014-2018 Chevy Silverado 1500 5.3L & 6.2L,2015-2020 Chevy Tahoe 5.3L& 6.2L,2015-2020 Chevy Suburban 5.3L& 6.2L,2014-2018 GMC Sierra 1500 5.3L& 6.2L,2015-2020 GMC Yukon/Yukon XL 5.3L & 6.2L,2015-2019 Cadillac Escalade 6.2L.
• [Installation Location]:In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]:It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]:The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

Core Cooling Performance

• Stacked-plate aluminum core: Efficiently lowers oil temp (engine/transmission/differential) to prevent degradation.
• 10ROW/16ROW/19ROW Fits Different Needs.
• Safe & stable: 116 PSI test pressure, 232 PSI burst pressure – anti-leakage.

Durable Build

• Aluminum alloy cooler: Lightweight, corrosion-resistant.
• Nylon-braided CPE hoses: 500 PSI pressure, -40℉~257℉ temp tolerance – durable for extreme use.

Universal & Easy Installation

• Universal fit: Works with most cars/trucks (may need extra accessories).
• Multi-purpose: Cools engine/transmission/differential oil.
• DIY-friendly: Includes instructions, flexible hoses for easy mounting.

Value & Application

• Cost-effective: Extends powertrain life, reduces maintenance.
• Ideal for: Daily drivers, performance builds, racing, hot climates/heavy loads.

Manual Control System

• Manual (Cable driven, hand operated) choke for precise cold start control
• 2-barrel single-stage design reduces operational complexity
• Single fuel inlet enables clean installation
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage.

Balanced Calibration

• #73 main jets optimize fuel delivery for daily performance
• 5.0Hg power valve enhances low-RPM torque efficiency
• High-flow 50cc accelerator pump (0.028" nozzle) ensures immediate response

Proven Compatibility

• 1.688" throttle bore maximizes airflow volume
• Low-profile 3.25" height clears components
• Direct bolt-on fitment for most V8 applications
• Newly Manufactured, not factory refurbished
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

Upgrade your vehicle with the EVIL ENERGY EFI Fuel System Kit! This comprehensive kit includes a 10 Micron Filter with Bracket and a powerful 300LPH high flow fuel pump. It also comes with a 10-micron fuel filter and all necessary fittings for easy installation.

Compatibility: Exclusively for 2014-2018 Chevy Silverado 1500/GMC Sierra 1500 5.3L/6.2L.Please confirm fitment before purchase.
Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.
Power & Torque Improvement- Unlock your engine’s potential with the EVIL ENERGY cold air intake system. Experience increased horsepower for quicker acceleration and more responsive power at higher speeds. Enhanced torque improves throttle response and delivers stronger hill-climbing performance.
High-Efficiency Air Filter-The multi-layer cotton air filter delivers over 98% filtration efficiency and is fully washable and reusable. Clean it every 100,000 miles to protect your engine from harmful contaminants and debris. A pre-filter blocks larger particles to extend the filter life in dusty environments.
High-Flow Cold Air Delivery-Engineered with a precision-bent&large-diameter aluminum tube for ultra-smooth airflow and increased horsepower—unlike plastic alternatives. Its polished finish adds a durable, custom look under the hood, while the fitted heat shield blocks engine heat to deliver cooler, denser air. Built to perform and last.
Hear the Engine Roar- Unleash your engine’s true sound with a deeper, more aggressive tone under acceleration, while maintaining a smooth and quiet ride at cruising speeds. Enjoy the perfect blend of performance and refinement.

Essential Performance

• 500 CFM square-bore flow for efficient small-block power
• 1.0-inch venturi maximizes airflow velocity
• 1.25-inch throttle bore enables precise throttle control

User-Friendly Design

• Electric choke for instant cold starts
• Single-line fuel inlet simplifies installation
• Non-adjustable calibration for plug-and-play reliability

Compact Solution

• Ultra-low 3-inch height fits restricted engine bays
• Square-bore flange for universal intake compatibility
• Solid-state construction (no replaceable jets/rods)

• Compatibility: Mazda Miata MX-5 NA/NB (1989-2005).
• Adjustable: 2-4 inches height drop.
• Durable: High-strength steel springs.
• Twin-Tube: Smooth ride, reduced friction.
• Quality: Steel components, easy install.

1. Top performance boost: Precise air intake control for optimal fuel ratio, instant power, and stable idle
2. Fuel savings: Works with auto-start/stop & cruise control to cut costs
3. 200ms fast response: Quick acceleration/deceleration, sharper throttle
4. Optimized valve: Reduces low-RPM torque losses
5. 92mm bore: Major horsepower gains, meets strict OE standards
6. Broad fit: 2010-2014 Chevy Camaro SS (LS3/L99), 2009-2013 Corvette (LS3/LS7), 2011-2014 Caprice, 2014 Chevy SS, 2009 Pontiac G8 (LS3/L76) (with TPS)

A complete AN fitting solution for high-performance fuel and transmission setups.
This 6/8/10AN hose end fitting kit includes swivel fittings in multiple angles, AN6 male-to-male coupler, and hose separator clamps. Designed for CPE or nylon braided hose, it ensures a leak-free, professional-grade connection for your custom build.

Core Versatility

• Multi-purpose: Ideal for fuel supply/return, transmission oil coolers, coolant, vacuum, turbo coolers, or oil feed lines.
• Broad compatibility: Works with transmission fluid, oil, race gas, diesel, hydraulic fluid (excludes E85/E10 ethanol fuel).
• Size options: Available in 4AN/6AN/8AN/10AN to fit diverse vehicle setups.

Premium Durability

• Construction: CPE rubber inner + 304 stainless steel helix + nylon outer braid; aluminum alloy fittings.
• Resilient: Abrasion/corrosion-resistant, withstands harsh engine bay conditions for long-lasting use.

High-Performance Specs

• Pressure: 750PSI working (625PSI for 10AN); 2250PSI bursting (1875PSI for 10AN).
• Temperature range: -22°F to 248°F (-30°C to 120°C) – adapts to all climates.
• Size-specific dimensions: Tailored ID/OD/min bending radius for each AN size (see specs table for details).

Package Include

• 1 × 10FT Braided CPE Fuel Line (matching AN size)
• Universal fittings: 2×straight/2×45°/2×90° hose ends, 2×blanking plugs, 2×hose separator clamps
• Size-specific adapters: AN-to-AN and AN-to-NPT adapters tailored for 4AN/6AN/8AN/10AN

Application & Value

• Suitable for: Street vehicles, high-performance builds, racing, off-roading, and automotive repairs.
• Cost-effective: All-in-one 16-piece kit – no extra purchases needed.
• Note: Do Not fit E85, E10 Ethanol Fuel

Enhance your Toyota's performance with EVIL ENERGY 6X5.5 Hubcentric Wheel Spacers. Designed for precision and stability, these spacers come in four thickness options—1", 1.25", 1.5", and 2"—to suit your specific needs. Crafted from durable 6061-T6 aircraft-grade aluminum, they provide an ultimate upgrade for improved handling and aesthetics.

EVIL ENERGY Cold Air Intake Kit: Boost Your Duramax Performance

• Power Upgrade: Enhances horsepower and torque.
• Optimized Airflow: Outside filter for cooler, denser air.
• Sporty Sound: Deep, aggressive exhaust note.
• Effortless Install: All necessary accessories included.
• Washable Filter: High-quality, reusable for efficiency.

In summary, the EVIL ENERGY Cold Air Intake Kit is designed for 2004-2005 GMC Sierra/Chevy Silverado 6.6L Duramax LLY models, offering a simple yet effective way to improve your vehicle's performance and driving experience.