Intake System

Choose the Right Air Intake System for Your Build

An intake system is the complete airflow path that feeds filtered air to the engine, including the air filter, intake tube or airbox, sensors, throttle body and intake manifold. Evil Energy brings these air intake system components together so you can restore restricted factory airflow, select a vehicle specific cold air intake, or match larger components to a modified engine. Start with the restriction you need to solve because the largest tube, throttle body or manifold is not automatically the best match for every engine.

Use this comparison to choose the right performance intake part for your vehicle and build goals.

Intake component Best use Confirm before buying
Cold air intake kits Vehicle specific airflow routing, a more noticeable induction sound and a serviceable filter option Exact year, make, model, trim, engine, sensor layout, tube route, filter position, tuning requirement and emissions status
Engine air filters Routine maintenance or restoring airflow while retaining the factory airbox Filter dimensions, sealing edge, OE cross reference, dry or oiled media and replacement or cleaning instructions
Performance throttle bodies Modified engines where the original throttle opening is a verified restriction Bore and inlet dimensions, bolt pattern, cable or electronic control, TPS and IAC inclusion, adapter needs and calibration
Intake manifolds Engine swaps, carbureted builds and combinations designed for a specific RPM and airflow range Engine family, cylinder head ports, fuel system, throttle or carburetor flange, hood clearance and compatible hardware

Improve Airflow Without Creating Fitment or Drivability Problems

The best air intake kit is the one engineered around your exact vehicle, not simply the kit with the largest diameter. Depending on the product listing, selected Evil Energy vehicle specific cold air intake kits for North American trucks, SUVs, Jeeps and muscle cars may include an aluminum intake tube, steel heat shield, reusable oiled cotton filter and pre filter. Contents, filter media, maintenance intervals and emissions restrictions vary by SKU, so verify the individual product page before ordering.

A well matched cold air intake system can reduce unnecessary restriction, make throttle response feel more immediate and add a stronger induction sound under acceleration. Actual horsepower, torque and fuel economy results depend on the engine, factory intake, exhaust, calibration, weather and test method. Evil Energy does not treat one result as a universal promise. If the stock airbox already supplies enough air, a fresh filter may be the smarter first step. A larger throttle body or manifold is most useful when the rest of the engine combination can use the additional airflow.

Before purchasing a performance intake system, verify the exact year, make, model, trim, engine displacement and engine code. Also confirm MAF or MAP sensor type and orientation, throttle body inlet size, PCV and breather connections, hood and rotating component clearance, filter exposure to heat or water, included hardware, ECU calibration requirements and CARB status. Review the cold air intake fitment and installation guide before installation.

Match the Performance Intake to Your Vehicle and Driving Conditions

For a daily driver, prioritize exact fitment, sealed connections, stable sensor readings and easy filter service. For towing, dusty roads or off road use, consider heat exposure, pre filtration, water risk and a shorter inspection schedule. For racing or a heavily modified engine, treat the racing intake system, fuel delivery, ECU calibration and performance exhaust system as one combination instead of assuming a single larger part will create power.

After installing any air intake kit, check every coupler, clamp, sensor seal and breather connection. Confirm that the tube cannot contact the hood, fan, belts, radiator, wiring or sharp edges. If the engine develops a warning light, abnormal fuel trims or rough idle, inspect for an air leak, reversed MAF sensor, disconnected hose or calibration mismatch before driving further.

+ Read more
Sidebar

Categories

Featured Products

EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black - EVILENERGY[Straight,1PC]
EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black

Engineered for high-pressure, high-temperature fuel systems, the EVIL ENERGY PTFE Hose End Fitting delivers leak-proof performance for PTFE fuel lines in performance builds, LS swaps, boosted engines, and ethanol-based fuel setups. Made from 6061-T6 aluminum with a 360° swivel design, these AN fittings ensure a clean, secure, and easy-to-assemble connection—ideal for builders who demand durability and precision.

$8.99
$8.99
$0.00
Quick Add
Close
Quick Add
Close
[Black,Without Bracket] black inline evil energy fuel filter with directional arrow and multiple AN fuel line fittingsevil energy fuel filter kit with stainless steel inline fuel filter, AN fittings, and mounting hardware
EVIL ENERGY Inline Fuel Filter with 6AN 8AN 10AN Adapter and Bracket Universal 10/30/40/100 Micron - Black

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.

  • [Material] Aluminum alloy fuel filter can and stainless steel filter element.
  • [O-ring] The o-ring provides a tight seal for fittings and end caps.
  • [Function] Can be used for filtering gasoline, diesel, etc. Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle.
  • [Feature] Removable design, easy to clean or replace filter element at regular time.
  • [Installation Tips] We have debugged the installation direction of the fuel filters before delivery. Please check and ensure the closed end of the filter element docks with the spring. Let the liquid flow following the arrow from the spring end to the other end, and the fuel filter will serve longer.
$23.99
$23.99
$24.99
  • Black
  • Silver Black
  • Blue
  • Red
Quick Add
Close
Quick Add
Close
[20FT] EVIL ENERGY PTFE Fuel Line Kit, complete black hose & fittings set, 180-day return[16FT] EVIL ENERGY PTFE Fuel Line Kit, black braided hose, fittings, free shipping & return
EVIL ENERGY 4/6/8/10AN PTFE Fuel Line Kit | E85 Nylon Braided Hose | 16/20FT Black Black with Comprehensive Fittings

Three-Layer Construction: Our fuel lines are constructed with a triple-layer material for unparalleled performance and protection. The innermost layer is made of PTFE for maximum chemical resistance, a braided stainless steel layer for strength and durability, and an outer nylon layer for added abrasion resistance and protection.

Multiple Sizes: We offer our fuel lines in 4AN, 6AN, 8AN, and 10AN sizes, catering to the diverse needs of various fuel delivery systems.

Fitting Types: Our kit includes a variety of fittings at 0°, 90°, 45°, and 180° angles, ensuring versatility and flexibility during installation, allowing for custom routing in tight or complex spaces.

Precision Fit and Leak-Free Performance: The combination of the PTFE inner layer and the high-quality aluminum hose ends ensures a precision fit and leak-free connection, even under extreme pressure, providing a safe and reliable fuel system.

$73.09
$73.09
$70.99
Quick Add
Close
Quick Add
Close
[1 PC][2 PCS]
EVIL ENERGY AN Flare to AN ORB Male Fuel Rail Adapter Fitting
  • AN to ORB Conversion
    Converts AN flare fittings to ORB ports for fuel rails and aftermarket fuel components.
  • High Pressure Capability
    Rated up to 1500 PSI for reliable performance in fuel and oil systems.
  • Leak Free Sealing Design
    37 degree AN flare seal combined with ORB O ring ensures a secure, leak resistant connection.
  • CNC Machined Aluminum
    Made from 6061 T6 aluminum with black anodized finish for corrosion resistance.
  • Wide Size Availability
    Multiple AN sizes available to support custom fuel system layouts.
$8.99
$8.99
Quick Add
Close
Quick Add
Close
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • EVIL ENERGY LS Ignition Coil set for Chevy Silverado V8 engine performance upgradeVehicle compatibility chart for GM HEI ignition module UF271 Chevrolet GMC Hummer
    EVIL ENERGY Ignition Coil UF271 Replacement for GM L-Series Truck Engines High Performance Upgrade
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Product Type Ignition Coils OEM Replacement UF271 Spark Energy 111mJ Spark Duration 2.331 mS Maximum Voltage 50000V Primary Resistance 0.97 ohms Secondary Resistance 6.24k ohms Turns Ratio 86   VEHICLE COMPATIBILITY Cadillac Model Year Engine Escalade 2003-2006 6.0L V8 Chevrolet...
    $199.99
    $199.99
  • EVIL ENERGY Cold Air Intake Kit w/Filter For 08-17 Nissan 370Z / 08-13 Infiniti G37 3.7L V6 - EVILENERGYmysite Cold Air Intake Kit w/Filter For 08-17 Nissan 370Z / 08-13 Infiniti G37 3.7L V6｜EVIL ENERGY
    EVIL ENERGY Cold Air Intake Kit w/Filter For 08-17 Nissan 370Z / 08-13 Infiniti G37 3.7L V6

    EVIL ENERGY Cold Air Intake Kit: Optimize Performance for Nissan & Infiniti

    • Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
    • Efficient Design: Black powder-coated aluminum for optimal airflow.
    • Sporty Sound: Intense, deep exhaust note.
    • Easy Install: Includes all necessary hardware for simple setup.
    • Washable Filter: High-quality, reusable cone air filter.

    In summary, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2008-2017 Nissan 370Z or 2008-2013 Infiniti G37 3.7L V6, delivering improved throttle response and performance with a straightforward installation.

    $91.00
    $91.00
  • [Silver][Black]
    EVIL ENERGY Chevy Big Block Dual Plane Intake Manifold - Silver
    • Dual plane carburetor intake manifold for compatible Big Block Chevy builds.
    • Fits 1965-2000 BBC 396, 402, 427, and 454 V8 applications.
    • 2,500-4,500 RPM range for street torque, cruising, and heavy-duty use.
    • Cast aluminum body with silver finish and Part No. 3001 details.
    $159.99
    $159.99
    • Silver
    • Black
    • Polished Silver
  • [Silver][Black]
    EVIL ENERGY Small Block Chevy Dual Plane Air-Gap Intake Manifold - Black
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 2013 Product Type Gasoline Intake Manifold Manifold Type Dual Plane Air-Gap Intake Manifold Fuel System Compatibility Carburetor Intake Style Air-gap dual plane carburetor intake layout RPM Range 1500-5500 RPM Material Cast Aluminum Color Silver...
    $149.99
    $149.99
    • Silver
    • Black
    • Polished Silver
  • EVIL ENERGY Cold Air Intake Compatible for 2011-2020 Dodge Charger Challenger 5.7L, 2012-2020 Chrysler 300 5.7L, Includes Heat Shield & Pre-Filter, BlackEVIL ENERGY Cold Air Intake Compatible for 2011-2020 Dodge Charger Challenger 5.7L, 2012-2020 Chrysler 300 5.7L, Includes Heat Shield & Pre-Filter, Black
    EVIL ENERGY Cold Air Intake Compatible for 2011-2020 Dodge Charger Challenger 5.7L, 2012-2020 Chrysler 300 5.7L, Includes Heat Shield & Pre-Filter, Black

    Give your 5.7L HEMI a cleaner intake path with an EVIL ENERGY cold air intake built for Dodge Charger, Dodge Challenger and Chrysler 300 applications. Designed for sharper throttle response, a deeper V8 intake tone and reduced heat soak with an aluminum intake tube, steel heat shield, washable filter and pre-filter included.

    $159.99
    $159.99
    $169.99
  • evil energy ignition coil rail internal structure with high conductivity copper wire and magnetic core for jeep wrangler 4.0lvehicle compatibility chart for evil energy ignition coil 5.7L V8 hemi engine dodge ram and jeep
    EVIL ENERGY Ignition Coil UF296 Fit Jeep Cherokee Wrangler TJ High Performance Replacement Coil
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Product Type Ignition Coils OEM Replacement UF296 Spark Energy 73mJ Spark Duration 2.033 mS Maximum Voltage 48000V Primary Resistance 0.84 ohms Secondary Resistance 14k ohms Turns Ratio 77   VEHICLE COMPATIBILITY Jeep Model Year Engine Cherokee 2000 2.5L L4 Cherokee...
    $89.99
    $89.99
  • EVIL ENERGY Cold Air Intake Kit – Free Shipping Over $50, Includes Intake Tube, Filter & Heat ShieldEVIL ENERGY Cold Air Intake vs Stock – Heat Shield, Large Aluminum Tube, Optimized Airflow
    EVIL ENERGY Cold Air Intake Compatible for 2018-2024 Jeep Wrangler JL/Jeep Gladiator JT 3.6L, Increases Horsepower, Towing Performance & Acceleration, Includes Heat Shield & Pre-Filter, Black

    Compatibility: Exclusively for 2018-2024 Jeep Wrangler JL and Gladiator JT 3.6L engines.

    Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

    Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

    Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

    Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

    $139.99
    $139.99
  • EVIL ENERGY 10.5mm Spark Plug Ignition Wire Set Compatible with 2000-2009 Chevy GMC V8 Engines, 8pcs High-Temp Silicone Wire SetEVIL ENERGY 10.5mm Spark Plug Ignition Wire Set Compatible with 2000-2009 Chevy GMC V8 Engines, 8pcs High-Temp Silicone Wire Set
    EVIL ENERGY 10.5mm Spark Plug Ignition Wire Set Compatible with 2000-2009 Chevy GMC V8 Engines, 8pcs High-Temp Silicone Wire Set
    ---!@!start!@!---Specifications---!@!end!@!--- Product Details Specification Details Brand EVIL ENERGY Product Type Spark plug wire set / ignition wire set Vehicle Applications Fits GM Gen III/IV LS V8 2000-2009: 4.8L 5.3L 6.0L 6.2L 7.0L. Chevy Silverado Tahoe Suburban Avalanche Express Trailblazer Corvette SSR Impala; GMC Sierra...
    $55.99
    $55.99
  • [Silver][Black]
    EVIL ENERGY Chevy Big Block Crosswind Intake Manifold - Black
    • Crosswind carburetor intake manifold for compatible Big Block Chevy builds.
    • Fits 1965-2000 BBC 396, 402, 427, and 454 V8 applications.
    • 3,500-5,500 RPM range for performance street and street/strip use.
    • Cast aluminum body with silver finish and Part No. 3026 details.
    $159.99
    $159.99
    • Silver
    • Black
    • Polished Silver
  • EVIL ENERGY Cold Air Intake Compatible for 2010-2015 Chevrolet Camaro SS 6.2L V8, Includes Heat Shield & Pre-Filter, BlackEVIL ENERGY Cold Air Intake Compatible for 2010-2015 Chevrolet Camaro SS 6.2L V8, Includes Heat Shield & Pre-Filter, Black
    EVIL ENERGY Cold Air Intake Compatible for 2010-2015 Chevrolet Camaro SS 6.2L V8, Includes Heat Shield & Pre-Filter, Black
    ---!@!start!@!---Description---!@!end!@!--- Unlock the 6.2L LS3/L99's potential with a high-flow cold air intake engineered specifically for the 5th Gen Camaro SS. Bolt-on installation, steel heat shield, and washable synthetic filter included. Key Features Precision Vehicle Fitment: EVIL ENERGY cold air intake compatible for 2010-2015 Chevrolet...
    $179.99
    $179.99
    $169.99
  • [Silver][Black]
    EVIL ENERGY Ford 351W Hurricane Single Plane High Rise Intake Manifold - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 4033 Manifold Type 351W Hurricane Single Plane High Rise Carburetor Intake Manifold Fuel System Compatibility Carburetor Intake Style Original-style intake / modified elbow and high-rise single plane racing layout RPM Range 3500 - 7500+...
    $159.99
    $159.99
    • Silver
    • Black
    • Polished Silver
  • [Silver][Polished silver]
    EVIL ENERGY Ford Small Block Hurricane Single Plane High Rise Intake Manifold - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Part Number 4031 Manifold Type Hurricane Single Plane High Rise Carburetor Intake Manifold Fuel System Compatibility Carburetor Intake Style Original-style intake / modified elbow and high-rise single plane racing layout RPM Range 5500-7500+ RPM, depending on the full engine combination...
    $159.99
    $159.99
    • Silver
    • Polished silver
    • Black
  • [Silver][Black]
    EVIL ENERGY Ford Small Block Polished Dual Plane Air Gap Intake Manifold - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 4026 Product Name Ford Small Block Polished Dual Plane Air Gap Intake Manifold Manifold Type Polished Dual Plane Air Gap Intake Manifold Fuel System Compatibility Carburetor Intake Style Dual plane air gap carburetor intake...
    $159.99
    $159.99
    • Silver
    • Black
    • Polished Silver
  • EVIL ENERGY Cold Air Intake Kit For 1994-2002 5.9L Cummins L6 Dodge Ram 2500/3500 - EVILENERGYmysite Cold Air Intake Kit For 1994-2002 5.9L Cummins L6 Dodge Ram 2500/3500｜EVIL ENERGY
    EVIL ENERGY Cold Air Intake Kit For 1994-2002 5.9L Cummins L6 Dodge Ram 2500/3500

    EVIL ENERGY Cold Air Intake Kit: Optimize Your Dodge Ram's Performance

    • Power Increase: Enhances horsepower and torque.
    • Efficient Design: Outside filter for cooler, oxygen-rich air.
    • Sporty Sound: Intense, deep exhaust note.
    • Easy Installation: All accessories included, simple setup.
    • Premium Filter: Washable, reusable for long-lasting use.

    In summary, the EVIL ENERGY Cold Air Intake Kit is a top choice for upgrading 1994-2002 Dodge Ram 2500/3500 5.9L Cummins Diesels, delivering a noticeable boost in power and performance with an easy installation process.

    $69.99
    $69.99
  • 5.8L/351 V8 Performance Intake Manifold for Ford Windsor 351W | Typhoon Series | Evil Energy - EVILENERGY5.8L/351 V8 Performance Intake Manifold for Ford Windsor 351W | Typhoon Series | Evil Energy - EVILENERGY
    5.8L/351 V8 Performance Intake Manifold for Ford Windsor 351W | Typhoon Series | Evil Energy

    The Professional Products Typhoon Intake Manifold for Ford Small Block Windsor 351W engines (5.8L/351 in³) is designed for street performance, providing improved top-end power and maintaining strong low-end torque. Made from lightweight aluminum, this dual-plane intake manifold features advanced provisions like nitrous bosses, a rear water crossover, and a square bore carburetor flange. It's perfect for aggressive street cam setups and ideal for performance enthusiasts seeking optimal airflow and engine cooling.

    $188.99
    $188.99
    $249.99
  • [Polished silver][Black]
    EVIL ENERGY Mopar Small Block LA Crosswind Dual Plane Intake Manifold - Polished silver
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Part Number 5026 Manifold Type Crosswind Dual Plane Carburetor Intake Manifold Fuel System Compatibility Carburetor Intake Style Original-style intake / modified elbow and crosswind dual plane street performance layout RPM Range 3,000 - 5,800 RPM Material Cast Aluminum Color /...
    $159.99
    $159.99
    • Polished silver
    • Black
    • Silver
  • [Black][Polished Silver]
    EVIL ENERGY Chevy Big Block Hurricane Oval Port Intake Manifold - Black
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Part Number 3037 Product Name Chevy Big Block Hurricane Oval Port Carburetor Intake Manifold Application Focus Big Block Chevy intake manifold for compatible BBC 396, 402, 427, and 454 carburetor builds Intake Category Oval port intake manifold / carburetor intake...
    $169.99
    $169.99
    • Black
    • Polished Silver
  • [Black][Silver]
    EVIL ENERGY LS1 LS2 LS6 Single Plane Carburetor Intake Manifold - Silver
    • Single plane carburetor intake manifold for compatible GM LS cathedral port engines.
    • Fits LS1, LS2, LS6, and compatible Gen III / Gen IV LS cathedral port combinations.
    • 5000-7500+ RPM range for high-RPM LS carburetor builds.
    • Cast aluminum body with black finish and Part No. 300-132 details.
    $159.99
    $159.99
    • Black
    • Silver
    • Polished Silver
  • EVIL ENERGY Cold Air Intake Compatible for 2007-2009 Chevy Silverado Suburban Cheyenne Tahoe Avalanche, 2007-2008 GMC Yukon Sierra, Cadillac Escalade, Includes Heat Shield & Pre-Filter, BlackEVIL ENERGY Cold Air Intake Compatible for 2007-2009 Chevy Silverado Suburban Cheyenne Tahoe Avalanche, 2007-2008 GMC Yukon Sierra, Cadillac Escalade, Includes Heat Shield & Pre-Filter, Black
    EVIL ENERGY Cold Air Intake Compatible for 2007-2009 Chevy Silverado Suburban Cheyenne Tahoe Avalanche, 2007-2008 GMC Yukon Sierra, Cadillac Escalade, Includes Heat Shield & Pre-Filter, Black
    ---!@!start!@!---Description---!@!end!@!--- About this item Replace the restrictive factory airbox on your 2007-2009 GM truck and unlock noticeable horsepower and torque gains with this EVIL ENERGY cold air intake kit. Designed for direct bolt-on installation on 5.3L, 6.0L, and 6.2L V8 engines, the kit pairs...
    $149.99
    $149.99
    $169.99
  • EVIL ENERGY Cold Air Intake Kit For 2005-2010 Dodge Charger/Challenger/Magnum/300C Hemi 5.7L/6.1L V8 - EVILENERGYmysite Cold Air Intake Kit For 2005-2010 Dodge Charger/Challenger/Magnum/300C Hemi 5.7L/6.1L V8｜EVIL ENERGY
    EVIL ENERGY Cold Air Intake Kit For 2005-2010 Dodge Charger/Challenger/Magnum/300C Hemi 5.7L/6.1L V8

    EVIL ENERGY Cold Air Intake Kit: Power Boost for Your Dodge

    • Enhanced Performance: Increases horsepower and torque.
    • Efficient Design: Black powder-coated aluminum for optimal airflow.
    • Sporty Sound: Intense, deep exhaust note.
    • Easy Install: Includes all necessary mounting accessories.
    • Premium Filter: Washable, reusable for 95% filtration efficiency.

    In summary, the EVIL ENERGY Cold Air Intake Kit with Red Filter is perfect for upgrading your 2005-2010 Hemi 5.7L/6.1L V8 Diesel, offering improved throttle response and a sporty sound with an easy installation process.

    $94.61
    $94.61
    Out Of Stock
    Out Of Stock

FAQs about Intake System

How do I choose the right cold air intake kit for my car?

Choose a cold air intake kit by matching the exact year, make, model, trim, engine displacement and engine code. Then confirm the MAF or MAP sensor housing and orientation, throttle body inlet, PCV and breather ports, tube routing, filter location, mounting hardware, hood clearance, tune requirement and CARB status. Do not buy an air intake kit by tube diameter or appearance alone.

Some vehicle specific performance air intake kits are designed for the factory ECU calibration, while other intake designs or modified engine combinations require a tune. Follow the exact product instructions instead of assuming every kit is tune free. After installation, check for diagnostic codes, rough idle, abnormal fuel trims, air leaks, incorrect MAF orientation and disconnected breather hoses.

A properly matched cold air intake system can reduce unnecessary airflow restriction, make throttle response feel more immediate, create a stronger induction sound under acceleration and provide a serviceable filter option. Actual horsepower, torque and MPG changes vary by vehicle, weather, calibration and test method, so use product specific test data rather than universal performance claims.

Fix maintenance problems, vacuum leaks and diagnostic codes before upgrading. Choose an engine air filter when the factory airbox meets your airflow needs. Choose a vehicle specific cold air intake when you want different routing, a serviceable filter or more induction sound. Upgrade the throttle body or intake manifold only when it is a verified restriction and the complete engine combination can use the additional airflow.

A cold air intake is legal for emissions controlled street use in California only when a valid CARB Executive Order covers the exact part number, vehicle year and engine application, unless the part is otherwise exempt. Some Evil Energy product pages state that the product is not legal for sale or use in California or states that follow California emissions standards. Verify the product page and CARB EO database before ordering.

 .

RECENTLY VIEWED PRODUCTS