Intake System

Choose the Right Air Intake System for Your Build

An intake system is the complete airflow path that feeds filtered air to the engine, including the air filter, intake tube or airbox, sensors, throttle body and intake manifold. Evil Energy brings these air intake system components together so you can restore restricted factory airflow, select a vehicle specific cold air intake, or match larger components to a modified engine. Start with the restriction you need to solve because the largest tube, throttle body or manifold is not automatically the best match for every engine.

Use this comparison to choose the right performance intake part for your vehicle and build goals.

Intake component Best use Confirm before buying
Cold air intake kits Vehicle specific airflow routing, a more noticeable induction sound and a serviceable filter option Exact year, make, model, trim, engine, sensor layout, tube route, filter position, tuning requirement and emissions status
Engine air filters Routine maintenance or restoring airflow while retaining the factory airbox Filter dimensions, sealing edge, OE cross reference, dry or oiled media and replacement or cleaning instructions
Performance throttle bodies Modified engines where the original throttle opening is a verified restriction Bore and inlet dimensions, bolt pattern, cable or electronic control, TPS and IAC inclusion, adapter needs and calibration
Intake manifolds Engine swaps, carbureted builds and combinations designed for a specific RPM and airflow range Engine family, cylinder head ports, fuel system, throttle or carburetor flange, hood clearance and compatible hardware

Improve Airflow Without Creating Fitment or Drivability Problems

The best air intake kit is the one engineered around your exact vehicle, not simply the kit with the largest diameter. Depending on the product listing, selected Evil Energy vehicle specific cold air intake kits for North American trucks, SUVs, Jeeps and muscle cars may include an aluminum intake tube, steel heat shield, reusable oiled cotton filter and pre filter. Contents, filter media, maintenance intervals and emissions restrictions vary by SKU, so verify the individual product page before ordering.

A well matched cold air intake system can reduce unnecessary restriction, make throttle response feel more immediate and add a stronger induction sound under acceleration. Actual horsepower, torque and fuel economy results depend on the engine, factory intake, exhaust, calibration, weather and test method. Evil Energy does not treat one result as a universal promise. If the stock airbox already supplies enough air, a fresh filter may be the smarter first step. A larger throttle body or manifold is most useful when the rest of the engine combination can use the additional airflow.

Before purchasing a performance intake system, verify the exact year, make, model, trim, engine displacement and engine code. Also confirm MAF or MAP sensor type and orientation, throttle body inlet size, PCV and breather connections, hood and rotating component clearance, filter exposure to heat or water, included hardware, ECU calibration requirements and CARB status. Review the cold air intake fitment and installation guide before installation.

Match the Performance Intake to Your Vehicle and Driving Conditions

For a daily driver, prioritize exact fitment, sealed connections, stable sensor readings and easy filter service. For towing, dusty roads or off road use, consider heat exposure, pre filtration, water risk and a shorter inspection schedule. For racing or a heavily modified engine, treat the racing intake system, fuel delivery, ECU calibration and performance exhaust system as one combination instead of assuming a single larger part will create power.

After installing any air intake kit, check every coupler, clamp, sensor seal and breather connection. Confirm that the tube cannot contact the hood, fan, belts, radiator, wiring or sharp edges. If the engine develops a warning light, abnormal fuel trims or rough idle, inspect for an air leak, reversed MAF sensor, disconnected hose or calibration mismatch before driving further.

+ Read more
Sidebar

Categories

Featured Products

EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black - EVILENERGY[Straight,1PC]
EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black

Engineered for high-pressure, high-temperature fuel systems, the EVIL ENERGY PTFE Hose End Fitting delivers leak-proof performance for PTFE fuel lines in performance builds, LS swaps, boosted engines, and ethanol-based fuel setups. Made from 6061-T6 aluminum with a 360° swivel design, these AN fittings ensure a clean, secure, and easy-to-assemble connection—ideal for builders who demand durability and precision.

$8.99
$8.99
$0.00
Quick Add
Close
Quick Add
Close
[Black,Without Bracket] black inline evil energy fuel filter with directional arrow and multiple AN fuel line fittingsevil energy fuel filter kit with stainless steel inline fuel filter, AN fittings, and mounting hardware
EVIL ENERGY Inline Fuel Filter with 6AN 8AN 10AN Adapter and Bracket Universal 10/30/40/100 Micron - Black

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.

  • [Material] Aluminum alloy fuel filter can and stainless steel filter element.
  • [O-ring] The o-ring provides a tight seal for fittings and end caps.
  • [Function] Can be used for filtering gasoline, diesel, etc. Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle.
  • [Feature] Removable design, easy to clean or replace filter element at regular time.
  • [Installation Tips] We have debugged the installation direction of the fuel filters before delivery. Please check and ensure the closed end of the filter element docks with the spring. Let the liquid flow following the arrow from the spring end to the other end, and the fuel filter will serve longer.
$23.99
$23.99
$24.99
  • Black
  • Silver Black
  • Blue
  • Red
Quick Add
Close
Quick Add
Close
[20FT] EVIL ENERGY PTFE Fuel Line Kit, complete black hose & fittings set, 180-day return[16FT] EVIL ENERGY PTFE Fuel Line Kit, black braided hose, fittings, free shipping & return
EVIL ENERGY 4/6/8/10AN PTFE Fuel Line Kit | E85 Nylon Braided Hose | 16/20FT Black Black with Comprehensive Fittings

Three-Layer Construction: Our fuel lines are constructed with a triple-layer material for unparalleled performance and protection. The innermost layer is made of PTFE for maximum chemical resistance, a braided stainless steel layer for strength and durability, and an outer nylon layer for added abrasion resistance and protection.

Multiple Sizes: We offer our fuel lines in 4AN, 6AN, 8AN, and 10AN sizes, catering to the diverse needs of various fuel delivery systems.

Fitting Types: Our kit includes a variety of fittings at 0°, 90°, 45°, and 180° angles, ensuring versatility and flexibility during installation, allowing for custom routing in tight or complex spaces.

Precision Fit and Leak-Free Performance: The combination of the PTFE inner layer and the high-quality aluminum hose ends ensures a precision fit and leak-free connection, even under extreme pressure, providing a safe and reliable fuel system.

$73.09
$73.09
$70.99
Quick Add
Close
Quick Add
Close
[1 PC][2 PCS]
EVIL ENERGY AN Flare to AN ORB Male Fuel Rail Adapter Fitting
  • AN to ORB Conversion
    Converts AN flare fittings to ORB ports for fuel rails and aftermarket fuel components.
  • High Pressure Capability
    Rated up to 1500 PSI for reliable performance in fuel and oil systems.
  • Leak Free Sealing Design
    37 degree AN flare seal combined with ORB O ring ensures a secure, leak resistant connection.
  • CNC Machined Aluminum
    Made from 6061 T6 aluminum with black anodized finish for corrosion resistance.
  • Wide Size Availability
    Multiple AN sizes available to support custom fuel system layouts.
$8.99
$8.99
Quick Add
Close
Quick Add
Close
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • [Black][Silver]
    EVIL ENERGY Small Block Chevy Dual Plane Air-Gap Small Gap Intake Manifold - Silver
    • Application: For compatible 1957-86 262-400 cid Small Block Chevrolet engines.
    • Fuel System: Carburetor intake manifold.
    • Design: Dual plane air-gap layout with small gap open type plenum.
    • RPM Range: 4500-6500+ RPM.
    • Material: Cast aluminum.
    • Best Use: Street/track balanced SBC builds and carbureted Small Block Chevy upgrades.
    $149.99
    $149.99
    • Black
    • Silver
    • Polished Silver
  • EVIL ENERGY Cold Air Intake Kit For 2001-2004 LB7 6.6L Duramax Chevrolet/GMC Sierra 2500HD 3500HD - EVILENERGYmysite Cold Air Intake Kit For 2001-2004 LB7 6.6L Duramax Chevrolet/GMC Sierra 2500HD 3500HD｜EVIL ENERGY
    EVIL ENERGY Cold Air Intake Kit For 2001-2004 LB7 6.6L Duramax Chevrolet/GMC Sierra 2500HD 3500HD

    EVIL ENERGY Cold Air Intake Kit: Empower Your Duramax Diesel

    • Power Enhancement: Boosts horsepower and torque.
    • Optimized Airflow: Positioned for maximum oxygen intake.
    • Sporty Exhaust: Intense, deep sound for a thrilling drive.
    • Simple Install: All necessary accessories included.
    • Efficient Filter: Washable, reusable for optimal performance.

    In summary, the EVIL ENERGY Cold Air Intake Kit is designed to enhance the performance of your 2001-2004 LB7 6.6L Duramax Chevrolet/GMC Sierra 2500HD 3500HD, offering a straightforward upgrade for improved throttle response and engine efficiency.

    $180.00
    $180.00
  • EVIL ENERGY Air Intake Kit For 2005-2010 Charger Magnum HEMI 5.7L 6.1L V8 - EVILENERGYmysite Air Intake Kit For 2005-2010 Charger Magnum HEMI 5.7L 6.1L V8 |EVIL ENERGY
    EVIL ENERGY Air Intake Kit For 2005-2010 Charger Magnum HEMI 5.7L 6.1L V8

    EVIL ENERGY Cold Air Intake Kit: Power Upgrade for Your Dodge

    • Performance Gain: 7-10% increase in horsepower, 6-8% in torque.
    • Cool Air Flow: Outside filter for optimal air intake.
    • Sporty Sound: Deep, aggressive exhaust note.
    • Easy Install: All accessories included, no extra parts needed.
    • Washable Filter: High-quality, reusable for efficient filtration.

    To sum up, the EVIL ENERGY Cold Air Intake Kit is designed to enhance your 2005-2010 Dodge Magnum, Charger, Challenger, or 300C SRT8's performance with a simple installation and a noticeable boost in power.

    $91.00
    $91.00
  • [Silver][Silver]
    EVIL ENERGY Chevy Small Block Dual Plane Intake Manifold - Silver
    • Dual plane carburetor intake manifold for compatible Small Block Chevy engines.
    • Fits 1957-86 262-400 cid SBC applications and selected 1987-91 L98 non-EGR setups.
    • 1500-5500 RPM range for street driving, cruising, and low-to-mid RPM response.
    • Cast aluminum body with polished silver finish and Part No. 2001 details.
    $139.99
    $139.99
    • Silver
    • Polished Silver
    • Black
    Out Of Stock
    Out Of Stock
  • [Silver]EVIL ENERGY 351W single plane intake manifold part 4023 in polished silver aluminum, featuring free shipping and one-year warranty badge.[Black]
    EVIL ENERGY Dual Plane Ford 351W Intake Manifold Carburetor for Small Block Windsor (SBF) - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 4023 Manifold Type Typhoon Dual Plane(351W) RPM Range 1500–6500 RPM Material Premium Cast Aluminum Alloy Color Silver/Black/Polished Silver Compatible Engine Ford Small Block SBF Windsor 351W 5.8L V8 Engine Fuel System Compatibility Carburetor Dimensions...
    $159.99
    $159.99
    • Silver
    • Black
    • Polished Silver
  • EVIL ENERGY 10.5mm Spark Plug Wire Set Compatible with 2000-2021 Chevy Silverado Tahoe Suburban Avalanche GMC Sierra Yukon Cadillac Escalade 4.8L 5.3L 6.0L 6.2L V8EVIL ENERGY 10.5mm Spark Plug Wire Set Compatible with 2000-2021 Chevy Silverado Tahoe Suburban Avalanche GMC Sierra Yukon Cadillac Escalade 4.8L 5.3L 6.0L 6.2L V8
    EVIL ENERGY 10.5mm Spark Plug Wire Set Compatible with 2000-2021 Chevy Silverado Tahoe Suburban Avalanche GMC Sierra Yukon Cadillac Escalade 4.8L 5.3L 6.0L 6.2L V8
    ---!@!start!@!---Specifications---!@!end!@!--- Product Details Specification Details Brand EVIL ENERGY Product Type Spark plug wire set / ignition wire set Vehicle Applications Fits most GM trucks and SUVs with V6 or V8 engines: Chevrolet Silverado 1500 (1999 to 2020), Silverado 2500 and 2500 HD (2000 to...
    $52.99
    $52.99
  • [Silver][Polished Silver]
    EVIL ENERGY Small Block Chevy Vortec Dual Plane Intake Manifold - Silver

    The EVIL ENERGY Small Block Chevy Vortec Dual Plane Intake Manifold is a carburetor-ready cast aluminum intake for compatible 262-400 cid Chevy V8 engines using 1996 and later Vortec L31 cast iron cylinder heads. With a street-focused 2,000-4,800 RPM range, it suits Vortec head upgrades, carb swaps, cruising builds, light truck refreshes, and budget-minded SBC performance projects.

    $159.99
    $159.99
    • Silver
    • Polished Silver
    • Black
  • EVIL ENERGY Cold Air Intake, 2015-2020 Ford F-150 5.0L, free shipping over $50EVIL ENERGY Cold Air Intake vehicle compatibility, 2015-2020 Ford F-150 5.0L
    EVIL ENERGY Cold Air Intake Compatible for 2015-2020 Ford F-150 5.0L, Increases Horsepower, Towing Performance & Acceleration, Includes Heat Shield & Pre-Filter, Black

    Compatibility: Exclusively for 2015-2020 Ford F-150 5.0L V8 (does not fit EcoBoost models).

    Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

    Performance: Increases horsepower and torque; improves acceleration, throttle response, towing, and hill-climbing.

    Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

    Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

    Sound: Aggressive tone under acceleration; quiet at cruising speeds.

    $149.99
    $149.99
    $169.99
  • EVIL ENERGY Cold Air Intake Kit for 2016-2023 Toyota Tacoma 3.5L – Free Shipping Over $50, Includes Black Tube, Red Filter & Heat ShieldEVIL ENERGY Cold Air Intake Fitment – 2016-2023 Toyota Tacoma 3.5L
    EVIL ENERGY Cold Air Intake Compatible for 2016-2023 Toyota Tacoma 3.5L, Increases Horsepower, Towing Performance & Acceleration, Includes Heat Shield & Pre-Filter, Black

    Compatibility: Exclusively for 2016-2023 Toyota Tacoma 3.5L engines.

    Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

    Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

    Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

    Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

    Sound: Aggressive tone under acceleration; quiet at cruising speeds.

    $139.99
    $139.99
  • EVIL ENERGY cold air intake kit featuring a black T-304 aluminum induction pipe and a high-flow blue cone filter for 6.7 Cummins diesel engines.Two high-quality washable and reusable blue cone air filters, a key component of the best cold air intake for 6.7 Cummins performance.
    EVIL ENERGY Cold Air Intake Kit For 2007.5-2012 Dodge 6.7 Cummins Diesel Ram 2500 3500 4500 5500

    EVIL ENERGY Cold Air Intake Kit: Upgrade Your Dodge Ram's Performance

    • Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
    • Premium Materials: Lightweight T-304 aluminum for maximum airflow.
    • Sporty Sound: Delivers a deep, intense exhaust note.
    • Easy Installation: Direct fit with all necessary accessories included.
    • Washable Filter: Upgraded, reusable cone air filter for optimal filtration.

    Experience improved throttle response and performance with EVIL ENERGY's Cold Air Intake Kit for 2007.5-2012 Dodge Ram 6.7 Cummins Diesel models.

    $117.77
    $117.77
    $0.00
  • [Silver][Black]
    EVIL ENERGY Dual Plane LS1 LS2 LS6 Carburetor Intake Manifold - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 300-130 Product Name Dual Plane Intake Manifold - GM LS1/LS2/LS6 (Aluminum) Manifold Type Dual Plane Carburetor Intake Manifold Fuel System Compatibility Carburetor Intake Style Original-style intake layout RPM Range 2000-4500 RPM Material Cast Aluminum...
    $169.99
    $169.99
    • Silver
    • Black
    • Polished Silver
  • EVIL-ENERGY-high-performance-ignition-coil-4-pack-cassette-UF669-with-branded-boxingVehicle-compatibility-chart-for-1.4L-L4-engine-UF669-misfire-fix-on-Chevy-Cruze-Sonic-Trax-Volt-Buick-Encore
    EVIL ENERGY Ignition Coil Replacement for UF669, Fit GM 1.4L Turbo High Performance Upgrade
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Product Type Ignition Coils OEM Replacement UF669 Spark Energy +25% vs OE Spark Duration 1.05 mS Maximum Voltage 50000V Primary Resistance 0.5 ohms Secondary Resistance 5.7k ohms Turns Ratio 79   VEHICLE COMPATIBILITY Buick Model Year Engine Encore 2013-2021 1.4L...
    $68.99
    $68.99
  • EVIL ENERGY Cold Air Intake Kit for 2007-2011 Jeep Wrangler JK 3.8L – Free Shipping Over $50, Includes Black Tube, Red Filter & Heat ShieldEVIL ENERGY Cold Air Intake Fitment – 2007-2011 Jeep Wrangler JK 3.8L
    EVIL ENERGY Cold Air Intake Compatible for 2007-2011 Jeep Wrangler JK 3.8L, Increases Horsepower, Towing Performance & Acceleration, Includes Heat Shield & Pre-Filter, Black

    Compatibility: Exclusively for 2007-2011 Jeep Wrangler JK 3.8L engines.

    Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

    Performance: Increases horsepower and torque; improves acceleration, throttle response, and hill-climbing capability.

    Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

    Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

    Sound: Aggressive tone under acceleration; quiet at cruising speeds.

    $139.99
    $139.99
  • [2IN][3IN]
    EVIL ENERGY 14" Round Air Cleaner Filter Element, Washable Red, 2IN / 3IN / 4IN / 5IN Height Options
    ---!@!start!@!---Specifications---!@!end!@!--- Product Details Specification Details Brand EVIL ENERGY Product Type Round air cleaner filter element Fit Type Universal fit for compatible 14-inch round air cleaner housings Outside Diameter 14.06 in Inside Diameter 12.24 in Height Options 1.97 in (2"), 2.99 in (3"), 3.94 in...
    $36.99
    $36.99
    Quick Add
    Close
    Quick Add
    Close
  • EVIL ENERGY 8mm Spark Plug Wire Set Compatible with GM LS3 LS4 LS7 Engines, Ceramic-Style Heat Protection Boot Reference, 8pcs Ignition Wire SetEVIL ENERGY 8mm Spark Plug Wire Set Compatible with GM LS3 LS4 LS7 Engines, Ceramic-Style Heat Protection Boot Reference, 8pcs Ignition Wire Set
    EVIL ENERGY 8mm Spark Plug Wire Set Compatible with GM LS3 LS4 LS7 Engines, Ceramic-Style Heat Protection Boot Reference, 8pcs Ignition Wire Set
    ---!@!start!@!---Specifications---!@!end!@!--- Product Details Specification Details Brand EVIL ENERGY Product Type Spark plug wire set / ignition wire set Vehicle Applications GM LS3, LS4 and LS7 engines; competitor references also list broader GM LS/LT engine applications Wire Outside Diameter 8 mm Spark Plug Wire Conductor...
    $55.99
    $55.99
  • EVIL ENERGY 90mm Electronic Throttle Body for Dodge Charger & Challenger Hellcat - Black Finish, Free Shipping + 180-Day ReturnEVIL ENERGY 90mm Electronic Throttle Body for Dodge Charger & Challenger Hellcat - Front View, Free Shipping + 180-Day Return
    EVIL ENERGY 90mm Electronic Throttle Body Fit 6.2L Supercharged HEMI V8 Hellcat- with TPS 4 Bolt - Black
    1. Boosts top-tier performance: Precisely controls air intake for optimal air-fuel ratio, delivers immediate power, and stabilizes idle for smooth rides
    2. Saves fuel: Works with auto-start/stop & cruise control to cut fuel consumption
    3. 200ms fast response: Quick acceleration/deceleration, sharpens throttle sensitivity
    4. Optimized valve: Reduces low-RPM torque losses for consistent power
    5. 90mm bore: Enhances horsepower, meets strict OE standards
    6. Wide fit: For 2015-2021 Dodge Charger/Challenger Hellcat 6.2L (with TPS)
    $269.99
    $269.99
    • Black
    Out Of Stock
    Out Of Stock
  • EVIL ENERGY Cold Air Intake Kit w/Filter For 2014-2018 Ram 2500 3500 6.4L V8 - EVILENERGYmysite Cold Air Intake Kit w/Filter For 2014-2018 Ram 2500 3500 6.4L V8｜EVIL ENERGY
    EVIL ENERGY Cold Air Intake Kit w/Filter For 2014-2018 Ram 2500 3500 6.4L V8

    EVIL ENERGY Cold Air Intake Kit: Boost Your Ram's Performance

    • Power Enhancement: Increases horsepower and torque.
    • Optimal Airflow: Positioned outside for cooler, denser air.
    • Rugged Design: Black powder-coated aluminum, durable and stylish.
    • Sporty Sound: Delivers a deep, aggressive exhaust note.
    • Easy Install: All hardware included, no additional parts required.

    Conclusively, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2014-2018 Ram 2500/3500 6.4L V8, offering improved throttle response and performance with a straightforward installation process.

    $129.00
    $129.00
  • [Silver][Black]
    EVIL ENERGY Ford Small Block Dual Plane Intake Manifold - Silver
    ---!@!start!@!---Specifications---!@!end!@!--- Intake Manifold Product Details Brand EVIL ENERGY Part Number 4001 Product Name Ford Small Block Dual Plane Carburetor Intake Manifold Application Focus Ford small block intake manifold for SBF Windsor 260, 289, 302, and 5.0L V8 carburetor builds Intake Category Dual plane intake...
    $169.99
    $169.99
    • Silver
    • Black
    • Polished silver
  • Evil Eenrgy Car air filter with red core and black housingEVIL ENERGY Cold Air Intake Compatible for 2012-2015 Honda Civic 1.8L, Increased Horsepower & Throttle Response, Includes Heat Shield & Pre-Filter, Black
    EVIL ENERGY Cold Air Intake Compatible for 2012-2015 Honda Civic 1.8L, Increased Horsepower & Throttle Response, Includes Heat Shield & Pre-Filter, Black
    ---!@!start!@!---Description---!@!end!@!--- Upgrade your 2012-2015 Honda Civic 1.8L with this EVIL ENERGY cold air intake kit featuring a large-diameter aluminum intake tube, multi-layer synthetic non-woven air filter with over 98% filtration efficiency, and a steel heat shield for cooler, denser air delivery. Key Features Direct...
    $159.99
    $159.99
    $169.99
  • EVIL-ENERGY-ignition-coil-UF648-6-pack-for-Dodge-Ram-1500-and-Jeep-Wrangler-PentastarCompatibility-chart-for-Jeep-Wrangler-ignition-coil-GMC-Sierra-and-ignition-coil-Dodge-Ram-1500
    EVIL ENERGY Ignition Coil UF648 Compatible with Chrysler Dodge Jeep 3.6L V6 High Performance Upgrade
    ---!@!start!@!---Specifications---!@!end!@!--- Brand EVIL ENERGY Product Type Ignition Coils OEM Replacement UF648 Spark Energy +20% vs OE Spark Duration 1.6 mS Maximum Voltage 51000V Primary Resistance 0.58 ohms Secondary Resistance 8.7k ohms Turns Ratio 102   VEHICLE COMPATIBILITY Chrysler Model Year Engine 200 2011-2016 3.6L...
    $115.99
    $115.99

FAQs about Intake System

How do I choose the right cold air intake kit for my car?

Choose a cold air intake kit by matching the exact year, make, model, trim, engine displacement and engine code. Then confirm the MAF or MAP sensor housing and orientation, throttle body inlet, PCV and breather ports, tube routing, filter location, mounting hardware, hood clearance, tune requirement and CARB status. Do not buy an air intake kit by tube diameter or appearance alone.

Some vehicle specific performance air intake kits are designed for the factory ECU calibration, while other intake designs or modified engine combinations require a tune. Follow the exact product instructions instead of assuming every kit is tune free. After installation, check for diagnostic codes, rough idle, abnormal fuel trims, air leaks, incorrect MAF orientation and disconnected breather hoses.

A properly matched cold air intake system can reduce unnecessary airflow restriction, make throttle response feel more immediate, create a stronger induction sound under acceleration and provide a serviceable filter option. Actual horsepower, torque and MPG changes vary by vehicle, weather, calibration and test method, so use product specific test data rather than universal performance claims.

Fix maintenance problems, vacuum leaks and diagnostic codes before upgrading. Choose an engine air filter when the factory airbox meets your airflow needs. Choose a vehicle specific cold air intake when you want different routing, a serviceable filter or more induction sound. Upgrade the throttle body or intake manifold only when it is a verified restriction and the complete engine combination can use the additional airflow.

A cold air intake is legal for emissions controlled street use in California only when a valid CARB Executive Order covers the exact part number, vehicle year and engine application, unless the part is otherwise exempt. Some Evil Energy product pages state that the product is not legal for sale or use in California or states that follow California emissions standards. Verify the product page and CARB EO database before ordering.

 .

RECENTLY VIEWED PRODUCTS