Google ads

• Size: M10x1.0 (20mm, 24mm) and M10x1.25 (20mm, 24mm) stainless steel single banjo bolts with 2 copper washers. M12x1.0 (31mm), M12x1.25 (31mm), and M12x1.5 (31mm) stainless steel single banjo bolts with 2 copper washers.
• Material: Made of stainless steel body.
• Medium:Compatible with fuel,oil,brake fluids,unleaded petrol,methanol&water.
• Application:Connect the master cylinder, wheel cylinder, caliper, and other brake clutch components to the hose
• Installation:Direct install and replace,conveninet to use.

Premium Stainless Steel Construction: Crafted from high-grade stainless steel and coated with a durable black powder finish, this tip offers excellent resistance to corrosion, chipping, and fading. The rugged black coating maintains its deep, aggressive look even under harsh driving conditions.
Angled Cut with Rolled Edge Design: The precision angled-cut outlet enhances your vehicle’s sporty appearance, while the smooth rolled edge eliminates sharp surfaces for added safety during installation and maintenance.
Built-In Drainage Protection: A discreet drainage hole at the bottom helps prevent water accumulation inside the tip, reducing the risk of rust and extending product lifespan.
Simple Bolt-On Installation: Equipped with secure clamping hardware for a quick, hassle-free installation. Just slide it onto the tailpipe, align properly, and tighten with a wrench — no welding required.

• Secure Fuel Line Connection
  Designed for fuel pump inlet and fluid transfer lines.
• High-Pressure Rated
  Supports up to 1500 PSI for demanding systems.
• Precision NPT Threads
  Tapered threads ensure tight, leak-resistant sealing.
• Durable Aluminum Construction
  CNC-machined 6061-T6 aluminum with black anodized finish.
• Easy Installation
  Compatible with standard PTFE tape and hose clamps.

• Precision-machined tee fitting with AN8 or AN10 male thread and female swivel on the run.
• Made of 6061-T6 aluminum with black anodized coating for durability and corrosion resistance.
• Rated for 1500 PSI working pressure, 37° AN flare seal ensures leak-free performance.
• Supports -40°F to 250°F temperature range, suitable for high-temp fuel and oil systems.
• Ideal for EFI, carburetor, or fluid systems in performance vehicles and LS swaps.

• Real-Time Tune Control – Instantly switch between 5 Positions: Economy, Tow, Performance, and Race.
• Premium EVIL ENERGY Build – CNC-machined aluminum knob with knurled grip and high-temp wiring.
• Perfect Compatibility – Works seamlessly with EZ Lynk and EFI Live SOTF tuning systems.
• Easy Installation – OEM-style connectors, split-loom protection, and no wire cutting required.
• Tailored for Cummins – Designed exclusively for 2010–2020 Dodge Ram 6.7L Cummins Diesel.

Compatibility: Exclusively for 2018-2024 Jeep Wrangler JL and Gladiator JT 3.6L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Fitment

• Fit For 1999-2013 Silverado, Tahoe, GMC Sierra, Hummer H2 5.3L, 6.0L, 6.2L

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug

EVIL ENERGY Cold Air Intake Kit: Optimize Performance for Nissan & Infiniti

• Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
• Efficient Design: Black powder-coated aluminum for optimal airflow.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: Includes all necessary hardware for simple setup.
• Washable Filter: High-quality, reusable cone air filter.

In summary, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2008-2017 Nissan 370Z or 2008-2013 Infiniti G37 3.7L V6, delivering improved throttle response and performance with a straightforward installation.

EVIL ENERGY Super 44 Series: Unleash Deep, Aggressive Power!

• Powerful Sound: The Super 44 Series delivers a rich, aggressive tone with the deepest sound on the street.
• Durability: Built with aluminized steel and fully MIG welded for maximum strength and corrosion resistance.
• Versatile Fit: Multiple inlet and outlet sizes ensure compatibility with various exhaust setups.

Upgrade your exhaust with EVIL ENERGY’s Super 44 Series for unmatched performance and sound!

• [Fitment]: Compatible with 2015-2022 Charger Hellcat, 2015-2022 Challenger Hellcat(Including Redeye Models), 2018-2021 Trackhawk, 2018 Challenger Demon, 2021-2022 Durango Hellcat.
• [Installation Location]: In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]: It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]: The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

Fuel Cell Gas Tank‎: 10 gallon：Size: 16-inch (L) x 16-inch (W) x 9.05-inch (H), mounting tab measure diameter of 3.46-inch, inlet/outlet fitting: 10 AN

Fuel Lines: 20FT AN8 CPE black braided hoses: ID: 0.43-inch. OD: 0.64-inch

5FT 5/32-inch Vacuum Hose： ID:4m.OD:10mm

External Inline Fuel Pump Electric：300LPH

Fuel Pressure Regulator：20-120PSI

Inline Fuel Filter：10&100 Micron

Fittings: Swivel Hose End: Straight,45°,90°,180°

Additional Components: Y-Block, AN to ORB adapters, AN to AN Fittings, Bulkhead Fittings, and Hose clamps.

Application: Compatible with most modified and race-prepped vehicles.Ideal for LS swaps, turbocharged or supercharged engines, and high-flow fuel requirements.

• Premium 304 Stainless Steel – Rust and corrosion resistant, handles high heat and pressure.
• Complete Kit – Includes flanges, gaskets, bolts, and nuts for quick installation.
• CNC Precision Fit – Each flange hole ensures a tight, leak-free connection.
• Flange Edge Design – Easier welding for durable installation.
• Wide Compatibility – Ideal for exhaust, turbocharger, muffler, intercooler, and piping connections.