All Products

Capacity: 400ml

Weight: 148.5g

Material：Aluminum

Become a Member and Get This Gift for Free!

Join us today and claim your exclusive gift by clicking the link below:

www.ievilenergy.com/pages/loyalty-page

This aluminum intake manifold is designed for Ford FE big-block V8 engines (332ci-428ci) and is specifically engineered for use with stock heads and medium- or low-rise cylinder heads.
It is a perfect choice for those building a high-performance street engine on these classic Ford motors.

Compatible with Gen III LS1/LS2 Engines: Perfect for high-performance builds.

Designed for Forced Induction & Competition: Ensures optimal airflow and fuel distribution.

Durable & Lightweight: Made from aluminum and billet fuel rails for long-lasting performance.

Kit Includes:
Fuel Rail Kit: Comes with mounting bracket, crossover line, 3 fittings, 1 plug and several screws.
Intake Manifold: Comes with mounting hardware.

Enhance your Toyota Tacoma's performance and appearance with EVIL ENERGY 6X5.5 wheel spacers. Made from durable 6061-T6 aircraft-grade aluminum, these spacers provide stability and a wider stance for a better driving experience.

EVIL ENERGY Cold Air Intake Kit: Your Key to Enhanced Performance

• Power Boost: Increases horsepower and torque by 7-10% and 6-8% respectively.
• Efficient Design: Lightweight T-304 aluminum intake pipe for maximum airflow.
• Improved Response: Better throttle response at low and mid RPMs.
• Quality Filter: Upgraded washable and reusable cone air filter.
• Easy Install: All necessary mount accessories included, no extra parts needed.

Upgrade your Ford 7.3 Powerstroke Diesel with EVIL ENERGY for superior engine performance.

• Compatibility: Compatible with 2007-2023 Silverado 1500 2WD 4WD,2007-2023 Sierra 1500 2WD 4WD
• Benefits：Forged from 6061-T6 aluminum alloy material sturdy and durable，CNC automatic processing ensure high accuracy and stability, Provide accurate hole position for easy installation，12.9 Grade premium bolts excellent resistance to corrosion by anodized surface and heat treatment
• Function:The kit provides unparalleled ground clearance to conquer off-road obstacles and allow to use larger rims and tires，install it make your truck a cool look
• Installation：completed Installation within 1-2 hours, No cutting and drilling required and does not require strut/coil disassembly like other kits，With instructions to guide you to better installation
• Note：Raise the front of your truck by 3 inch and the rear of your car by 2 inch, Due to suspension geometry,the ratio between lift height and kit thickness is not 1:1

EVIL ENERGY 6AN PTFE fuel line kit includes 25FT AN6 braided PTFE hose, reusable aluminum AN fittings and built‑in 58 PSI 10‑micron fuel filter regulator. Built for custom LS swap and EFI return‑style fuel systems. PTFE inner tube resists ethanol permeation, compatible with E85, gasoline, diesel and biodiesel. Rated 1500 PSI working pressure, wide temperature range. Universal kit for street cars, trucks and off‑road builds, requires custom cutting and assembly, professional installation recommended.

Notice: The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.

EVIL ENERGY CPE nylon braided fuel line kit offers compact 10FT custom fluid plumbing for fuel, oil, coolant and vacuum builds.

Built with 3‑layer construction including CPE rubber inner tube, 304 stainless steel wire mesh reinforcement and black nylon braided outer cover. 6AN hose ID 0.31 inch, OD 0.56 inch, minimum bend radius 2.5 inches. Rated up to 750 PSI working pressure, 2250 PSI burst pressure, operating temperature from ‑22°F to 248°F. Fittings are constructed from aluminum alloy with 360‑degree swivel design.

Kit comes with 6 multi‑angle swivel aluminum hose ends (2 straight, 2 × 45‑degree, 2 × 90‑degree), 2 hose separator clamps, adjustable 3AN‑16AN wrench and a pair of protective gloves for full DIY assembly. Widely applied for transmission oil cooler, fuel supply and return, coolant, fuel gauge, vacuum, turbo cooler and oil feed lines.

Compatibility Note: Works with gasoline, diesel, E15, race gas, engine oil, coolant, transmission fluid and hydraulic fluid. NOT compatible with E85, E10, or methanol. Universal kit requires cutting, assembly and pressure testing. Professional installation recommended.

EVIL ENERGY CPE Nylon Braided Fuel Line Kit is a cost-effective, all-in-one solution for universal automotive custom fluid line builds. Adopting a durable 3-layer structure with CPE rubber inner tube, 304 stainless steel reinforcement and wear-resistant nylon outer braid, this hose delivers stable 750PSI working pressure and 2250PSI burst resistance, suitable for daily and mild performance vehicle modification.Available in 16FT and 20FT two optional lengths, the kit comes complete with 10 multi-angle 360° swivel aluminum fittings, adjustable AN wrench and protective gloves, supporting flexible routing for fuel, diesel, E15, engine oil, coolant, transmission and vacuum lines.
Note: Not compatible with E85, E10 and methanol fuel. Ideal for DIY builders and professional workshops seeking leak-proof, durable and easy-to-install fluid line replacement and upgrade kits.

Route fuel lines cleanly through firewalls, fuel cells, or panels with a full-flow 90° bulkhead that won't choke your pump's output. 6061-T6 aluminum, 37° AN flare seal, rated to 1500 PSI.

Connect a female 1/2-14 NPT port to a 5/8-inch ID hose while keeping the line routed close to the component. This EVIL ENERGY NPT to barb adapter features a fixed 90-degree design, a black-anodized aluminum body, and a male tapered NPT connection. Use a compatible thread sealant on the NPT side and a properly sized hose clamp on the barb side. Hose, clamp, and thread sealant are not included.

• Parameter: Maximum working pressure: 1,500 PSI. Working temperature range: -65℉ to 252℉ (-53℃ to 122℃)
• Material: Made of 6061-T6 aluminum alloy with a matching aluminum crimping sleeve, finished in hard-anodized black for corrosion resistance
• Feature: This hose end fitting features a crimp-on design, requiring no welding; simply insert the connector into the hose and crimp it in place. Installation must be performed using a crimping machine and dies
• Application: The crimp fitting works only with PTFE Stainless Braided Hoses and PTFE Nylon Braided Hoses, not suitable for CPE hoses and rubber hoses.

Upgrade your 1991-2001 Jeep Cherokee XJ 4.0L with a direct-fit cold air intake built for sharper throttle response, cleaner airflow and a deeper intake sound. Includes an aluminum intake tube, steel heat shield, washable synthetic filter and pre-filter for daily driving, dusty roads and trail use.

The EVIL ENERGY 15 Gallon Fuel Cell fits most custom builds with at least 19.88 × 17.91 × 10.03 inches of available space for secure mounting and plumbing. Its internal safety foam controls fuel slosh, supports steadier fuel delivery, and helps reduce fuel movement during impacts. Ideal for racing, drifting, and long-distance builds.