LS Engine Kit

2.5/3.0 Inch Electric Exhaust Valve: Boost Your Ride

• Fitment: Fits 2.5/3.0 inch exhaust pipes. Confirm space for installation.
• Features: Enhances performance with a deep, aggressive sound. Professional install advised.
• Specs: Stainless steel pipes, aluminum alloy valve. 3.5m wire, 12V, 100m remote range.
• Environment: Works 0℃-150℃. Avoid extreme weather.
• Support: Check remote battery and motor response if not working.

Upgrade your vehicle with our electric exhaust valve for a powerful sound and enhanced performance

• Note: Use an oil can and wrench together for an easier oil change

It can be applied to most cars, making sure there's enough room for Installation. You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option.

Fitment: GM LS1/LS2/LS6

Fuel Rail：
- Fits: For stock LS1/2/6 fuel injectors
- Material: Billet aluminum construction
- Includes: Mounting brackets, Crossover line, and Hardware 3/8" line diameter with -8 fittings

Intake Manifold:
- Finish: Satin
- Material: Aluminum
- Type: Single Plane
- Includes: Intake Manifold、Mounting Hardware

Bundle:
- Includes: Fuel Rail Kit + Intake Manifold

• [Fitment]:Compatible with 2014-2018 Chevy Silverado 1500 5.3L & 6.2L,2015-2020 Chevy Tahoe 5.3L& 6.2L,2015-2020 Chevy Suburban 5.3L& 6.2L,2014-2018 GMC Sierra 1500 5.3L& 6.2L,2015-2020 GMC Yukon/Yukon XL 5.3L & 6.2L,2015-2019 Cadillac Escalade 6.2L.
• [Installation Location]:In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]:It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]:The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

3-Port Flexibility

• 3-port design for flexible PCV system/custom setup routing; 10AN fittings (7/8-14 UNF thread) for secure connections

Balanced 750ML Capacity

• Captures oil particles effectively without occupying excess engine bay space; ideal for daily-driven vehicles

Efficient Ventilation & Maintenance

• Top-mounted breather filter enhances ventilation, eliminates intake return lines; bottom drain valve for quick draining
• Internal baffles reduce intake valve carbon buildup, keeping the engine clean

Durable & Compatible

• Precision-machined aluminum, TIG-welded; corrosion/heat-resistant (625PSI max working pressure)
• Universal fit (check engine bay space); includes necessary fittings, optional CPE fuel line kit

Premium Construction

• Full T-6061 aluminum build with TIG welding and black anodized finish—corrosion-resistant, heat- and pressure-tolerant for leak-free operation
• Dual-hole bracket design enables flexible, stable mounting on frames, panels, or subframes (suits diverse vehicle setups)

Convenient Maintenance

• Integrated bottom drain valve (screws into base) allows oil draining without disassembly—ideal for high-maintenance scenarios (race/off-road cars)
• Reusable design ensures long-term usability with minimal upkeep effort

Engine Protection

• Oil particle separation prevents carbon buildup; large-capacity (1L/2L/3L) design reduces frequent draining (suits high-boost/long high-RPM driving)
• Strategic breather filter captures impurities while maintaining airflow; regular capacity checks recommended to avoid overflow

Versatile Fit

• Installs as vent system (with breather filter) for pre-PCV cars or sealed can (without filter) between PCV hoses
• Includes AN10 fittings (0°/45°/90° swivels, etc.) and optional CPE fuel line kit—fits most cars (check dimensions for space)

Fitment

• Compatible with 82-02 Chevy S10/S-10 Blazer V8 Conversion
• Compatible with 1984-1990 Chevrolet Corvette

Construction

• Made of High Quality Full T-6061 Aluminum Construction; Bolt-On Aluminum Frame Fan Shroud

Feature

• High Performance 3-Row Racing Design Radiator with 12" Pull Fans; Stronger & Higher Capacity for Coolant than Stock Units; Direct Bolt-On OEM Fitment or Replacement

High Performance

• Improves Cooling by 35 - 45% Temp, Make Heat Dissipation More Efficient to Prevent Premature Engine Failure

This kit eliminates the inherent safety risks of the factory grid heater, preventing common issues like loose studs or nuts falling into the engine. Featuring a CNC billet delete plate and an innovative vertical heating coil design, it ensures safe, unrestricted cold starts while maintaining optimal airflow.

When compared to the stock manifold, this upgrade delivers:

• Significantly improved airflow thanks to wider, smoother internal passages.
• Zero airflow restriction by completely removing the OEM heater grid.
• No tuning required and fully emissions-compatible.
• Four 1/8" NPT ports for easy integration of sensors or boost accessories.
• Direct-fit installation with optimized fuel line clearance.

Fits 2007–2024 Ram 2500/3500 6.7L Cummins. Not compatible with Cab & Chassis models.

Vehicle Fitment

• fit for 1988-2000 GM GMT400 Platform: C/K Trucks, Tahoe/Yukon, Suburban & Escalade V8 Engines (5.7L-7.4L)

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug
• 8S-Type blades Fan

Fitment

• Fit For Ford Powerstroke Trucks 6.0L Powerstroke 2003-2007 Years

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug

Fitment:

• Fit Cadillac LS engines V8
• 2007-2008 Cadillac Escalade ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 Cadillac Escalade ESV ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 Cadillac Escalade EXT ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Chevrolet LS engines V8
• 2010-2015 Chevrolet Camaro ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2008-2013 Chevrolet Corvette ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2014-2017 Chevrolet SS ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2008-2008 Chevrolet Tahoe ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit GMC LS engines V8
• 2007-2008 GMC Sierra 1500 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 GMC Yukon ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• 2007-2008 GMC Yukon XL 1500 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Hummer LS engines V8
• 2008-2008 Hummer H2 ▪6.2L/376, EFI, Single Plain, Square Bore Flange
• Fit Pontiac LS engines V8
• 2009-2009 Pontiac G8 ▪6.2L/376, EFI, Single Plain, Square Bore Flange

• [Fitment]:Compatible with 2019-2022 Chevy Silverado 1500 5.3L & 6.2L,2019-2022 GMC Sierra 1500 5.3L & 6.2L,2021-2022 Chevy Tahoe,2021-2022 Chevy Suburban,2021-2022 GMC Yukon/Yukon XL.
• [Installation Location]:In most cases you only need air oil separator on the PCV side of the engine.
• [Note]:It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]:The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions

Bundle Contents: 10AN Baffled Oil Catch Can (750ML) + Universal Coolant Overflow Tank (1L/2L)

Material: Both products made of corrosion-resistant aluminum

Fit: Universal design, suitable for most vehicles (check installation space)

Key Benefits: Prevents oil buildup (catch can); maintains coolant levels (overflow tank); enhances engine performance & reliability

Maintenance: Oil catch can has drain valve for easy cleaning; coolant tank features leak-resistant design