• [Universal]It can be applied to most cars, making sure there's enough room for Installation.
• [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
• [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil.
• [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.
• Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

Kit Components: Braided nylon fuel hose + aluminum alloy swivel fittings

Hose Specs: 4/6/8/10/12AN sizes; 10/12/16/20FT lengths; Black/Black&Red colors

Hose Structure: 3-layer (CPE inner + 304 stainless steel mesh + nylon braid)

Fitting Quantity & Types:
- 6PCS: 2×Straight + 2×45° + 2×90° swivel ends;
- 10PCS: 4×Straight + 2×45° + 2×90° + 2×80° swivel ends;
- 12PCS: 4×Straight + 2×45° + 2×90° + 2×180° swivel ends + 2×(AN-AN or AN-NPT) fittings
Pressure Ratings: Max working pressure 500-750PSI; bursting pressure 1500-2250PSI

Applications: Suitable for transmission fluid, oil, race gas, fuel, diesel, hydraulic fluid, vacuum

Warranty: 6 months

• Size: M14*1.5 male-to-barb fitting thread; compatible with 3/8" ID pipe; 1L storage volume.
• Fitment: Universal coolant reservoir tank, suitable for most vehicles (measure installation space before purchase).
• Note: Features tight-closed cap, fully TIG-welded construction, and O-ring gasket on threads for leak prevention; Teflon tape is recommended during installation to enhance airtightness.
• Function: When radiator coolant pressure exceeds cap setting, coolant flows into the tank via overflow tube; bottom port for radiator overflow, top port for tank overflow.
• Warranty: 1-year warranty provided by EVIL ENERGY.

• EVIL ENERGY intank fuel pump fit for 12V DC EFI system only.
• Test flow：255LPH (43PSI), 190LPH (80PSI), Operating Pressure: 15-90 PSI, final fuel pressure set by regulator.
• Applicable fuel: gasoline, E85 and ethanol gasoline with less ethanol content than E85. (high impurity gasoline will directly affect the pump life)
• Note: The diameter of 255LPH high-flow intank electric fuel pump may be different from the original model, but it will not affect the use. Hoses, filters or other equipment may need to be replaced. Professional installation is highly recommended.

Perfect for a hassle-free installation!

Includes:

• External Fuel Pump Kit: 300 LPH
• 6AN 20FT Fuel hose*2
• 100-Micron Pre-Filter
• 30-Micron Post Filter
• Installation Hardware

EVIL ENERGY’s 45° AN Hose End Fitting delivers precision routing and secure sealing for fuel, oil, or transmission line builds. Designed from lightweight yet strong 6061-T6 aluminum and anodized in black for durability, this 45° fitting combines a compact bend angle with full 360° swivel. Available from 4AN to 20AN, it’s compatible with stainless and nylon braided hoses, and rated for up to 1500 PSI—ideal for LS swaps, EFI conversions, and space-constrained engine bays.

• Universal AN Fitment: Available in 4AN, 6AN, 8AN, 10AN, and 12AN sizes with precise UNF thread for secure connections.
• High-Performance Design: 90° swivel coupler ensures smooth fuel line routing in tight engine bays.
• Durable Construction: CNC-machined from 6061-T6 aluminum with a corrosion-resistant black anodized finish.
• Reliable Sealing: 37° flare angle guarantees leak-free operation under extreme pressure.
• Track & Street Proven: Rated up to 1500 PSI and -65℉ to 252℉, suitable for fuel, oil, coolant, and more.

• Instant Backflow Prevention – One-way stainless-spring design keeps fuel pressure stable and stops reverse flow.
• Wide Fluid Compatibility – Works with gasoline, diesel, oil, air, water, and low-pressure carburetor systems.
• Built for Harsh Conditions – 6061-T6 aluminum, anodized surface, and -22℉ to 266℉ temperature tolerance.
• Fast & Secure Installation – Barb connection fits snugly on standard fuel hoses for leak-free setup.
• Multiple Sizes Available – From 5/32 inch to 9/16 inch OD, ideal for custom builds and fuel system upgrades.

EVIL ENERGY’s AN Hose End Fittings are built for performance and flexibility. Machined from high-strength 6061-T6 aluminum, these swivel fittings support 360° rotation for quick and clean installations. Available in straight, 45°, 90°, and 180° configurations, they’re ideal for fuel, oil, transmission, and coolant lines in street, drag, or LS swap builds. Designed to withstand 1500PSI and compatible with both stainless braided and nylon braided hoses.

• Important Notice: Equipped with an air filter element only (no internal mesh filter); recommend using with a wrench for easier oil changes; check instruction manual before installation.
• Core Specs: Brand: EVIL ENERGY; Capacity: 750ML; Material: Aluminum; Colors: Black, Silver; Fit Type: Universal (fits most vehicles).
• Dimensions & Fittings: 10AN fittings (thread: 7/8-14 UNF); Bottom pressure relief valve (thread: 3/8 NPT).
• Key Functions: Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation; minimizes oil blow-by and carbon buildup; maintains long-term engine performance.
• User-Friendly Design: Bottom drain valve for easy cleaning/reuse; includes all hardware and instructions for hassle-free installation.
• Warranty & Support: 1-year warranty; 90-day hassle-free return policy; contact support@ievilenergy.com for assistance.

Please measure the size of the accessory before purchasing.

• 10 micron: Width is 32mm/1.25 inch, length is 74.5mm/2.93 inch.
• 100 micron: Width is 32mm/1.25 inch, length is 75mm/2.95 inch.

Note: The 100-micron filter element is only compatible with the all-black filter (SKU: EVKT01314BB-AMZ1).

• Universal Fit: Suitable for most cars (ensure enough installation space before purchase).
• Size: Length: 7.48inch; Bottom diameter: 2.95inch; Cap diameter: 1.96inch; Volume: 800ml; Hose ID: 5/16inch.
• Material: Aluminum alloy coolant overflow tank; NBR fuel hose.
• Feature: 1/16" ventilation hole on top for heat dissipation; O-ring seal to prevent coolant leakage.
• Installation: Install vertically, keep away from heat sources; installation instructions included.

• Conductive PTFE Core – Built with a carbon-impregnated inner layer to safely discharge static buildup. Critical protection when running E85, methanol, or high-flow EFI systems.
• True 6/8/10AN Size – High-volume fuel flow for 800–1000+ horsepower applications.
• Extreme Pressure & Heat Resistance – Rated to 1250 PSI working pressure and up to 446°F; ideal for EFI, turbo, supercharged, or race fuel setups.
• Fully E85-Compatible – Resists ethanol corrosion, fuel permeation, and temperature damage over time.
• Durable Nylon Braided Outer Shell – Offers abrasion resistance and maintains flexibility while protecting the PTFE core.