Evil Energy Best Selling

Anti-Backfire & Tune-Holding Design

• Metering rod system replaces fragile power valves—100% immune to engine backfires.
• Swappable metering rods for quick tuning—no carburetor removal or fuel draining.
• Holds calibration long-term—stable idle, throttle response, and power output for miles.

Electric Choke & Secondary Control

• Electric choke for hassle-free cold starts—automatic adjustment for temperature, ideal for cold climates.
• Air Valve-Controlled Secondaries—adapts to vehicle weight/gearing, avoids bogging or sudden power surges.
• Single fuel inlet simplifies installation—easy to route fuel lines to the carburetor.

Durable & Drop-On Compatibility

• Two-piece aircraft-grade aluminum body—lightweight, warp-resistant, compatible with gasohol/E10/E15.
• Square-bore flange—direct fit for standard intake manifolds, direct replacement for Edelbrock 1406.
• Suitable for small-block V8s—not for boats, computer-controlled vehicles, or RPM/Torker II manifolds.

Factory Calibration for Instant Use

• #98 primary/#95 secondary jets optimize low-RPM torque and high-RPM power.
• 0.028" accelerator pump nozzle ensures crisp throttle response (no lag).
• Includes gaskets/seals—leak-free installation, no extra parts needed.

Street-Tuned Twin-Tube Design - 50% More Comfortable Than Mono-Tube Kits!

✔️Perfect Fit:Direct bolt-on for 06-14 VW/Audi FWD models (see full list below)
✔️2-4 Inch Drop:From mild lowering to aggressive stance -no wheel gap

✔️Twin-Tube Advantage:50% more comfortable than harsh mono-tube competitors
✔️German Engineering:60,000+ cycle tested springs with anti-corrosion coating

• Reinforced Steel Tank
  Heavy-duty steel air tank with anti-corrosion coating and precision welding for long-term pressure stability.
• Integrated 12V Compressor
  Compact 12V compressor paired with tank for reliable onboard air supply without external systems.
• Multiple NPT Ports Design
  Five or six 1 4 NPT ports allow flexible routing for air horns suspension tires and pneumatic tools.
• Complete Installation Kit
  Includes air tank compressor hose drain valve seal tape and mounting hardware for fast setup.
• Built for Daily Use
  150 PSI rated system designed for safe air storage and consistent performance in vehicles and DIY projects.

• Purpose-built Design 6AN braided fuel line kit designed for clean routing and secure connections in performance fuel and fluid systems
• High Pressure Rated Supports up to 750 PSI working pressure and 2250 PSI burst pressure for reliable operation under load
• Durable Construction CPE rubber inner core reinforced with stainless steel wire and nylon outer braid for abrasion and heat resistance
• Wide Fluid Compatibility Suitable for fuel, oil, diesel, race gas, coolant, transmission fluid, and hydraulic applications
• Complete Kit Included Comes with a 3FT 6AN braided hose and 2 hose finisher clamps for a clean and professional install

Compatibility: Exclusively for 2016-2023 Toyota Tacoma 3.5L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

Extreme Airflow Performance

• 850 CFM square-bore flow for max-RPM domination (5500-7500 RPM range)
• Mechanical secondaries for instant WOT power delivery
• Oversized 1.56" venturi + 1.75" throttle bores optimize high-RPM breathing

Race-Spec Calibration

• Aggressive #78 primary / #89 secondary jetting for forced-induction readiness
• 0.035" accelerator pump nozzle eliminates throttle lag
• 6.5Hg power valve prevents lean-out at peak load

Pro Installation Ready

• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• come with black anodized billet throttle base plates for superior durability and throttle shaft stability.

• [Fitment]: Compatible with 2018-2023 Mustang GT, 2019 Mustang Bullitt, 2021-2023 Mustang Mach I.
• [Installation Location]: In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]: It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]: The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

Optimized Street-Strip Performance

• 750 CFM square-bore flow with mechanical secondaries (instant power engagement)
• Dual fuel inlets ensure stable supply during hard acceleration
• Balanced 1.38" primary/secondary venturis for linear power delivery

Precision Calibration

• #74 primary jets (street efficiency) + #80 secondary jets (WOT performance)
• 6.5Hg power valve for controlled fuel enrichment
• 0.031" accelerator pump nozzle for crisp throttle response

Automatic Transmission Ready

• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.
• Electric choke enables instant cold starts in all conditions
• Low-profile 3.25" height clears stock hoods

Mildly Modified Vehicles

• 750 CFM square-bore flow for maximum high-RPM power
• Vacuum-operated secondaries for seamless throttle response
• Dual fuel inlets ensure consistent high-volume fuel delivery

Precision Engineering

• Optimized #72 primary / #75 secondary jet calibration
• Balanced 1.375" venturis for even airflow distribution
• 6.5Hg power valve for controlled fuel enrichment & blow-out protection

Bolt-On Dominance

• Electric choke for instant cold starts in all conditions
• 100% wet-flow tested by technicians to assure it arrives ready to run
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage, additional parts may be require
• Compact 3.25" height clears restrictive engine bays