Evil Energy Best Selling

EVIL ENERGY Cold Air Intake Kit: Upgrade Your Dodge Ram's Performance

• Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
• Premium Materials: Lightweight T-304 aluminum for maximum airflow.
• Sporty Sound: Delivers a deep, intense exhaust note.
• Easy Installation: Direct fit with all necessary accessories included.
• Washable Filter: Upgraded, reusable cone air filter for optimal filtration.

Experience improved throttle response and performance with EVIL ENERGY's Cold Air Intake Kit for 2007.5-2012 Dodge Ram 6.7 Cummins Diesel models.

Compatibility: Exclusively for 2007-2011 Jeep Wrangler JK 3.8L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, and hill-climbing capability.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

EVIL ENERGY Exhaust Manifold: Boost Your Jeep's Power!

Enhance your 1991-2002 Jeep Cherokee/Wrangler's performance with our stainless steel exhaust manifold. Designed for 2.5L engines, it increases horsepower and improves sound.Fitment:

• 1996-2002 Dodge Dakota
• 1991-2002 Jeep Cherokee/Wrangler (TJ) Wrangler (YJ) (Except 1997 Jeep TJ SE)

Street-Tuned Twin-Tube Design - 50% More Comfortable Than Mono-Tube Kits!

✔️Perfect Fit:Direct bolt-on for 06-14 VW/Audi FWD models (see full list below)
✔️2-4 Inch Drop:From mild lowering to aggressive stance -no wheel gap

✔️Twin-Tube Advantage:50% more comfortable than harsh mono-tube competitors
✔️German Engineering:60,000+ cycle tested springs with anti-corrosion coating

Fitment

• Fit For 2001-2005 Year Chevrolet Silverado/GMC Sierra 2500/3500 HD (6.6L Duramax LB7/LLY)

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug

EVIL ENERGY Cold Air Intake Kit: Boost Your Ram's Performance

• Power Enhancement: Increases horsepower and torque.
• Optimal Airflow: Positioned outside for cooler, denser air.
• Rugged Design: Black powder-coated aluminum, durable and stylish.
• Sporty Sound: Delivers a deep, aggressive exhaust note.
• Easy Install: All hardware included, no additional parts required.

Conclusively, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2014-2018 Ram 2500/3500 6.4L V8, offering improved throttle response and performance with a straightforward installation process.

Give your 5.7L HEMI a cleaner intake path with an EVIL ENERGY cold air intake built for Dodge Charger, Dodge Challenger and Chrysler 300 applications. Designed for sharper throttle response, a deeper V8 intake tone and reduced heat soak with an aluminum intake tube, steel heat shield, washable filter and pre-filter included.

EVIL ENERGY Cold Air Intake Kit: Optimize Performance for Nissan & Infiniti

• Enhanced Power: Boosts horsepower and torque by 7-10% and 6-8%.
• Efficient Design: Black powder-coated aluminum for optimal airflow.
• Sporty Sound: Intense, deep exhaust note.
• Easy Install: Includes all necessary hardware for simple setup.
• Washable Filter: High-quality, reusable cone air filter.

In summary, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2008-2017 Nissan 370Z or 2008-2013 Infiniti G37 3.7L V6, delivering improved throttle response and performance with a straightforward installation.

• Size: AN6 (9/16"-18 UNF) Male Flare to 1/4"-18 NPSM. Package Included: 2PCS.
• Material: Built with sturdy 6061-T6 aluminum alloy, the 6AN transmission cooler fitting is anodized to be oil, rust, and corrosion-resistant
• Features: The CNC-machined adapter features a hexagonal design, making it easy to install. Its male AN side is well-sealed by a 37-degree angle
• Compatibility: It can be well-compatible with fuel, oil, water, and other media
• Application: The transmission fitting is designed for front and rear transmission line ports prior to 2007. Fits TH350, TH400 , 4L60E, 700R4

Verify Fitment Before Ordering:

This adapter is designed for 1/4-18 NPSM transmission cooler ports and is not compatible with inverted flare or different thread designs. Confirm your transmission port style to prevent incorrect installation.

• Precision-machined tee fitting with AN8 or AN10 male thread and female swivel on the run.
• Made of 6061-T6 aluminum with black anodized coating for durability and corrosion resistance.
• Rated for 1500 PSI working pressure, 37° AN flare seal ensures leak-free performance.
• Supports -40°F to 250°F temperature range, suitable for high-temp fuel and oil systems.
• Ideal for EFI, carburetor, or fluid systems in performance vehicles and LS swaps.

• Premium 304 Stainless Steel – Rust and corrosion resistant, handles high heat and pressure.
• Complete Kit – Includes flanges, gaskets, bolts, and nuts for quick installation.
• CNC Precision Fit – Each flange hole ensures a tight, leak-free connection.
• Flange Edge Design – Easier welding for durable installation.
• Wide Compatibility – Ideal for exhaust, turbocharger, muffler, intercooler, and piping connections.

Evil Energy coilovers, compatible with Honda Accord VIII Sedan/Coupe (2008-2012) and Acura TSX Sedan/Sport Wagon (2009-2014), offer 2-4 inches of adjustable lowering for enhanced handling and stability. Featuring durable heat-treated steel springs with 60,000+ cycle life and a twin-tube design for comfort and performance, these coilovers ensure precise camber adjustments and a strong, reliable build with steel components throughout.