EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 Nylon Braided PTFE Fuel Hose Kit 20FT with Adjustion Wrench, E85 Compatible Line Hose 5/16" ID Black[6AN]
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench

EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench

$107.99
$107.99
$107.99
SKU: EVAHL0001024
Product Type: PTFE Fuel Line Kits

  • [Size]: PTFE 6an fuel hose ID: 5/16" (0.31 inch). OD: 0.45 inch. Length: 20 ft(6 m). Please measure before purchase! (Includes: as shown in the picture)
  • [Working Parameter]: PTFE Line Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 1,500 PSI. Bursting pressure: 4,500 PSI.
  • [Applicable Medium]: Our PTFE fuel hose kits are suitable for all automotive fuels, lubricants, and coolants.
  • [Suitable for Widely Usage]: The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.
  • [Notice]: The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.

EVIL ENERGY checkout payment icons and shopping service
EVILENERGY EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench

EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench

$107.99
$107.99

EVIL ENERGY 6AN PTFE Fuel Line Kit, AN6 PTFE Fuel Hose Kit 25FT, Nylon Braided E85 LS Swap Line Hose with Wrench

$107.99

Product Details

Specification Details
Brand EVIL ENERGY
Fuel Line Type 6AN PTFE (AN6) Nylon Braided Fuel Hose Kit
Hose Inner Diameter 5/16 inch (0.31 inch / 7.9 mm)
Hose Outer Diameter 0.45 inch (11.4 mm)
Length 25 FT (7.62 m)
Fitting Material Aluminum Alloy (with wrench)
Working Temperature Range -76°F to 446°F (-60°C to 230°C)
Maximum Working Pressure 1,500 PSI
Bursting Pressure 4,500 PSI
Applicable Medium All automotive fuels, lubricants, and coolants (including E85)
Construction 3-Layer Reinforced Construction: Chemical & heat-resistant PTFE inner core, high-strength 304 stainless steel braided middle layer, corrosion & abrasion-proof nylon braided outer cover.
Application High-temperature, high-pressure fuel systems; ideal for LS swap and E85 conversions

About this item

Run clean E85 and gasoline fuel lines on your LS swap with a 6AN PTFE hose kit: 25FT of nylon-braided AN6 line rated to 1,500 PSI, plus wrench fittings for a leak-free, high-temperature build.

Where is this 6AN PTFE fuel line kit applied?

Use this 6AN PTFE fuel hose kit for E85 and gasoline fuel systems, LS swap conversions, fuel cell feeds, and high-pressure performance routing where chemical resistance and a 1,500 PSI working pressure are required. The nylon braided cover adds abrasion protection in tight engine bays.

Why choose PTFE over rubber fuel hose?

PTFE (Teflon) inner core resists fuel permeation, handles E85 and ethanol blends without swelling, and sustains a wider temperature band (-76°F to 446°F) than standard rubber. The result is a longer-lasting, leak-resistant fuel line for forced-induction and high-heat engine compartments.

Package Contents

  • 1 x 25FT 6AN PTFE Fuel Hose (AN6, 5/16 inch ID, 3-layer reinforced structure
  • Full Set 6AN Aluminum Wrench Fittings (Premium upgraded aviation-grade alloy, leak
  • 1 x 3AN-16AN Universal Adjustable Wrench (Multi-size compatible, non-slip
  • 1 Pair Protective Safety Gloves (2pcs, anti-cut & scratch

Why Choose EVIL ENERGY 6AN / AN6 25FT?

  • PTFE Chemical Resistance: Handles E85, gasoline, lubricants, and coolants without swelling — built for modern ethanol-blend fuels.
  • Rated for Performance Builds: 1,500 PSI working / 4,500 PSI burst pressure and -76°F to 446°F range covers LS swaps and turbo engine bays.
  • Complete Kit: 25FT of nylon-braided AN6 hose plus wrench fittings and wrench — ready for a clean, leak-free fuel line install.
Moderate Estimated Time: 0.5-1 hour

Tools Required

  • AN wrench set
  • Bench vise
  • Hose cutter or fine-tooth hacksaw
  • Deburring tool
  • Marker
  • Assembly lubricant
  • Safety glasses
  • Fuel-resistant gloves

Pre-Installation Checklist

  • Confirm whether the supplied hose is CPE, PTFE, or antistatic PTFE and use the matching assembly method.
  • Plan the routing path away from exhaust heat, moving parts, sharp edges, and abrasion points.
  • Confirm the correct hose ends and AN fittings are available.
  • Wear safety glasses and fuel-resistant gloves and work away from ignition sources.

Installation Steps

  1. Measure the hose along the intended routing path and allow enough length for bends without kinks or tension.
  2. Wrap the cutting area with tape, make a square cut, then deburr and clean the hose end.
  3. For CPE hose, secure the socket in a vise, thread the hose into it until snug, leave a 1-1.5 mm gap, and mark the hose position.
  4. For PTFE hose, slide on the socket, flare back the outer braid, seat the ferrule fully on the PTFE liner with no gap, and push the assembly onto the nipple.
  5. Apply assembly lubricant to the fitting threads, hold the socket securely, and tighten the fitting body until fully seated.
  6. Clean and pressure-test the completed hose assembly before installing it.
  7. Install the hose according to the system flow diagram and secure it away from heat, sharp edges, and moving parts.

Post-Installation Verification

  • Verify all hose ends are fully seated and fittings are secure without overtightening.
  • Confirm no hose is kinked, twisted, under tension, or exposed to abrasion or excessive heat.
  • Pressure-test the assembly and inspect every connection for leaks before starting the engine.
  • Reinspect after the road test and after 50-100 km.

Troubleshooting

  • Fuel leak: turn the ignition OFF immediately and replace damaged hose or fittings before operation.
  • Restricted flow or low pressure: inspect for kinks, incorrect routing, debris, or an incomplete hose-end assembly.
  • Air entering the system or fluctuating pressure: check all hose ends and fittings for loose connections or leaks.

Maintenance

  • Inspect hose routing, abrasion protection, and fittings periodically.
  • Replace any hose that is damaged, leaking, kinked, or heat-affected before operating the vehicle.

Brand Summary

Policy Details
Cancellation Policy Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days.
Returns Policy Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days.
Non-Returnable Items Only regular-priced items are eligible for refunds; sale items are non-refundable.
Refund Processing If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com.

Return Reasons

  1. Quality Issues: Provide photos/videos; we cover return shipping.
  2. Wrong Item Ordered: Buyer covers return shipping; email within 30 days.
  3. Change of Mind: Buyer covers return shipping; email within 30 days.
  4. Shipping Damage: Inspect packages; do not sign for damaged items.
  5. Incorrect Item Shipped: Contact within 7 days.

Price Protection Policy

Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.

Disclaimer

EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.

If you need further information or assistance, feel free to ask!

Product Videos

×

No Amazon reviews available for this product.

RELATED PRODUCTS

RECENTLY VIEWED PRODUCTS