CPE Fuel Line Kits

Upgrade your vehicle’s fluid delivery system with Evil Energy CPE fuel line kits, built to solve common pain points including fuel‑induced hose corrosion, insufficient pressure tolerance, and premature failure under harsh engine‑bay conditions. Our nylon braided CPE fuel hose features a three‑layer build: oil‑resistant CPE inner liner, reinforced 304 stainless steel braid, and wear‑proof nylon outer braid, delivering dependable long‑term performance for street builds, racing projects, off‑road rigs, and LS swap plumbing. Every all‑in‑one kit ships with matched aluminum AN fittings so DIY mechanics and professional installers can complete clean routing without hunting for separate hardware.

Engineered for High‑Pressure & Harsh Under‑Hood Environments

These CPE braided fuel lines support working pressures up to 750 PSI with burst pressure reaching 2250 PSI, paired with a wide operating temperature window ranging from ‑22°F to 248°F. The controlled minimum bending radius prevents kinks during tight‑space installation. Compatible fluids cover race gas, diesel, motor oil, transmission fluid, hydraulic fluid and vacuum systems. Note these hoses are not compatible with E85 or E10 ethanol fuels; for ethanol‑ready setups visit our PTFE fuel line collection.

Pick Your Kit by AN Size, Length and Fitting Configurations

Evil Energy CPE fuel line kits cover AN4, AN6, AN8, AN10, AN12 sizes with flexible length options: 3FT,10FT,16FT,20FT,25FT,33FT. Choose swivel‑fitting assemblies, push‑lock style kits, or dual‑size combined sets for fuel supply‑return circuits, turbo oil feeds or transmission cooler plumbing.

All‑in‑one package configurations eliminate guesswork. Each kit includes pre‑selected swivel ends (straight, 45°,90°,180°), separator clamps and optional blanking plugs according to your selection. Whether you are rebuilding a classic car, finishing an engine swap or upgrading factory rubber hoses, our CPE fuel line kit brings robust, cost‑effective fluid plumbing to your project.

+ Read more
Sidebar

Categories

Featured Products

EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black - EVILENERGY[Straight,1PC]
EVIL ENERGY PTFE Hose End Fitting for PTFE Hose Only (3/4/6/8/10/12AN) - Black

Engineered for high-pressure, high-temperature fuel systems, the EVIL ENERGY PTFE Hose End Fitting delivers leak-proof performance for PTFE fuel lines in performance builds, LS swaps, boosted engines, and ethanol-based fuel setups. Made from 6061-T6 aluminum with a 360° swivel design, these AN fittings ensure a clean, secure, and easy-to-assemble connection—ideal for builders who demand durability and precision.

$8.99
$8.99
$0.00
Quick Add
Close
Quick Add
Close
[Black,Without Bracket] black inline evil energy fuel filter with directional arrow and multiple AN fuel line fittingsevil energy fuel filter kit with stainless steel inline fuel filter, AN fittings, and mounting hardware
EVIL ENERGY Inline Fuel Filter with 6AN 8AN 10AN Adapter and Bracket Universal 10/30/40/100 Micron - Black

[Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.

  • [Material] Aluminum alloy fuel filter can and stainless steel filter element.
  • [O-ring] The o-ring provides a tight seal for fittings and end caps.
  • [Function] Can be used for filtering gasoline, diesel, etc. Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle.
  • [Feature] Removable design, easy to clean or replace filter element at regular time.
  • [Installation Tips] We have debugged the installation direction of the fuel filters before delivery. Please check and ensure the closed end of the filter element docks with the spring. Let the liquid flow following the arrow from the spring end to the other end, and the fuel filter will serve longer.
$23.99
$23.99
$24.99
  • Black
  • Silver Black
  • Blue
  • Red
Quick Add
Close
Quick Add
Close
[20FT] EVIL ENERGY PTFE Fuel Line Kit, complete black hose & fittings set, 180-day return[16FT] EVIL ENERGY PTFE Fuel Line Kit, black braided hose, fittings, free shipping & return
EVIL ENERGY 4/6/8/10AN PTFE Fuel Line Kit | E85 Nylon Braided Hose | 16/20FT Black Black with Comprehensive Fittings

Three-Layer Construction: Our fuel lines are constructed with a triple-layer material for unparalleled performance and protection. The innermost layer is made of PTFE for maximum chemical resistance, a braided stainless steel layer for strength and durability, and an outer nylon layer for added abrasion resistance and protection.

Multiple Sizes: We offer our fuel lines in 4AN, 6AN, 8AN, and 10AN sizes, catering to the diverse needs of various fuel delivery systems.

Fitting Types: Our kit includes a variety of fittings at 0°, 90°, 45°, and 180° angles, ensuring versatility and flexibility during installation, allowing for custom routing in tight or complex spaces.

Precision Fit and Leak-Free Performance: The combination of the PTFE inner layer and the high-quality aluminum hose ends ensures a precision fit and leak-free connection, even under extreme pressure, providing a safe and reliable fuel system.

$73.09
$73.09
$70.99
Quick Add
Close
Quick Add
Close
[1 PC][2 PCS]
EVIL ENERGY AN Flare to AN ORB Male Fuel Rail Adapter Fitting
  • AN to ORB Conversion
    Converts AN flare fittings to ORB ports for fuel rails and aftermarket fuel components.
  • High Pressure Capability
    Rated up to 1500 PSI for reliable performance in fuel and oil systems.
  • Leak Free Sealing Design
    37 degree AN flare seal combined with ORB O ring ensures a secure, leak resistant connection.
  • CNC Machined Aluminum
    Made from 6061 T6 aluminum with black anodized finish for corrosion resistance.
  • Wide Size Availability
    Multiple AN sizes available to support custom fuel system layouts.
$8.99
$8.99
Quick Add
Close
Quick Add
Close
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Fuel Line Kit Intank Fuel Pump to Carburetor Kit Nylon Braided Fuel Hose | EVIL ENERGY - EVILENERGYCPE Rubber hose with reinforced structure featuring 304 Stainless Steel, Braided Nylon, and CPE Rubber&heat resistant
    Fuel Line Kit Intank Fuel Pump to Carburetor Kit Nylon Braided Fuel Hose | EVIL ENERGY
    PRODUCT DETAILS Brand EVIL ENERGY Application Universal Hose Material Nylon, Synthetic Rubber,Stainless Steel Fitting Material Aluminum Hose Size 6AN 5FT Working Pressure 500 psi temperature range  -40℉ to 257℉ Maximum Pressure 2000 Pound per Square Inch Min Bending Radius 63.5mm Kit contains AN6 CPE...
    $50.19
    $50.19
  • EVILENERGY EVIL ENERGY 25FT 6AN Fuel Line Kit with Adjustable Wrench, 6AN Hose Braided Fuel Line Hose With 6AN Fittings Kit CPEEVILENERGY EVIL ENERGY 25FT 6AN Fuel Line Kit with Adjustable Wrench, 6AN Hose Braided Fuel Line Hose With 6AN Fittings Kit CPE
    EVIL ENERGY 25FT 6AN Fuel Line Kit with Adjustable Wrench, 6AN Hose Braided Fuel Line Hose With 6AN Fittings Kit CPE

    EVIL ENERGY 6AN EFI CPE Fuel Line Kit delivers a complete 25FT custom fuel plumbing solution for EFI supply, return, cooling, and vacuum systems.

    Featuring a 3-layer reinforced construction (CPE rubber inner, 304 stainless steel braid, nylon outer cover), this AN6 hose supports up to 750 PSI working pressure for durable daily and performance builds.

    The full kit includes swivel straight/45° hose ends, EFI quick-connect fittings, NPT adapters, hose clamps, AN wrench, and gloves for one-stop DIY installation.

    Compatibility Note: Works with gasoline, diesel, E15, oil, coolant, and hydraulic fluid. NOT compatible with E85, E10, or methanol.

    $105.99
    $105.99
    $105.99
  • EVIL ENERGY 6/8/10AN Fuel Line Kit with Vise Jaw Pads & Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 20FT[8AN]
    EVIL ENERGY 6/8/10AN Fuel Line Kit with Vise Jaw Pads & Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 20FT
    • Material: The hose is made of a CPE rubber inner, with a layer of 304 steel wire and a nylon outer braid. Hose fittings are made of high-quality aluminum alloy. The 4" vise jaw pads are crafted from durable nylon.
    • Parameter: Maximum working pressure of this 6AN fuel line: 750 PSI; burst pressure: 2,250 PSI. Temperature range: -22°F to 248°F. Minimum bend radius: 2.5 inches. Hose ID: 0.31". Hose OD: 0.56".
    • Efficient Installation: Comes with an adjustable wrench and vise jaw pads. The wrench fits 3AN-16AN fittings, featuring a curved design and non-slip handle for a comfortable, secure grip. The nylon vise pads prevent scratches on fittings, while strong magnetic attachment ensures stable positioning and precise installation.
    • Compatibility: The fuel line kit is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, and fuel.
    • Application: The braided fuel line is widely used as a transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauge line, vacuum line, turbo cooler line, and oil feed line.
    $95.99
    $95.99
    $95.99
    Quick Add
    Close
    Quick Add
    Close
  • Carburetor Pre-Fitted Nylon Braided Fuel Line Kit | EVIL ENERGY - EVILENERGYCPE Rubber hose with reinforced structure featuring 304 Stainless Steel, Braided Nylon, and CPE Rubber&heat resistant
    Carburetor Pre-Fitted Nylon Braided Fuel Line Kit | EVIL ENERGY
    Specifications Brand EVIL ENERGY Hose Material CPE Synthetic Rubber, Nylon Braided Layer, Stainless Steel Outer Braid Fitting Material Aluminum Hose Size -6AN Fuel Hose, 5FT Length Working Pressure 500 PSI Temperature Range -40°F to 257°F Burst Pressure 2000 PSI Minimum Bend Radius 63.5mm Package...
    $40.19
    $40.19
  • EVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Stainless Steel Fuel Line Fitting Kit CPE 20FTEVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Stainless Steel Fuel Line Fitting Kit CPE 20FT[6AN]
    EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Stainless Steel Fuel Line Fitting Kit CPE 20FT
    • Parameter: Maximum working pressure of this 10AN steel braided hose: 625 PSI; burst pressure: 1,875 PSI. Temperature range: -22°F to 248°F. Minimum bend radius: 4 inches.
    • Material: The 10AN stainless steel fuel line is made of a CPE rubber inner layer and a braided 304 stainless steel outer layer. The hose fittings are made of tough aluminum alloy.
    • Package Includes: 10PCS 10AN swivel hose ends (4 straight, 2 x 45°, 2 x 90°, 2 x 180°), 2PCS 10AN hose separator clamps, one adjustable wrench, and 10AN CPE fuel line.
    • Compatibility: The 10AN fuel line kit is compatible with transmission fluid, race gas, vacuum, hydraulic fluid, diesel, and fuel.
    $86.99
    $86.99
    $86.99
    Quick Add
    Close
    Quick Add
    Close
  • EVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 10FEVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 10FT [8AN]
    EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 10FT

    EVIL ENERGY CPE nylon braided fuel line kit offers compact 10FT custom fluid plumbing for fuel, oil, coolant and vacuum builds.

    Built with 3‑layer construction including CPE rubber inner tube, 304 stainless steel wire mesh reinforcement and black nylon braided outer cover. 6AN hose ID 0.31 inch, OD 0.56 inch, minimum bend radius 2.5 inches. Rated up to 750 PSI working pressure, 2250 PSI burst pressure, operating temperature from ‑22°F to 248°F. Fittings are constructed from aluminum alloy with 360‑degree swivel design.

    Kit comes with 6 multi‑angle swivel aluminum hose ends (2 straight, 2 × 45‑degree, 2 × 90‑degree), 2 hose separator clamps, adjustable 3AN‑16AN wrench and a pair of protective gloves for full DIY assembly. Widely applied for transmission oil cooler, fuel supply and return, coolant, fuel gauge, vacuum, turbo cooler and oil feed lines.

    Compatibility Note: Works with gasoline, diesel, E15, race gas, engine oil, coolant, transmission fluid and hydraulic fluid. NOT compatible with E85, E10, or methanol. Universal kit requires cutting, assembly and pressure testing. Professional installation recommended.

    $59.99
    $59.99
    $59.99
    Quick Add
    Close
    Quick Add
    Close
  • EVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 16FT/20FTEVILENERGY EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 16FT/20FT[6AN 16FT]
    EVIL ENERGY 6/8/10AN Fuel Line Kit with Adjustable Wrench, 6/8/10AN Hose Braided Fuel Line Hose With Fitting Kit CPE 16FT/20FT

    EVIL ENERGY CPE Nylon Braided Fuel Line Kit is a cost-effective, all-in-one solution for universal automotive custom fluid line builds. Adopting a durable 3-layer structure with CPE rubber inner tube, 304 stainless steel reinforcement and wear-resistant nylon outer braid, this hose delivers stable 750PSI working pressure and 2250PSI burst resistance, suitable for daily and mild performance vehicle modification.Available in 16FT and 20FT two optional lengths, the kit comes complete with 10 multi-angle 360° swivel aluminum fittings, adjustable AN wrench and protective gloves, supporting flexible routing for fuel, diesel, E15, engine oil, coolant, transmission and vacuum lines.
    Note: Not compatible with E85, E10 and methanol fuel. Ideal for DIY builders and professional workshops seeking leak-proof, durable and easy-to-install fluid line replacement and upgrade kits.

    $75.99
    $75.99
    $75.99
    Quick Add
    Close
    Quick Add
    Close
  • EVIL ENERGY 16FT CPE 4/6/8/10AN Fuel Line 26 Pcs Fitting Kit - EVILENERGYEVIL ENERGY 16FT CPE 4/6/8/10AN Fuel Line 26 Pcs Fitting Kit - EVILENERGY
    EVIL ENERGY 16FT CPE 4/6/8/10AN Fuel Line 26 Pcs Fitting Kit

    Core Advantages

    • Multi-purpose: Fuel lines, coolers, turbo systems, etc.
    • Broad compatibility (excludes E85/E10); 4/6/8/10AN sizes.

    Build & Performance

    • Material: CPE inner + 304 stainless steel + nylon braid.
    • Pressure: 750PSI (625PSI for 10AN); Temp: -22°F to 248°F.

    Application

    • Suitable for street cars, high-performance builds, racing, off-roading.
    • Note: Do Not fit E85, E10 Ethanol Fuel
    $76.99
    $76.99
    $95.99
    Quick Add
    Close
    Quick Add
    Close

FAQs about CPE Fuel Line Kits

What is a CPE fuel line and how does the CPE inner liner improve performance?

A CPE fuel line is a multi‑layer braided automotive hose built with a chlorinated polyethylene CPE inner liner, 304 stainless steel reinforcement and nylon outer braid. The oil‑resistant CPE inner liner resists degradation from gasoline, diesel, race gas and common motor fluids, delivering good flexibility for complex engine‑bay routing. This construction makes Evil Energy CPE kits a practical upgrade over standard single‑layer rubber fuel hoses. For ethanol‑resistant alternative, review our PTFE fuel line offerings.

Service life of CPE braided fuel hose depends on operating temperature, fluid type, vibration exposure and regular visual inspection. When used with compatible non‑ethanol fuels under rated pressure and temperature, these hoses deliver long‑term reliable performance. Inspect for cracking, swelling or abrasion during routine vehicle service. CPE material will degrade rapidly if exposed to E85 or E10 ethanol blends.

Evil Energy CPE fuel line kits work with race gas, gasoline, diesel, transmission fluid, engine oil, hydraulic fluid and vacuum circuits. These hoses are NOT compatible with E85, E10 or other ethanol‑blended fuels. Ethanol will swell and damage the CPE inner liner and create risk of leaks. Projects running ethanol fuel should select our PTFE fuel line kits.

CPE fuel hose features flexible synthetic rubber inner material, easier bending and more budget‑friendly for non‑ethanol street, race and off‑road builds, yet cannot tolerate ethanol‑rich fuels. PTFE fuel lines provide superior chemical resistance including full E85 compatibility, while being comparatively stiffer and higher‑priced. You can compare both product families within our fuel lines collection to match your exact project requirements.

Match your AN size to your fuel pump, fuel rail, filter and fitting hardware specifications. Measure your actual routing distance in the engine bay to decide required hose length. Evil Energy CPE fuel line kits offer AN4‑AN12 with lengths ranging from 3FT up to 33FT. Our kits include matched aluminum swivel or push‑lock AN fittings to complete your plumbing set‑up. Always measure before ordering to avoid insufficient or excess hose length.

 .

RECENTLY VIEWED PRODUCTS