Premium Construction

• Full T-6061 aluminum build with TIG welding and black anodized finish—corrosion-resistant, heat- and pressure-tolerant for leak-free operation
• Dual-hole bracket design enables flexible, stable mounting on frames, panels, or subframes (suits diverse vehicle setups)

Convenient Maintenance

• Integrated bottom drain valve (screws into base) allows oil draining without disassembly—ideal for high-maintenance scenarios (race/off-road cars)
• Reusable design ensures long-term usability with minimal upkeep effort

Engine Protection

• Oil particle separation prevents carbon buildup; large-capacity (1L/2L/3L) design reduces frequent draining (suits high-boost/long high-RPM driving)
• Strategic breather filter captures impurities while maintaining airflow; regular capacity checks recommended to avoid overflow

Versatile Fit

• Installs as vent system (with breather filter) for pre-PCV cars or sealed can (without filter) between PCV hoses
• Includes AN10 fittings (0°/45°/90° swivels, etc.) and optional CPE fuel line kit—fits most cars (check dimensions for space)

Core Advantages

• 750ML catch can + 10FT AN10 CPE line; 6061-T6 aluminum + CPE/stainless steel/nylon construction.
• Oil separation protects engine; built-in drain valve for easy maintenance.
• Two options (weld-on/ORB fittings) for universal vehicle compatibility.

Key Specs

• Line: 13.5±1mm ID / 20±1mm OD / 625PSI / -30℃~120℃ / 101.6mm bend radius.
• Fittings: 7/8-14 UNF (AN10) / 0°/90° swivel / 1500PSI.
• Catch Can: 750ML / 3/8-18 NPT drain valve.

Application & Support

• Suitable for street cars, racing builds, off-road vehicles (most makes/models).
• 1-year warranty + 90-day free returns + fast shipping.

📦Kit Includes:

• 16/20FT PTFE Fuel Line*1
• Straight PTFE Fittings*4
• 45° PTFE Fittings*2
• 90° PTFE Fittings*2
• 180° PTFE Fittings*2
• 6AN To 1/4NTP Fittings*4
• 6AN To 4AN Fittings*2
• 4AN To 4AN Fittings*2
• Blanking Plug*2
• Hose separator clamp*4

Upgrade your vehicle with the EVIL EFI Fuel System Kit!
This comprehensive kit includes a 20-120PSI fuel pressure regulator and durable fuel lines made from CPE/PTFE. It also comes with all necessary fittings for easy installation.

• Withstands 300 PSI working pressure, 1200 PSI burst rating, and -40°F to 212°F wide temperature range
• Compatible with gasoline, diesel, biodiesel (B100/B20), E10–E85 ethanol blends, oil, and mineral spirits
• Constructed with nitrile inner tube, stainless steel braid reinforcement, and nitrile/PVC outer layer
• Replaces 30R7/30R9 hose for critical submerged fuel system use. The hose is designed for submersibles and meets and exceeds the SAE 30R10 rating.

EVIL ENERGY High-Performance Fuel System Kit

• Engineered for LS-based engines (1999-2014 Chevrolet 4.8L/5.3L/6.0L), this comprehensive kit delivers precision fuel management for street and track applications. Combining filtration, pressure regulation, and high-flow delivery, it ensures optimal engine performance while supporting gasoline, E85, diesel, and ethanol blends.

Built for performance and durability, the EVIL ENERGY Transmission Oil Cooler Hose ensures a secure, heat-resistant connection for your automatic transmission or engine oil system. Made from premium CPE material reinforced with fiber, it withstands up to 250 PSI working pressure and extreme temperatures up to 257°F. Perfect for transmission cooler lines, hydraulic systems, and custom fuel setups that demand reliability under pressure.

📦Package Includes:

• 1*12FT/16FT PTFE Fuel Line
• 2*AN8 Straight PTFE Fitting
• 2*AN6 45° PTFE Fitting
• 2*AN6 90° PTFE Fitting

Intelligent Drive System

• Electric choke ensures reliable cold starts in all conditions
• 2-barrel single-stage design reduces maintenance complexity
• Single fuel inlet for simplified installation

Optimized Fuel Calibration

• #74 main jets balance power and fuel efficiency
• 5.0Hg power valve enhances low-RPM torque and economy
• High-capacity 50cc accelerator pump with 0.028' nozzle for immediate response

Universal Fitment

• fuel metering system provides precise fuel control for great low end torque and awesome acceleration
• 100% wet-flow tested by evil energy technicians to assure it arrives ready to run!
• compatible with GM, Chrysler, Ford A/T kickdown linkage. Additional parts may be required.

• Converts AN6 or AN8 female thread to 5/16" or 3/8" SAE quick disconnect EFI fitting.
• Machined from 6061-T6 aluminum, black anodized for durability and corrosion resistance.
• 37° AN flare design ensures tight seal, no leaks up to 1500 PSI.
• Operating range: -40℉ to 250℉ – suitable for high-temp, high-pressure EFI systems.
• deal for LS swap fuel rails, return lines, sensor ports, and transmission coolers.

✔ STOP CARBURETOR FLOODING! Precision-adjustable 4.5-9PSI range prevents overflow
✔ COMPLETE INSTALL KIT Includes pressure gauge, mounting bracket & all fittings
✔ MULTI-FUEL READY Works with gasoline, E85, ethanol & alcohol fuels (6061-T6 aluminum body)
✔ UNIVERSAL FIT 3/8IN NPT to AN6 ports adapt to most carbureted systems

3-Port Flexibility

• 3-port design for flexible PCV system/custom setup routing; 10AN fittings (7/8-14 UNF thread) for secure connections

Balanced 750ML Capacity

• Captures oil particles effectively without occupying excess engine bay space; ideal for daily-driven vehicles

Efficient Ventilation & Maintenance

• Top-mounted breather filter enhances ventilation, eliminates intake return lines; bottom drain valve for quick draining
• Internal baffles reduce intake valve carbon buildup, keeping the engine clean

Durable & Compatible

• Precision-machined aluminum, TIG-welded; corrosion/heat-resistant (625PSI max working pressure)
• Universal fit (check engine bay space); includes necessary fittings, optional CPE fuel line kit

Featuring a 20-foot nylon braided fuel hose and 12 high-quality aluminum swivel fittings (including 45° and 90° angles), this kit is perfect for various automotive applications such as fuel supply lines, oil feed lines, coolant hoses, and more.

With compatibility for oil, fuel, hydraulic fluids, and other automotive liquids, this kit guarantees reliability, longevity, and maximum pressure resistance for extreme conditions.

• 60° High-Flow Y Split Design – Optimized 60-degree separator ensures smooth dual-line distribution with minimal restriction, ideal for return-style fuel systems and performance fluid routing.
• True 37° AN Flare Seal – Precision CNC-machined flare seat delivers secure metal-to-metal sealing to prevent leaks under pressure and vibration.
• Female Swivel for Easy Clocking – Swivel end allows flexible alignment during installation, reducing hose stress and eliminating cross-threading issues.
• 1500 PSI Pressure Rated – Built for high-performance fuel, oil, coolant, and air systems operating from -40℉ to 240℉.
• 6061-T6 Aluminum Construction – Lightweight, corrosion-resistant, black anodized finish for durability and a clean engine bay appearance.

Upgrade your fuel system with the EVIL ENERGY 45° Push Lock Hose Fitting. Designed for rubber fuel lines, this barb adapter delivers leak-free connections, high working pressure up to 1500 PSI, and easy installation. Built with durable 6061-T6 aluminum, it’s the perfect solution for automotive enthusiasts looking for reliable performance and professional-grade fittings.