All Products

EVIL ENERGY Super 10 Series: Unleash the Beast!

• Extreme Performance: Super 10 Series mufflers deliver the loudest, most aggressive sound for off-highway use.
• Durable Construction: Made from Aluminized steel, fully MIG welded for maximum durability.
• Offset Design: Offset inlet and outlet for a unique, powerful exhaust flow.

Upgrade your ride with EVIL ENERGY’s Super 10 Series for unmatched power and soun

Core Marine Performance

• 750 CFM 4-barrel design: Optimized airflow for marine engine demands
• Air valve-controlled secondary throttle: Smooth power transitions for vessel stability

Convenience & Tuning

• Electric choke: Automatic temperature adjustment for easy cold starts
• Pre-calibrated: 0.11-inch main jets, 0.107-inch secondary jets, 0.031-inch accelerator nozzle, and metering rod system for out-of-the-box use
• Adjustable metering rods (0.075x0.047 inch): Allow fine-tuning for specific marine setups

Build & Installation

• 100% new components (non-remanufactured): Avoids hidden wear risks; built for marine durability
• Single fuel inlet, 3.25-inch height, square bore flange: Simplifies installation

Compatibility: Exclusively for 2016-2023 Toyota Tacoma 3.5L engines.

Installation: 40-minute setup with basic tools; no cutting/drilling; includes step-by-step instructions.

Performance: Increases horsepower and torque; improves acceleration, throttle response, hill-climbing, and towing.

Air Filtration: 98% efficient washable cotton filter + pre-filter; reusable, easy to maintain.

Intake Design: Large aluminum tube (smooth bends, low restriction) + steel heat shield (blocks engine heat for cooler air).

Sound: Aggressive tone under acceleration; quiet at cruising speeds.

Mildly Modified Vehicles

• 750 CFM square-bore flow for maximum high-RPM power
• Vacuum-operated secondaries for seamless throttle response
• Dual fuel inlets ensure consistent high-volume fuel delivery

Precision Engineering

• Optimized #72 primary / #75 secondary jet calibration
• Balanced 1.375" venturis for even airflow distribution
• 6.5Hg power valve for controlled fuel enrichment & blow-out protection

Bolt-On Dominance

• Electric choke for instant cold starts in all conditions
• 100% wet-flow tested by technicians to assure it arrives ready to run
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage, additional parts may be require
• Compact 3.25" height clears restrictive engine bays

Next-Gen Annular Flow Technology

• Annular flow primary boosters (8 orifices) – improved fuel atomization, no flat spots during throttle transitions.
• 650 CFM airflow + adjustable air valve secondaries – smooth power delivery for small-block/big-block engines.
• 1.19-inch venturi – enhances air velocity for sharper throttle response.

Precision Calibration & Tuning Support

• Factory-calibrated: #101/#98 jets, 0.070x0.037 inch metering rods, 5" Hg step-up spring.
• Timed & full vacuum ports – supports ignition advance calibration for optimized performance.
• 100% wet-flow tested – ready to install and run out of the box.

Universal Compatibility & Durability

• Square-bore flange – fits dual-plane/single-plane intake manifolds (GM/Ford/Chrysler).
• Ford AOD transmission compatible (with appropriate bracket, sold separately).
• High-quality aluminum construction (non-remanufactured) – corrosion-resistant, lightweight.

Installation & Application Notes

• Single fuel inlet for simplified installation; requires carburetor stud kit (sold separately).
• Requires new fuel filter (between pump and carburetor) for warranty/performance.
• Restrictions: No marine use; gasoline only (no alcohol/E85); adapter may be needed for factory intakes.

Fitment

• Fit For Dodge Ram Trucks 1994-2002 Years

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug

Fitment

• For 1968-1972 Chevrolet/GMC C/K Series, Blazer, Jimmy & G/P Vans

📦Package：

• EVIL ENERGY Radiator
• EVIL ENERGY Radiator Cap
• NPT 1/4 Drain Plug
• 10 S-Type blades Fan

Evil Energy coilovers, compatible with Honda Accord VIII Sedan/Coupe (2008-2012) and Acura TSX Sedan/Sport Wagon (2009-2014), offer 2-4 inches of adjustable lowering for enhanced handling and stability. Featuring durable heat-treated steel springs with 60,000+ cycle life and a twin-tube design for comfort and performance, these coilovers ensure precise camber adjustments and a strong, reliable build with steel components throughout.

EVIL ENERGY Cold Air Intake Kit: Boost Your Ram's Performance

• Power Enhancement: Increases horsepower and torque.
• Optimal Airflow: Positioned outside for cooler, denser air.
• Rugged Design: Black powder-coated aluminum, durable and stylish.
• Sporty Sound: Delivers a deep, aggressive exhaust note.
• Easy Install: All hardware included, no additional parts required.

Conclusively, the EVIL ENERGY Cold Air Intake Kit is the perfect upgrade for your 2014-2018 Ram 2500/3500 6.4L V8, offering improved throttle response and performance with a straightforward installation process.

• [Fitment]: Compatible with 2018-2023 Mustang GT, 2019 Mustang Bullitt, 2021-2023 Mustang Mach I.
• [Installation Location]: In most cases you only need an air oil separator on the PCV side of the engine.
• [Note]: It is recommended to check whether the oil separator needs cleaning after driving 500 to 1000 miles.
• [Function]: The fine mesh aluminum filter captures fine oil vapor, helping to extend engine life and keep it running smoothly and cleanly.
• [Easy installation]:Equipped with the required hoses, custom brackets and fittings for direct replacement. Including installation instructions.

• Direct Fit for 4L80E Systems Designed specifically for transmission cooler line connections on GM 4L80E and compatible platforms
• Dual Length Design Includes short and long fittings for front and rear port installation flexibility
• Leak Free AN Seal 37 degree flare ensures secure sealing and prevents fluid leaks under pressure
• Durable Aluminum Build Made from 6061 T6 aluminum with anodized coating for corrosion resistance
• Wide Fluid Compatibility Suitable for transmission fluid oil fuel and coolant applications