Tag is not equal to Fuel System

• Difference Between AN Size and Thread Size

1. AN Size: Refers to the diameter of the fitting or hose. AN (Army Navy) sizes are standardized hose and pipe connection sizes, measured in 1/16 inch increments. For example, 4AN means the pipe's outer diameter is 4/16 inch (1/4 inch).
2. Thread Size: Refers to the diameter and pitch of the thread, usually in metric or imperial units. For example, M12x1.5 means the thread diameter is 12 mm, and the pitch is 1.5 mm.

• Check Specifications Carefully: Before purchasing, carefully check the specifications of your equipment and pipes to ensure you choose the correct AN Size and Thread Size.

EVIL ENERGY 90° AN Hose End Fitting is the go-to choice for clean, tight-angle hose routing in fuel, oil, and coolant systems. Made from 6061-T6 aluminum with a corrosion-resistant black anodized finish, it supports 1500 PSI and a full 360° swivel for quick alignment and easy installation. Compatible with both stainless and nylon braided hoses, available from 4AN to 20AN to fit various build demands.

📦Kit Includes:

• 33FT PTFE Fuel Line
• Straight Swivel Fittings*8
• 45° Swivel Fittings*4
• 90° Swivel Fittings*4
• 180° Swivel Fittings*4
• Hose separator clamp*4

[Features]: Newly upgraded adjustable AN wrench with interchangeable hex and flat nylon jackets, providing a secure grip while preventing fitting damage.

[Nylon Jackets]: The wrench comes with two interchangeable jackets—hex and flat, combining the functionality of a traditional AN wrench and a flat wrench in one tool.

[Material]: High-strength aluminum alloy wrench with a sandblasted finish for durability and corrosion resistance. Reinforced nylon jackets offer excellent heat and wear resistance.

 [Warranty]: EVIL ENERGY provides a 1-year warranty for this product.

• 60 Degree High Flow Y Split Design
  Splits a single AN line into dual outlets at a 60 degree angle for clean and efficient routing.
• True 37 Degree AN Flare Seal
  Precision machined flare surface ensures secure metal to metal sealing without leaks.
• 4000 PSI High Pressure Rated
  Built for demanding fuel oil coolant and gas systems in performance applications.
• CNC Machined 6061 T6 Aluminum
  Lightweight yet strong aluminum body with corrosion resistant black anodized finish.
• Ideal for Custom Fuel and EFI Builds
  Perfect for dual fuel feed lines return systems regulator routing and LS swap setups.

Upgrade your fuel system with the EVIL ENERGY Push Lock Hose Fitting. Designed for rubber fuel lines, these fittings deliver a secure, leak-free connection without complex tools. Built from lightweight 6061-T6 aluminum with a black anodized finish, they handle up to 1500 PSI and wide temperature ranges, making them ideal for street, race, and custom performance builds.

Note: Use an oil can and wrench together for an easier oil change

• Item Weight：4.49 pounds
• Package Dimensions：‎12.8 x 9.72 x 5.51 inches
• Choose the 10ft or 20ft fuel line kit that fits your needs best.

Upgrade your automotive fluid transfer system with the EVIL ENERGY AN Hose End Fitting Swivel. Designed for compatibility with CPE braided hoses, these fittings offer versatility and durability. Available in sizes 4/6/8/10/12/16/20 AN, these fittings are suitable for a wide range of applications.

This kit eliminates the inherent safety risks of the factory grid heater, preventing common issues like loose studs or nuts falling into the engine. Featuring a CNC billet delete plate and an innovative vertical heating coil design, it ensures safe, unrestricted cold starts while maintaining optimal airflow.

When compared to the stock manifold, this upgrade delivers:

• Significantly improved airflow thanks to wider, smoother internal passages.
• Zero airflow restriction by completely removing the OEM heater grid.
• No tuning required and fully emissions-compatible.
• Four 1/8" NPT ports for easy integration of sensors or boost accessories.
• Direct-fit installation with optimized fuel line clearance.

Save 15% today! Code: EVIM15

Fits 2007–2024 Ram 2500/3500 6.7L Cummins. Not compatible with Cab & Chassis models.

The EVIL ENERGY Female-to-Female AN Union Fitting is a compact and reliable solution for connecting two AN male hose ends. CNC-machined from 6061-T6 aluminum and anodized in black, this straight-through adapter supports 360° swivel, 1500 PSI working pressure, and a precise 37° flare seal. Ideal for EFI conversions, LS swaps, or any high-pressure fluid system where modular plumbing and clean routing are key.

• AN female to AN male flare adapter, compatible with 3AN/4AN/6AN/8AN/10AN/12AN applications.
• Made from high-strength 6061-T6 aluminum alloy with black anodized finish for durability.
• 37° flare sealing design ensures a reliable, leak-free connection.
• 360° swivel construction allows quick, hassle-free installation.
• Withstands up to 1500 PSI working pressure and -65℉ to 252℉ temperature range.

• Universal Sizes: Available in 4AN, 6AN, 8AN, 10AN, and 12AN to match common fuel line setups.
• Strong & Durable: Made from lightweight 6061-T6 aluminum alloy, anodized for corrosion resistance.
• High Performance: Withstands up to 1500 PSI and operates in -40℉ to 248℉, ensuring leak-free performance.
• Quick Installation: Push-lock design for rubber fuel hoses; secure with clamps for maximum sealing.
• Wide Application: Ideal for fuel systems, oil systems, and performance modifications.

EVIL ENERGY AN Flare Reducer & Expander Adapters provide the perfect solution for transitioning between AN line sizes during fuel system upgrades or engine swaps. Made from durable 6061-T6 aluminum and black anodized for corrosion resistance, these fittings support up to 1500 PSI and are designed with a precision 37° flare seal. Compatible with fuel, oil, and coolant systems—ideal for LS swaps, EFI builds, and custom plumbing setups.