Fittings

Engineered for high-pressure, high-temperature fuel systems, the EVIL ENERGY PTFE Hose End Fitting delivers leak-proof performance for PTFE fuel lines in performance builds, LS swaps, boosted engines, and ethanol-based fuel setups. Made from 6061-T6 aluminum with a 360° swivel design, these AN fittings ensure a clean, secure, and easy-to-assemble connection—ideal for builders who demand durability and precision.

Upgrade your performance plumbing setup with EVIL ENERGY AN to NPT adapters — engineered for high-pressure reliability and precision sealing. Made from 6061-T6 aluminum with a black anodized finish, these fittings ensure a secure, leak-free connection across fuel, oil, and cooling systems. Ideal for professional tuners and performance enthusiasts looking for a durable, corrosion-resistant fitting that performs under pressure.

• AN to ORB Conversion
  Converts AN flare fittings to ORB ports for fuel rails and aftermarket fuel components.
• High Pressure Capability
  Rated up to 1500 PSI for reliable performance in fuel and oil systems.
• Leak Free Sealing Design
  37 degree AN flare seal combined with ORB O ring ensures a secure, leak resistant connection.
• CNC Machined Aluminum
  Made from 6061 T6 aluminum with black anodized finish for corrosion resistance.
• Wide Size Availability
  Multiple AN sizes available to support custom fuel system layouts.

Upgrade your fuel system with confidence! EVIL ENERGY’s 6/8AN to SAE Quick-Disconnect Fittings provide a leak-proof, high-pressure connection for EFI LS swaps, engine fuel rails, transmission coolers, return lines, and fuel sensors. Constructed from durable 6061-T6 aluminum with precision sealing, these fittings simplify installation while ensuring maximum reliability under extreme temperatures and pressures. Perfect for professional tuners and DIY engine enthusiasts looking for a seamless fuel system upgrade.

EVIL ENERGY’s Straight AN Hose End Fitting is a high-performance connector built for serious automotive builds—from fuel and oil lines to coolant and transmission setups. CNC-machined from 6061-T6 aluminum and finished in sleek black anodizing, it supports up to 1500 PSI and features a full 360° swivel for flexible routing. Compatible with both stainless and nylon braided hoses, this fitting is available in 4AN to 20AN for everything from fuel rails to radiator lines.

• Compatible with PTFE hoses only, ideal for E85, fuel, oil, nitrous, and hydraulic systems.
• 90° swivel design allows secure routing in tight engine bays.
• Precision 37° flare seal prevents leaks without extra sealant.
• Made from lightweight 6061-T6 aluminum with corrosion-resistant black anodized finish.
• Rated up to 1500 PSI and -40°F to 248°F for high-performance durability.

• Purpose-Built for EFI & LS Swaps – Converts 6AN fuel lines to factory-style 5/16" or 3/8" EFI quick-disconnect fuel rails.
• Leak-Free 37° AN Seal – Precision flare sealing eliminates fuel seepage under high pressure.
• High-Pressure Ready – Rated up to 1500 PSI for modern EFI and performance fuel systems.
• OEM-Style Push-On Connection – Quick-disconnect female end saves install time and ensures secure engagement.
• Durable Aluminum Construction – CNC-machined 6061-T6 aluminum for corrosion resistance and long service life.

EVIL ENERGY 90° AN Hose End Fitting is the go-to choice for clean, tight-angle hose routing in fuel, oil, and coolant systems. Made from 6061-T6 aluminum with a corrosion-resistant black anodized finish, it supports 1500 PSI and a full 360° swivel for quick alignment and easy installation. Compatible with both stainless and nylon braided hoses, available from 4AN to 20AN to fit various build demands.

• Difference Between AN Size and Thread Size

1. AN Size: Refers to the diameter of the fitting or hose. AN (Army Navy) sizes are standardized hose and pipe connection sizes, measured in 1/16 inch increments. For example, 4AN means the pipe's outer diameter is 4/16 inch (1/4 inch).
2. Thread Size: Refers to the diameter and pitch of the thread, usually in metric or imperial units. For example, M12x1.5 means the thread diameter is 12 mm, and the pitch is 1.5 mm.

• Check Specifications Carefully: Before purchasing, carefully check the specifications of your equipment and pipes to ensure you choose the correct AN Size and Thread Size.

• 60 Degree High Flow Y Split Design
  Splits a single AN line into dual outlets at a 60 degree angle for clean and efficient routing.
• True 37 Degree AN Flare Seal
  Precision machined flare surface ensures secure metal to metal sealing without leaks.
• 4000 PSI High Pressure Rated
  Built for demanding fuel oil coolant and gas systems in performance applications.
• CNC Machined 6061 T6 Aluminum
  Lightweight yet strong aluminum body with corrosion resistant black anodized finish.
• Ideal for Custom Fuel and EFI Builds
  Perfect for dual fuel feed lines return systems regulator routing and LS swap setups.

Upgrade your fuel system with the EVIL ENERGY Push Lock Hose Fitting. Designed for rubber fuel lines, these fittings deliver a secure, leak-free connection without complex tools. Built from lightweight 6061-T6 aluminum with a black anodized finish, they handle up to 1500 PSI and wide temperature ranges, making them ideal for street, race, and custom performance builds.

Upgrade your automotive fluid transfer system with the EVIL ENERGY AN Hose End Fitting Swivel. Designed for compatibility with CPE braided hoses, these fittings offer versatility and durability. Available in sizes 4/6/8/10/12/16/20 AN, these fittings are suitable for a wide range of applications.

The EVIL ENERGY Female-to-Female AN Union Fitting is a compact and reliable solution for connecting two AN male hose ends. CNC-machined from 6061-T6 aluminum and anodized in black, this straight-through adapter supports 360° swivel, 1500 PSI working pressure, and a precise 37° flare seal. Ideal for EFI conversions, LS swaps, or any high-pressure fluid system where modular plumbing and clean routing are key.

• 90° Compact Elbow Design – Optimized right-angle configuration improves hose routing in tight engine bays, reducing line stress and sharp bends.
• Dual Sealing System – 37° AN flare provides secure metal-to-metal sealing, while the 60° tapered NPT thread ensures tight pipe-side engagement.
• Multiple AN to NPT Combinations – Wide size range supports custom fuel, oil, coolant, and power steering system builds.
• 6061-T6 Aluminum Construction – Lightweight yet high-strength material with corrosion-resistant black anodized finish.
• Performance-Ready Fitment – Designed for high-pressure automotive fluid systems and easy wrench installation.