EVIL ENERGY Carburetor Fuel System Kit, 12V Pump, 4.5-9 PSI Regulator, 20FT NBR/PTFE Fuel Line

About this item

EVIL ENERGY delivers a complete carbureted fuel delivery solution: a high-flow 12V electric fuel pump (external mount, up to 370 LPH), an adjustable 4.5-9 PSI fuel pressure regulator with gauge, and 20 FT of 6AN fuel line - choose the PTFE braided line (E85 / alcohol) or the NBR rubber line (gasoline / diesel). One box, matched fittings, no second order.

Key Features

• COMPLETE CARBURETED KIT: 12V pump + 4.5-9 PSI regulator + 20FT fuel line, all fittings matched so there is no barb-versus-AN mismatch.
• 4.5-9 PSI WITH GAUGE: dial pressure to the carburetor's spec and verify on the included 5-12 PSI gauge - stops flooding at idle and lean-out at wide-open throttle.
• EXTERNAL GEAR PUMP: 12V-13.5V, 345-370 LPH, aluminum body, -68°F to 194°F - no in-tank install, DIY friendly.
• TWO FUEL LINES: NBR rubber (650 PSI working) for gasoline / diesel, or PTFE braided (1500 PSI working, E85-rated hose) for alcohol blends and high-heat bays. The included pump runs gasoline / diesel only.
• CARBURETOR ONLY: built for low-pressure carbureted systems - classic muscle cars, hot rods, motorcycles, generators and small engines.

Evil Energy Carburetor Systems: All-in-One Carbureted Engine Solution

Tailored exclusively for carbureted engines, the bundle integrates a high-performance external fuel pump and a precise pressure regulator. It eliminates separate part sourcing while ensuring seamless component compatibility - ideal for classic car restorations, hot rod builds, and small carbureted engine maintenance.

This EVIL ENERGY kit completes the package with professional-grade 6AN fuel line (PTFE or NBR), creating a true one-stop solution from tank to carburetor.

High-Performance 12V Electric Fuel Pump for Carburetor

• Gear-type external design: no in-tank installation required, simplifying setup for DIY enthusiasts and professional modifiers.
• 12V-13.5V DC compatibility: matches standard automotive electrical systems to avoid power mismatches.
• Weather-resistant aluminum body: -68°F to 194°F range for reliable operation in cold, heat or engine-bay conditions.
• Gasoline & diesel only: use with an inline filter for optimal pump longevity (not rated for E85 / alcohol).

Adjustable 4.5-9 PSI Fuel Pressure Regulator for Carburetor

• 4.5-9 PSI adjustable range: suits carburetor pressure demands, preventing flooding from excessive pressure and fuel starvation from low pressure.
• Multi-fuel regulator: works with gasoline, diesel, E85 and ethanol / alcohol (note: the NBR hose variant is not for E85 - choose the PTFE variant).
• Built-in gauge & durable build: includes a 5-12 PSI gauge for real-time checks; 6061-T6 aluminum alloy body for long-term use.
• Two outlet styles: NBR variant ships 3/8 NPT to 3/8 Barb fittings ; PTFE variant ships 3/8 NPT to 6AN fittings

NBR Rubber vs PTFE Braided Fuel Line: Which Variant?

• Choose the NBR rubber variant: for gasoline and diesel street builds: 3/8 in push-lock hose, 650 PSI working, 10 hose clamps, lowest cost and easy routing. Not for E85.
• Choose the PTFE variant : for E85, alcohol blends or high-heat / high-pressure systems: 6AN PTFE braided hose, 1500 PSI working, full set of 0°/45°/90°/180° AN hose ends.

Seamless Component Compatibility

• Matching connections: the 12V pump (3/8 in ports) and the 4.5-9 PSI regulator (3/8 NPT ports) link through the 20FT fuel line and its fittings - NBR variant uses push-lock barb joints, PTFE variant uses 6AN flare joints, both leak-minimized.
• Complete hardware: pump adapters, regulator fittings, gauge, bracket, port plug, clamps or AN ends and screws are all in the box for immediate assembly. See the carburetor fuel pressure regulator, PTFE fuel line kit and NBR fuel hose kit for individual specs.

Versatile Application Across Equipment

Optimized for 1960s-1980s muscle cars, hot rods, motorcycles and generators - covering common carbureted vehicle and equipment types for reliable daily and hobbyist performance.

What's in the Box — Complete Kit

• 12V Electric Fuel Pump (carburetor): 1 × pump · 2 × 3/8 NPSF to 5/16 in barb adapters · 2 × insulated terminals · 2 × nuts · 2 × washers
• 4.5-9 PSI Fuel Pressure Regulator : 1 × regulator · 1 × 5-12 PSI gauge · 1 × mounting bracket · 1 × 3/8 in NPT port plug · 3 × outlet fittings (3/8 NPT to 3/8 in Barb or 3/8 NPT to 6AN) · 1 × Allen key + sealant tape · self-tapping & cheese-head screws
• NBR Rubber Fuel Line variant adds: 20 FT 3/8 in NBR push-lock hose + 10 hose clamps
• PTFE Braided Fuel Line variant adds: 20 FT 6AN PTFE line with 0°/45°/90°/180° AN hose ends

Brand Summary

Return Reasons

1. Quality Issues: Provide photos/videos; we cover return shipping.
2. Wrong Item Ordered: Buyer covers return shipping; email within 30 days.
3. Change of Mind: Buyer covers return shipping; email within 30 days.
4. Shipping Damage: Inspect packages; do not sign for damaged items.
5. Incorrect Item Shipped: Contact within 7 days.

Price Protection Policy

Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.

Disclaimer

EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.

If you need further information or assistance, feel free to ask!