[40 Micron]
[100 Micron]
[30 Micron]
[10 Micron]

EVIL ENERGY Inline Fuel Filter 10/30/40/100 Micron with Barb 1/2-inch, 3/8-inch, 5/16-inch Fitting Adapter Bundle with AN Fitting Wrench

$71.98
$71.98
Size: 10 Micron
Color: Red
Product Type: Fuel Filter Kits
EVIL ENERGY checkout payment icons and shopping service
EVIL ENERGY Inline Fuel Filter 10/30/40/100 Micron with Barb 1/2-inch, 3/8-inch, 5/16-inch Fitting Adapter Bundle with AN Fitting Wrench

EVIL ENERGY Inline Fuel Filter 10/30/40/100 Micron with Barb 1/2-inch, 3/8-inch, 5/16-inch Fitting Adapter Bundle with AN Fitting Wrench

$71.98
$71.98

EVIL ENERGY Inline Fuel Filter 10/30/40/100 Micron with Barb 1/2-inch, 3/8-inch, 5/16-inch Fitting Adapter Bundle with AN Fitting Wrench

$71.98
Size: 10 Micron
Color: Red

Product Details

Brand EVIL ENERGY
Bundle Includes Inline Fuel Filter × 1 + AN Adjustable Wrench × 1
Filtration Grades 10 / 30 / 40 / 100 micron
Filter Material Aluminum housing + Stainless steel filter element
Adapter Sizes 1/2-inch, 3/8-inch, 5/16-inch barb fittings included
ID
10 Micron: 0.81 inch
30 Micron: 0.81 inch
40 Micron: 0.81 inch
100 Micron: 0.81 inch
OD
10 Micron: 1.25 inch
30 Micron: 1.42 inch
40 Micron: 1.42 inch
100 Micron: 1.25 inch
Width
10 Micron: 4.87 inch
30 Micron: 5.58 inch
40 Micron: 5.48 inch
100 Micron: 4.87 inch
Height
10 Micron: 1.96 inch
30 Micron: 2.27 inch
40 Micron: 2.27 inch
100 Micron: 1.96 inch
Adapter Sizes 1/2-inch, 3/8-inch, 5/16-inch barb fittings included
Fuel Compatibility Gasoline, Diesel
Seal Type High-grade O-ring for leak-proof connection
Flow Direction Arrow-marked for proper installation
Wrench Material 6061-T6 Aerospace-Grade Aluminum
Wrench Range 3-20AN (fits all AN fittings and adapters)
Wrench Size Length: 5.79 in / Width: 3.26 in / Thickness: 0.53 in
Finish Sandblasted — corrosion-resistant
Warranty 1 Year

What's in the Bundle

  • Inline Fuel Filter × 1 — Your choice of 10 / 30 / 40 / 100 micron. Aluminum housing, stainless steel reusable element, with 1/2-inch, 3/8-inch, and 5/16-inch barb adapters and mounting bracket included.
  • AN Adjustable Wrench × 1 — Covers 3-20AN fittings. 6061-T6 aerospace aluminum, quad-contact design, sandblasted finish. Compact enough for tight engine bays.

Inline Fuel Filter

The aluminum housing is lightweight and heat-resistant. The stainless steel filter element is reusable — clean it every 5,000 miles and it keeps performing. Arrow-marked flow direction and high-grade O-ring seal make installation straightforward and leak-free.

Choose your micron rating based on your application:

  • 10–30 micron — fuel injection systems and high-pressure EFI builds
  • 40–100 micron — carbureted setups and coarse pre-filtration

AN Adjustable Wrench

One wrench handles every AN size from -3AN to -20AN. The multi-size quad-contact jaw grips fittings on all four sides — no scratching the anodized finish, no slipping under torque. Pocket-sized and light enough to keep in your toolbox permanently. Works on fuel lines, coolant fittings, oil lines, and any other AN connection in your build.

Why Choose Evil Energy?

At Evil Energy, we are committed to providing reliable and efficient fuel system solutions for global car owners and enthusiasts. Our products are the result of extensive research and rigorous testing to meet the highest standards of quality and performance.

  • Fast Shipping: Orders are processed within 1-2 business days for quick delivery.
  • Easy Returns: Enjoy a hassle-free 90-day return policy with free return shipping (Requires no use or installation, packaging intact). Returns between 90-180 days will be charged a 15% operating fee.
  • Warranty: EVIL ENERGY provides a 1-year warranty on this kit. For questions, reach out to us via email.

For additional information, please contact us at support@ievilenergy.com.

Evil Energy Fuel Parts
Moderate Estimated Time: 0.5-1 hour

Tools Required

  • Combination wrench set
  • AN wrench set
  • Drain pan
  • Marker
  • Drill and drill bits (if required)
  • Safety glasses
  • Fuel-resistant gloves

Pre-Installation Checklist

  • Relieve fuel system pressure and disconnect the negative battery cable.
  • Confirm the correct 10-micron or 100-micron filter and required AN6, AN8, or AN10 fittings are available.
  • Identify the flow-direction arrow on the filter body.
  • Place an approved drain container under the old filter and choose a mounting position away from exhaust heat and moving parts.

Installation Steps

  1. Disconnect the old filter fittings or clamps and remove the filter.
  2. Install the selected AN6, AN8, or AN10 fittings as required; do not apply thread sealant or PTFE tape to AN/ORB connections.
  3. Orient the new filter with its arrow pointing in the direction of fuel flow.
  4. Secure the filter with the supplied mounting bracket and appropriate hardware.
  5. Connect and tighten the fuel lines without overtightening AN fittings.
  6. Prime the fuel system and inspect the filter, fittings, and hoses for leaks before starting the engine.

Post-Installation Verification

  • Verify the filter arrow points in the correct fuel-flow direction.
  • Confirm the filter bracket, fittings, and hoses are secure and clear of heat, sharp edges, and moving parts.
  • Prime the system and check for leaks before starting the engine.
  • Reinspect the filter after the road test and periodically thereafter.

Troubleshooting

  • Low fuel pressure: verify filter orientation and inspect for clogging or restrictions.
  • Fuel leak: turn the ignition OFF, clean spilled fuel, and tighten or replace the affected fitting or hose.
  • Pump noise or inlet restriction: inspect the upstream 100-micron filter and supply-line routing.

Maintenance

  • Inspect the filter and connections periodically and replace a clogged or damaged filter.
  • Recheck all fittings after the initial road test and after 50-100 km.

Brand Summary

Policy Details
Cancellation Policy Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days.
Returns Policy Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days.
Non-Returnable Items Only regular-priced items are eligible for refunds; sale items are non-refundable.
Refund Processing If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com.

Return Reasons

  1. Quality Issues: Provide photos/videos; we cover return shipping.
  2. Wrong Item Ordered: Buyer covers return shipping; email within 30 days.
  3. Change of Mind: Buyer covers return shipping; email within 30 days.
  4. Shipping Damage: Inspect packages; do not sign for damaged items.
  5. Incorrect Item Shipped: Contact within 7 days.

Price Protection Policy

Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.

Disclaimer

EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.

If you need further information or assistance, feel free to ask!

No Amazon reviews available for this product.

RELATED PRODUCTS

RECENTLY VIEWED PRODUCTS