Subscribe now to get a gift with your first order!




|
Product Type
|
Ignition Coil Set
|
|---|---|
|
OEM Replacement Reference
|
UF378
|
|
Bundle Engine Focus
|
Dodge 5.7L 345 cu. in. HEMI V8 applications listed in the Bundle Fitment table below
|
|
Spark Energy
|
Manufacturer-stated +7% versus OE
|
|
Spark Duration
|
1.526 ms
|
|
Maximum Voltage
|
44,000 V
|
|
Primary Resistance
|
0.7 Ω
|
|
Secondary Resistance
|
6.67 kΩ
|
|
Turns Ratio
|
65:1
|
|
Package
|
8 × EVIL ENERGY UF378 replacement ignition coils
|
|
Product Type
|
Automotive Spark Plug Wire / Ignition Wire Set
|
|---|---|
|
Bundle Engine Focus
|
Dodge Gen III 5.7L HEMI V8 applications listed in the Bundle Fitment table below
|
|
Spark Plug Wire Outside Diameter
|
8.5 mm
|
|
Spark Plug Wire Conductor Material
|
Stainless steel wire
|
|
Spark Plug Wire Insulation Material
|
Silicone
|
|
Temperature Range
|
-40°C (-40°F) to 220°C (428°F)
|
|
Wire Resistance
|
293-439 Ω per foot
|
|
Spark Plug Boot Angle
|
90-degree DD style
|
|
EMI / RFI Suppression
|
Yes
|
|
Heat Sleeve Material
|
Basalt
|
|
Heat Sleeve Size
|
22 mm inner diameter × 155 mm length
|
|
Heat Sleeve Temperature Reference
|
Manufacturer-listed 800°C continuous and up to 2000°C instantaneous heat reference
|
|
Color
|
Red
|
|
Package
|
8 × 8.5mm spark plug wires; 8 × basalt heat sleeves; pre-installed coil-end and 90-degree DD-style plug-end boots
|
|
Bundle Fitment — Intersection Only
|
|||
|---|---|---|---|
|
Make
|
Model
|
Engine
|
Year
|
|
Dodge
|
Ram 1500
|
5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
|
2003-2005
|
|
Dodge
|
Ram 2500
|
5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
|
2003-2005
|
|
Dodge
|
Ram 3500
|
5.7L 345Cu. In. V8 GAS OHV Naturally Aspirated
|
2003-2005
|


Aging coils, heat-cycled plug wires, and deteriorated boots can leave the ignition service incomplete when only one part of the 5.7L HEMI system is replaced. This EVIL ENERGY kit combines a complete eight-coil replacement set with eight 8.5mm spark plug wires and basalt heat sleeves for owners maintaining the specified 2003-2005 Dodge Ram 1500, 2500, and 3500 trucks used for daily driving, towing, work, or scheduled ignition-system service.
The ignition coil produces the high-voltage output, while the short secondary wire carries that output through the covered HEMI coil-and-wire layout. Replacing both components during the same service provides a coordinated way to address age, heat exposure, damaged boots, increased wire resistance, and loose coil-to-plug connections. Engine operation still depends on spark plugs, connectors, wiring, grounds, fuel delivery, compression, calibration, and the condition of the remaining systems.


The EVIL ENERGY replacement coil set is listed against the UF378 reference. The manufacturer lists a 44,000 V maximum voltage, 1.526 ms spark duration, 0.7 Ω primary resistance, 6.67 kΩ secondary resistance, and a 65:1 turns ratio. These component specifications do not establish a guaranteed engine-output increase and do not replace diagnosis of the complete ignition and fuel systems.
Before ordering, compare the existing coil connector, mounting points, case shape, and wire connection with the product photos and the original parts on the truck. Prior engine swaps, harness repairs, or ignition-system conversions can change compatibility even when the make, model, engine, and year appear in the table.
The included red spark plug wires use a stainless steel conductor with silicone insulation and a manufacturer-listed resistance of 293-439 Ω per foot. The wire set uses 90-degree DD-style plug-end boots and pre-installed coil-end connections for the referenced 5.7L HEMI layout.
Each wire is paired with a 22 mm × 155 mm basalt heat sleeve. Install the sleeves at the plug end where additional radiant-heat protection is needed, while keeping both the wire and sleeve away from direct exhaust contact, sharp edges, moving parts, and unnecessary tension.
This bundle is limited to 2003-2005 Dodge Ram 1500, 2003-2005 Dodge Ram 2500, and 2003-2005 Dodge Ram 3500 trucks equipped with the 5.7L 345 cu. in. naturally aspirated gasoline V8. No other model, engine size, or year range is included in this bundle listing.
Use the exact vehicle, year, and engine combination: Do not order from the HEMI name alone. Confirm that the truck retains the expected UF378-style coil connector and mounting arrangement, eight-wire layout, and 90-degree plug-boot clearance. Modified, converted, or engine-swapped trucks require direct comparison with the installed components.
|
8 × Replacement Ignition Coils
|
EVIL ENERGY coil set with UF378 replacement reference for the listed Dodge Ram 5.7L HEMI applications.
|
|---|---|
|
8 × 8.5mm Spark Plug Wires
|
Red silicone-insulated ignition wires with pre-installed coil-end and 90-degree DD-style plug-end boots.
|
|
8 × Basalt Heat Sleeves
|
22 mm inner diameter × 155 mm sleeves for added plug-end radiant-heat protection.
|

| Policy | Details |
|---|---|
| Cancellation Policy | Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days. |
| Returns Policy | Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days. |
| Non-Returnable Items | Only regular-priced items are eligible for refunds; sale items are non-refundable. |
| Refund Processing | If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com. |
Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.
EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.
If you need further information or assistance, feel free to ask!
No Amazon reviews available for this product.




