EVIL ENERGY LED Headlights Assembly DOT Approved with DRL Turn Signal High/Low Sealed Beam Side Marker Compatible with 2003-2006 Chevy Silverado Avalanche

DOT SAE LED Headlights for 2003-2006 Chevy Silverado, 2007 Silverado Classic and Avalanche

The split headlamp and corner light design on the NBS Silverado looks dated once the lenses turn yellow and the halogen bulbs dim. The EVIL ENERGY integrated LED headlight assembly combines high beam, low beam, turn signal, side marker and DRL in one sealed unit, with DOT SAE approval, a clear polycarbonate lens and a black housing that modernizes the front of a 2003-2006 Silverado.

Silverado, Silverado Classic and Avalanche Fitment

The LED headlight pair is compatible with:

• 2003-2006 Chevrolet Silverado 1500, 1500 HD, 2500, 2500 HD and 3500
• 2007 Chevrolet Silverado Classic 1500, 1500 HD, 2500 HD and 3500
• 2003-2006 Chevrolet Avalanche 1500 and 2500 without body cladding

Avalanche note: Avalanche trucks with the factory gray plastic body cladding use a different front fascia, so the LED headlamps fit only smooth-body Avalanche models.

Brighter Than Halogen Without Blinding Oncoming Traffic

The NBS Silverado LED headlamps are rated 600% brighter than stock halogens and 4 times brighter than ordinary LED bulbs. A sharp Z-shaped cutoff line puts that light on the road instead of in oncoming windshields, while the even, wide pattern leaves no dim patches or blind spots, so pedestrians and other drivers notice the truck sooner.

• Low beam: 108W, 5,000 lumens per set
• High beam: 168W, 9,400 lumens per set
• Clean cutoff for courteous city and highway driving

8 Breathing Valves Keep the Lenses Clear

Housings with open vent holes let moist air in, which is why many aftermarket headlights fog after a car wash. The EVIL ENERGY 2003-2006 Silverado headlight assembly uses a compact integrated housing bonded with strong adhesive and fitted with 8 one-way breathing valves. Humidity escapes while water stays out, giving IP67 waterproof protection with no corrosion or fogging in extreme weather.

• Sealed design, no open vent holes
• Valves equalize pressure as temperatures swing
• Protects the LED chips from corrosion

Plug and Play With No Extra Parts to Buy

The Silverado LED headlight kit includes every part needed for the swap, so no extra bulbs or wiring harnesses are required. Each headlamp lines up with the grille and fender with no gaps, and the install needs no wire cutting or modification.

• Factory mounting points, factory connectors
• Flush fit against the body lines
• Installation manual in the box

What If a Light Stays Off After Plugging In?

The NBS Silverado LED headlamps are polarity sensitive. When a connector goes in the wrong way round, that function stays dark, and the fix takes seconds:

1. Unplug the connector for the function that is not lighting.
2. Rotate the plug 180° and push the plug back in firmly.
3. Recheck high beam, low beam, turn signal, side marker and DRL.

Read the installation manual before starting for the smoothest install.

No More Yellow Lenses Every Few Years

Yellowed, hazy lenses are the reason most NBS Silverado owners start shopping. A shatterproof, anti-yellowing PC lens, a fully sealed heavy-duty housing and high-intensity LED chips rated for 50,000 hours keep the LED headlamp pair clear and bright for the long haul, avoiding the cycle of lens restoration kits and frequent replacement.

• LED chips rated for 50,000 hours
• Lens resists yellowing and impacts
• Housing built to handle road vibration

A Complete Driver and Passenger Set

Each order of the 2003-2006 Silverado headlight assembly ships as a matched pair, so both sides of the truck share the same color, brightness and beam pattern.

• Left (driver side) LED headlight
• Right (passenger side) LED headlight
• Installation manual