Subscribe now to unlock $9.99 deals
| Brand | EVIL ENERGY |
| Product type | Wheel Spacers |
| Grade Type | Performance |
| Bolt pattern (PCD) | 6x135mm / 6x5.31in |
| Lug Count | 6 |
| Center bore | 87.1mm / 3.43in |
| Thickness | Optional: 1.5 inch / 38.1mm / 2 inch / 50.8mm |
| Centering Type | Hub Centric Wheel Spacer |
| Pilot Boss | Yes |
| Spacer Body Material | 6061-T6 aircraft-grade aluminum billet |
| Spacer Manufacturing Process | CNC machined |
| Spacer Surface Finish | Anodized |
| Wheel spacer Color | Black |
| Fastener thread pitch | M14x2.0 |
| Fastener strength grade | 10.9 |
| Fastener coating | Geomet |
| Fastener Material | Not specified on product page |
| Set quantity | 4 pieces |
| Package contents | 4 wheel spacers |
| Compatibility |
Ford: • 2003–2014 Expedition • 2004–2014 F-150 Lincoln: • 2006–2014 Mark LT • 2003–2014 Navigator |
| Installation location | Between hub assembly and wheel |
| Buyer verification note | Verify vehicle year/make/model, hub bore, and stud thread pitch before purchase; professional installation recommended |
EVIL ENERGY 6x135 hub-centric wheel spacers fit the 2004-2014 Ford F-150, 2003-2014 Ford Expedition, 2003-2014 Lincoln Navigator and 2006-2014 Lincoln Mark LT. The hubcentric wheel spacer kit uses an 87.1mm bore, an 87.1mm pilot boss and M14x2.0 studs, the thread used on these pre-2015 Ford trucks, in 1.5 or 2 inch thickness.
Improve grip, stability and handling on a 2004-2014 F-150 with spacers that keep Ford's hub-centric fit. The 87.1mm bore locates on the hub, the pilot boss centers the wheel, and the M14x2.0 studs match the factory lug nuts, so installation needs no new hardware.

The compatibility chart shows the Ford and Lincoln trucks that share the 6x135 pattern with M14x2.0 studs: the 2003-2014 Expedition, 2004-2014 F-150, 2006-2014 Mark LT and 2003-2014 Navigator.
A wider track improves stability, lowers the center of gravity feel and reduces body roll, while the wheels move out for a more aggressive, dynamic look. On an Expedition or Navigator, the extra width also makes the tall SUV feel steadier in crosswinds.


The before-and-after image shows the same truck with the wheels moved 1.5 inches outward. The front tires now line up with the fender flares, giving the F-150 a planted stance and more room from the upper control arm for a wider tire.
The studs are 35CrMo alloy steel, heat treated to grade 10.9 for high strength and zinc plated against rust. The spacer body is hot-forged 6061-T6 aluminum, anodized and CNC machined so the faces stay flat and the pilot stays concentric.


Cast aluminum spacers can carry internal voids. Hot forging compresses the aluminum into a dense, uniform structure, which is why this 2 inch hub centric wheel spacer handles the weight of a full-size Ford truck.
Ford changed the stud thread for the 2015 model year. Pick by year:
| Model years | Stud thread | Correct EVIL ENERGY spacer |
|---|---|---|
| 2004-2014 F-150, 2003-2014 Expedition and Navigator | M14x2.0 | This kit (1.5 or 2 inch) |
| 2015 and newer F-150, Expedition, Navigator | M14x1.5 | The 2015+ F-150 6x135 spacer (1.25 or 1.5 inch) |
Check the thread on a lug nut if you are unsure: an M14x2.0 nut will not thread onto an M14x1.5 stud.
Remove the wheel, clean the hub surface, install the spacer on the hub and fasten it, then install the wheel. The studs come pre-installed, so the job needs only a jack, stands and a torque wrench.


Tighten the six nuts in a star pattern. The EVIL ENERGY chart lists 85-95 ft-lb for 14mm spacer nuts; torque the wheel lug nuts to 150 lb-ft, the Ford spec for these trucks. Do the final tightening by hand with a calibrated torque wrench and recheck after 50-100 miles.
The 2004-2008 F-150 introduced a fully boxed frame and the 5.4L three-valve V8, and the 2009-2014 truck added the 5.0L Coyote and the 3.5L EcoBoost that changed what a half-ton could tow. These trucks remain workhorses for small businesses and families, and a hub-centric spacer set is a practical way to fit wider tires without replacing good factory wheels.

Aluminum-body F-150 trucks moved to M14x1.5 studs and need their own 6x135 spacer. Every option is listed in the EVIL ENERGY wheel spacer collection.
Shop 2015+ F-150 Spacers →| Policy | Details |
|---|---|
| Cancellation Policy | Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days. |
| Returns Policy | Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days. |
| Non-Returnable Items | Only regular-priced items are eligible for refunds; sale items are non-refundable. |
| Refund Processing | If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com. |
Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.
EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.
If you need further information or assistance, feel free to ask!
No Amazon reviews available for this product.