Subscribe now to unlock $9.99 deals
| Brand | EVIL ENERGY |
| Auto Part Position | Front |
| Material | Forged 6061-T6 aluminum |
| Included Components | • 2 × front strut spacers (housing) with pre-installed studs • Lock nuts and washers • Installation instructions |
| Maximum Lifting Height | • 2 inch option • 3 inch option |
| Spacer Thickness | • 2 inch lift: 1.34 in • 3 inch lift: 2.00 in |
| Bolt Grade | 12.9 grade |
| Finish | Red anodized, heat treated |
| Compatible Models |
Front Leveling Kit for Chevy • 2007-2023 Chevy Silverado 1500 2WD • 2007-2023 Chevy Silverado 1500 4WD Front Leveling Kit for GMC • 2007-2023 GMC Sierra 1500 2WD • 2007-2023 GMC Sierra 1500 4WD |
| Not Compatible | • Silverado 2500HD / 3500HD • Sierra 2500HD / 3500HD |
| Installation | Bolt-on; no cutting, drilling or coil spring compression |
Designed specifically for Chevy Silverado owners, this Silverado 1500 front leveling kit improves the suspension's stance by raising the front height. GM builds the half-ton with the nose sitting lower than the bed, so a loaded truck still rides flat; on an empty daily driver that rake simply looks nose-down. Two forged aluminum strut spacers lift the front 2 or 3 inches, so the front fenders line up with the bed and the truck is better equipped for rough terrain, with better ground clearance and stability off-road.
The same strut spacers fit the GMC Sierra 1500 from 2007 through 2023, in both 2WD and 4WD.
High-Strength Forged Aluminum
Crafted from high-strength forged 6061-T6 aluminum, providing exceptional durability and corrosion resistance to withstand tough driving conditions.
Increased Front Height
Raises the front by 2-3 inches, improving visibility and road adaptability, particularly for off-road driving.
Easy Installation
No modification to the original vehicle structure required, with a simple installation process suitable for DIY enthusiasts, saving both time and installation costs.
Perfect Fit for 2007-2023 Chevy Silverado
Designed specifically for 2007-2023 Chevy Silverado 1500 and GMC Sierra 1500 models, ensuring a seamless fit and optimal performance.
Enhanced Suspension Performance
Improves suspension system performance, increasing stability on rough terrains and uneven surfaces.
Durability and Safety
Corrosion-resistant and rust-proof, designed to handle all weather conditions and terrains, ensuring long-term reliability and safety.

The 2 inch Silverado leveling kit uses a 1.34 inch thick spacer and cancels most of the factory rake, so the truck sits close to flat from front to rear. It suits a daily driver that keeps a near-stock tire size.
The 3 inch Silverado leveling kit uses a 2.00 inch spacer. The nose ends up slightly higher than the bed, which leaves room for a heavier steel front bumper, a winch, or a 33 inch class all-terrain tire.
Because the strut mounts partway along the lower control arm, the lift at the fender is about 1.5 times the spacer thickness.
2 inch lift · spacer 1.34 in
Near-level stance, stock-size tires, daily driving
3 inch lift · spacer 2.00 in
Slight nose-high stance, steel bumper or winch, 33 inch class tires

The Silverado 1500 strut spacers fit three generations of GM half-ton pickups:
Chevy Silverado 1500: 2007-2023, 2WD / 4WD
GMC Sierra 1500: 2007-2023, 2WD / 4WD
Does not fit Silverado or Sierra 2500HD / 3500HD trucks, which use torsion-bar front suspension

Anodizing turns the outer layer of the aluminum into a hard oxide shell. On a Silverado front strut spacer that sits right above the wheel, that shell resists road salt, brine and gravel spray, so the part does not chalk or corrode after a few winters.

6061-T6 is a heat-treated aluminum alloy widely used in truck and aircraft structures. Forging the billet before machining aligns the grain, so the forged Silverado leveling spacer keeps its shape under the front corner weight of a full-size pickup while weighing far less than steel.

Every stud hole is CNC drilled to line up with the factory strut top mount, so the Silverado 1500 leveling kit bolts on without slotting holes or forcing studs into place.

Grade 12.9 is the highest common metric strength class. The kit's studs and lock nuts hold the strut to the spacer through potholes, washboard roads and trail hits, and the lock nuts resist backing off from vibration.

Heat treating brings 6061 aluminum to its T6 temper, raising hardness and fatigue strength. That matters on a part loaded and unloaded thousands of times every mile on a 2007-2023 Silverado 1500.

Most owners finish in about 1-2 hours per truck with a floor jack, jack stands, metric sockets and a torque wrench. The coil spring stays assembled the whole time.
1
Remove the strut assembly: lift the truck, remove the wheel, disconnect the sway bar end link and upper control arm ball joint, and unbolt the strut.
2
Find the installation position: the spacer goes on top of the strut, between the upper mount and the frame bucket.
3
Install the leveling spacer: bolt the spacer to the strut top with the supplied nuts.
4
Install back to the vehicle: reinstall the strut, torque every fastener to factory spec, then get a front-end alignment and re-aim the headlights.
The 3 inch front and 2 inch rear Silverado kit adds rear lift blocks and U-bolts. After leveling, many owners widen the stance with 6x5.5 wheel spacers for Silverado and Sierra, or compare every option in our truck leveling kits and lift blocks.
Elevate your truck's stance with our suspension upgrades, including leveling kits, lift blocks, wheel spacers and coilovers for Silverado, Sierra and other full-size pickups.
We prioritize quality control, ensuring each component meets rigorous standards for perfect fitment and durability, effectively addressing common suspension challenges faced by truck owners.
Enhanced Performance
Our suspension parts add ground clearance and room for larger tires on your truck.
Professional Grade
Ideal for serious modifiers seeking reliable and high-performance upgrades.
Fast Shipping
Orders are processed within 1-2 business days for quick delivery.
Easy Returns
Enjoy a hassle-free 90-day return policy with free return shipping (Requires no use or installation, packaging intact). 90-180 days will be charged a 15% operating fee.
Warranty
EVIL ENERGY provides 1-year warranty on this kit. For questions, reach out to us via email.
For additional information, please contact us at support@ievilenergy.com.

| Policy | Details |
|---|---|
| Cancellation Policy | Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days. |
| Returns Policy | Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days. |
| Non-Returnable Items | Only regular-priced items are eligible for refunds; sale items are non-refundable. |
| Refund Processing | If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com. |
Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.
EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.
If you need further information or assistance, feel free to ask!