Subscribe now to unlock $9.99 deals




| Brand | EVIL ENERGY |
| Compatibility |
Coilovers for Honda • 2007 Honda Fit (Base, Sport) • 2008 Honda Fit (Base, Sport) |
| Ride Height | Lowers 2 to 4 in, adjustable |
| Damper Type | Twin-tube |
| Spring Rate | • Front: 6 kg/mm (336 lb/in) • Rear: 6 kg/mm (336 lb/in) |
| Spring Length | • Front: 200 mm • Rear: 200 mm |
| Spring | Heat-treated high-strength steel, anti-corrosion coating, 60,000+ cycle fatigue tested |
| Construction | • Steel body • Steel plate top mounts • Upper spring seat with radial bearing • Rubber dust boots • Heavy-duty steel lower mounts |
| Color | Red |
| Package Includes | • 2 front coilover struts • 2 rear shocks • 2 rear springs with adjustable seats • 2 spanner wrenches • 2 mounting brackets |
Honda Fit 2007-2008 Suspension
The EVIL ENERGY coilovers for Honda Fit 2007-2008 replace the worn factory struts and shocks on a first-generation Fit and let you set the stance yourself, anywhere from 2 to 4 in lower. Twin-tube dampers keep the ride compliant enough for daily commuting, while matched 336 lb/in springs cut body roll and sharpen the Fit's steering. Professional installation is recommended.
✓ Fits
2007 Honda Fit, Base and Sport
2008 Honda Fit, Base and Sport
✕ Does not fit
2009-2014 Honda Fit, which uses a different chassis. Choose the coilovers for Honda Fit 2009-2014 instead.
2-4 in
Adjustable drop
336 lb/in
Front and rear springs
60,000+
Spring fatigue cycles
Twin-tube
Daily-friendly damping
The kit follows the first-generation Fit's layout: MacPherson struts up front and an H-shaped torsion beam in the rear, where the spring and shock sit separately. You get two front coilover struts with springs and steel top mounts already assembled, two rear shocks, two rear springs on threaded height-adjustable seats, plus the spanner wrenches used to set ride height.
After well over a decade on the road, the factory dampers on most 2007 and 2008 Honda Fits are tired: the nose dives under braking, the rear floats over dips, and the car leans hard in on-ramps. A height-adjustable coilover kit fixes the worn dampers and lowers the car in one job, so every commute starts on fresh, controlled suspension.

A spring alone keeps bouncing after a bump; the damper's job is to stop it. The twin-tube shocks absorb the spring's rebound in one controlled stroke instead of letting the body oscillate, so expansion joints and potholes register as a single firm thump rather than a wallowing aftershock.
Street roads for the daily commute, mountain roads where lower body roll keeps the Fit flat through switchbacks, and track days where quicker turn-in pays off. Set the drop to match where you spend most of your miles.


The springs are high-rigidity steel with an anti-corrosion coating, fatigue tested past 60,000 compression cycles, so the ride height you set stays where you set it. The red coating also stands up to the road salt and slush that eat bare springs on winter cars.
Each spring is formed from high-temperature forged carbon steel, then heat treated for higher stiffness and longer service life. That process is what lets a 200 mm spring hold a 336 lb/in rate without taking a set.


A twin-tube shock places its oil reserve around the working tube, which leaves more room for usable stroke in the same length and keeps friction low.
For a Fit that commutes on broken pavement, that means a calmer ride on uneven roads and less fatigue on long drives. Mono-tube designs suit dedicated track cars that trade comfort for maximum heat control.
Lower center of gravity
Less lean in corners and crosswinds.
Better drivability
Quicker, more precise steering response.
Cushioning
Twin-tube damping keeps daily comfort.
Robust build
Steel body, top mounts and lower mounts.
Pick the drop by how you drive and which wheels you run.
| Drop | Best for | Keep in mind |
| About 2 in | Daily driving, steep driveways, factory 14 in or 15 in wheels | Most ride comfort and ground clearance |
| About 3 in | Spirited street driving, closing the wheel gap on a Fit Sport | Take speed bumps and parking blocks at an angle |
| Up to 4 in | Show stance and tucked wheels | Check tire-to-fender clearance at full lock and get an alignment |
Step 1
Measure fender height at all four corners and decide on your target drop.
Step 2
Use the spanner wrench to set the height, then tighten the locking ring against it.
Step 3
Install each coilover in place of the factory strut, and the rear shocks and springs on the torsion beam.
Step 4
Confirm every component sits correctly and every bolt is fixed and torqued, then book an alignment.
Lowering more than one Honda in the garage? Browse all coilover suspension kits.
| Policy | Details |
|---|---|
| Cancellation Policy | Orders can be canceled within 48 hours of placement. Refund processed in 3-5 business days. |
| Returns Policy | Returns accepted within 180 days. Full refund within 90 days; 15% fee for 90-180 days. |
| Non-Returnable Items | Only regular-priced items are eligible for refunds; sale items are non-refundable. |
| Refund Processing | If no refund received, check your bank/credit card. For ongoing issues, contact support@ievilenergy.com. |
Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.
EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.
If you need further information or assistance, feel free to ask!
No Amazon reviews available for this product.



