EVIL ENERGY 6AN 16/20FT PTFE Fuel Line Kit with 5–12 PSI Regulator & 10 Micron Filter

6AN PTFE Fuel Routing for Carbureted Builds

The EVIL ENERGY 6AN PTFE Fuel Line Bundle brings together adjustable fuel pressure control, selectable inline filtration and cut-to-length braided hose for carbureted projects. Plan a fuel line refresh for a classic car, hot rod or custom build using a 5–12 PSI fuel pressure regulator, serviceable filtration and multiple hose-end angles.

Choose this configuration when your carburetor requires pressure within the regulator's adjustment range and your planned hose route fits within the selected 16 ft or 20 ft hose length. Confirm the carburetor's required fuel pressure before purchase.

5–12 PSI Adjustment with an Included Pressure Gauge

Set fuel delivery pressure to suit your carburetor's specified requirement within the 5–12 PSI range. The included gauge provides a visible pressure reading during setup, while the mounting bracket supports securing the regulator in your planned installation. The regulator body is made from 6061-T6 aluminum.

Choose Your Filter Rating and Hose Length

The inline filter combines an aluminum housing with a stainless steel element that can be cleaned and reused. Select 10, 30, 40 or 100 micron filtration, or choose the 10 + 100 micron configuration for two separate filters. Each filter includes a bracket. Select 16FT or 20FT hose to match your measured routing length. Follow the manufacturer's flow direction and servicing instructions.

Select filter placement according to your fuel pump's filtration and inlet-restriction requirements. This bundle does not include a fuel pump.

16FT or 20FT PTFE Hose with Four Hose-End Angles

Cut the 6AN hose to suit your measured route. Straight, 45°, 90° and 180° PTFE hose ends give you options for approaching components and routing around nearby hardware. The two hose separators help organize adjacent runs.

Allow for the hose's 3.5-inch minimum bend radius when planning corners. PTFE hose should not be folded or kinked; choose a suitable hose-end angle where a tight change of direction is needed.

Why Choose This Carburetor Fuel Line Bundle?

• Plan pressure control and filtration together: A defined regulator range and filter rating help you compare the bundle with your carburetor and pump requirements.
• Adapt the route to your build: Cut-to-length hose and four hose-end angles support different component positions without relying on tight hose bends.
• Keep service access in mind: A cleanable filter element and separate mounting brackets support an accessible layout for inspection and maintenance.

When to Choose the 10 + 100 Micron Option

This configuration includes one 100 micron filter and one 10 micron filter. Use two stages only when their placement and restriction meet your pump manufacturer's requirements; the two filters are separate units, not two elements inside one housing.

Check Fuel Pressure, Threads and Hose Routing Before Installation

• Use a fuel pump suitable for the regulator's inlet requirements and the engine's fuel demand. This regulator is for low-pressure carbureted applications, not EFI operating pressure.
• Confirm each mating connection before assembly. AN flare, ORB and NPT interfaces use different sealing methods and are not interchangeable.
• The added adapters have 6AN male flare and 10AN ORB male ends. Verify that the intended mating ports have the corresponding threads and sealing seats.
• Use PTFE-compatible hose ends with the supplied PTFE hose. The filter's supplied barb adapters are alternative connections for suitable barb-compatible hose; they do not replace PTFE hose ends.
• Fuel tank, fuel pump, electrical components and vehicle-specific carburetor connections are not included. Additional parts depend on your installation.
• Confirm compatibility of the regulator, filter, seals and all other fuel-system components before using E85 or other ethanol blends. A hose's fuel compatibility does not establish compatibility of the entire system.
• Follow the component manuals for assembly, sealing and mounting. Keep fuel lines away from exhaust heat and moving parts, and check all connections for leaks before operation.

Brand Summary

Return Reasons

1. Quality Issues: Provide photos/videos; we cover return shipping.
2. Wrong Item Ordered: Buyer covers return shipping; email within 30 days.
3. Change of Mind: Buyer covers return shipping; email within 30 days.
4. Shipping Damage: Inspect packages; do not sign for damaged items.
5. Incorrect Item Shipped: Contact within 7 days.

Price Protection Policy

Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.

Disclaimer

EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.

If you need further information or assistance, feel free to ask!