EVIL ENERGY Cold Air Intake & 90mm Throttle Body Kit for 2012-2018 Dodge Ram 1500 5.7L HEMI

2012-2018 Dodge Ram 1500 5.7L HEMI Cold Air Intake & 90mm Throttle Body Kit

The intake system on a 2012-2018 Dodge Ram 1500 5.7L V8 HEMI moves air from the filter and intake tube through the electronic throttle body before that airflow reaches the intake manifold. Upgrading only one section can leave another section of the airflow path unchanged. This EVIL ENERGY bundle combines a vehicle-specific cold air intake kit with a 90mm electronic throttle body with TPS to address both the upstream air-delivery section and the electronically controlled throttle section of the 2012-2018 Dodge Ram 1500 5.7L HEMI intake path.

The cold air intake replaces the factory-style intake tract with a large aluminum tube, washable cotton-gauze filter, pre-filter, and steel heat shield. The 90mm electronic throttle body then controls the airflow entering the engine using an integrated TPS and a 6-pin electronic connector. Together, the two components create a coordinated intake-side upgrade for the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI, while still requiring the installer to verify the original throttle-body connector, mounting pattern, intake coupler connection, sensors, and final routing before installation.

Fitment first: This bundle listing is intentionally limited to the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI. Do not use the additional fitments shown on either individual product page to expand this bundle application. The shared vehicle and engine fitment for this combination is 2012-2018 Dodge Ram 1500 5.7L V8 HEMI only.

Why Pair a Cold Air Intake with a 90mm Electronic Throttle Body?

On the 2012-2018 Dodge Ram 1500 5.7L HEMI, the cold air intake and throttle body are neighboring parts of the same airflow path but perform different functions. The cold air intake filters incoming air and routes it toward the engine, while the electronic throttle body regulates how much of that airflow is admitted in response to driver demand and electronic throttle-control commands.

Using the two components together creates a more complete intake-side service and upgrade package than replacing either component alone. The large aluminum intake tube and filter assembly are intended to reduce unnecessary intake restriction upstream, while the 90mm throttle plate provides the electronically controlled airflow opening downstream. For the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI, this makes the combination especially relevant when the goal is to refresh or upgrade the complete path from the filter assembly to the throttle-body entrance rather than treating the two components as unrelated parts.

Cold Air Intake — Air Delivery Side

The EVIL ENERGY cold air intake in this bundle is the vehicle-specific intake component for the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI. It uses a black aluminum intake tube, red oiled cotton-gauze filter, pre-filter, and steel heat shield. The product page describes the intake tube with smooth bends intended to support a less restrictive airflow path than the original intake arrangement.

The steel heat shield separates the filter area from direct engine-bay heat, while the washable and reusable cotton-gauze filter handles incoming-air filtration. The supplied pre-filter provides an additional layer around the main filter, particularly useful where the 2012-2018 Dodge Ram 1500 5.7L HEMI is exposed to dust, road debris, towing environments, or off-road use.

The individual intake product page lists an approximately 40-minute installation with basic tools and no cutting or drilling. Actual installation time can vary with vehicle condition, existing modifications, fastener condition, and installer experience. All clamps, couplers, sensors, and connections should be checked before startup.

90mm Electronic Throttle Body — Airflow Control Side

After air moves through the intake tube on the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI, the electronic throttle body controls the opening through which that air enters the engine. The EVIL ENERGY throttle body in this bundle uses a 90mm throttle diameter, aluminum-alloy construction, a 6-pin 1×6 electrical connector, and an included 0-5V Hall-effect TPS. The product page also lists a 96mm throttle bore and a 4-bolt mounting design.

The product page lists an approximate electronic response reference of 200ms when opening and approximately 200ms when closing. For the 2012-2018 Dodge Ram 1500 5.7L HEMI, correct installation depends on the electronic connector, throttle-body mounting surface, intake-tube coupler, TPS operation, and the vehicle's electronic throttle-control system all being compatible.

Because this is an electronically controlled throttle body, the installer should not treat it like a mechanical cable-operated throttle body. Follow the vehicle service procedure for battery disconnection, connector handling, throttle-body installation, and any applicable relearn or diagnostic procedure after installation.

Fitment — 2012-2018 Dodge Ram 1500 5.7L V8 HEMI Only

This bundle is written and configured specifically for the 2012-2018 Dodge Ram 1500 5.7L V8 HEMI. The cold air intake product individually supports a broader Ram year range, and the throttle body product individually lists additional Dodge, Ram, Chrysler, and Jeep applications. Those additional applications are intentionally excluded here because they are not part of the requested shared-fitment combination.

Do not determine fitment from “Ram 1500” or “5.7L HEMI” alone. For this combination, confirm all of the following before ordering: the truck is within the 2012-2018 model-year range, uses the 5.7L V8 HEMI gasoline engine, has a compatible throttle-body mounting pattern, uses the required 6-pin 1×6 connector layout, and provides compatible intake-tube, sensor, and engine-bay connections.

Package Contents

Brand Summary

Return Reasons

1. Quality Issues: Provide photos/videos; we cover return shipping.
2. Wrong Item Ordered: Buyer covers return shipping; email within 30 days.
3. Change of Mind: Buyer covers return shipping; email within 30 days.
4. Shipping Damage: Inspect packages; do not sign for damaged items.
5. Incorrect Item Shipped: Contact within 7 days.

Price Protection Policy

Effective from August 25, 2024. Price drops within 7 days of purchase can be claimed.

Disclaimer

EVIL ENERGY reserves the right to interpret, modify, or terminate this policy in accordance with applicable laws and regulations.

If you need further information or assistance, feel free to ask!