{"product_id":"carburetor-fuel-pump-pressure-regulator-fuel-line-kit","title":"EVIL ENERGY Carburetor Fuel System Kit, 12V Pump, 4.5-9 PSI Regulator, 20FT NBR\/PTFE Fuel Line","description":"\u003cp\u003e---!@!start!@!---Specifications---!@!end!@!---\u003c\/p\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/www.ievilenergy.com\/products\/12v-fuel-pump-for-carb\"\u003e12V Electric Fuel Pump for Carburetor\u003c\/a\u003e\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32%; min-width: 120px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet \/ Outlet\u003c\/td\u003e\n\u003ctd\u003e3\/8 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Location\u003c\/td\u003e\n\u003ctd\u003eExternal (inline) fuel pump - no in-tank install required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump Type\u003c\/td\u003e\n\u003ctd\u003eGear-type electric fuel pump for carburetor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V - 13.5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosed Pressure\u003c\/td\u003e\n\u003ctd\u003e14 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow Rate\u003c\/td\u003e\n\u003ctd\u003e345-370 LPH (91.1-97.8 GPH) at 10-11 PSI, 5.6-6.0A\u003cbr\u003e320-345 LPH (84.5-91.1 GPH) at 7-9 PSI, 5.5-6.3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-68°F to 194°F (-56°C to 90°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Power\u003c\/td\u003e\n\u003ctd\u003e88W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum housing with red mounting bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eGasoline, Diesel (use with an inline filter for best longevity)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCarbureted fuel systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents\u003c\/td\u003e\n\u003ctd\u003e1 × 12V fuel pump\u003cbr\u003e2 × 3\/8 NPSF to 5\/16 Barb adapters\u003cbr\u003e2 × insulated terminals\u003cbr\u003e2 × nuts\u003cbr\u003e2 × washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/www.ievilenergy.com\/products\/carburetor-fuel-pressure-regulator\"\u003eCarburetor Fuel Pressure Regulator (4.5-9 PSI)\u003c\/a\u003e\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32%; min-width: 120px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable Range\u003c\/td\u003e\n\u003ctd\u003e4.5-9 PSI (set by adjustment screw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eNon-vacuum referenced - holds steady pressure across the RPM range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Sizes\u003c\/td\u003e\n\u003ctd\u003e1 × 1\/8 in NPT gauge port + 3 × 3\/8 in NPT feed \/ return ports (includes 1 × 3\/8 in NPT port plug to block an unused port in dead-head setups)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Fittings - NBR Variant\u003c\/td\u003e\n\u003ctd\u003e3 × 3\/8 in NPT to 3\/8 in Barb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Fittings - PTFE Variant\u003c\/td\u003e\n\u003ctd\u003e3 × 3\/8 in NPT to 6AN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Aluminum Alloy, corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Gauge\u003c\/td\u003e\n\u003ctd\u003e5-12 PSI mechanical pressure gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eGasoline, E85, Diesel, Ethanol \/ Alcohol (regulator rated; the NBR hose variant is not for E85 - choose the PTFE variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCarburetor only - not for EFI systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents\u003c\/td\u003e\n\u003ctd\u003eRegulator, 5-12 PSI gauge, mounting bracket, 3 outlet fittings (barb or 6AN), 1 × 3\/8 NPT port plug, Allen key + sealant tape, self-tapping \u0026amp; cheese-head screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/www.ievilenergy.com\/products\/ptfe-fuel-line-kit-20ft?_pos=1\u0026amp;_sid=41eac50c4\u0026amp;_ss=r\u0026amp;variant=41126723944584\"\u003e20FT 6AN PTFE Fuel Line Kit\u003c\/a\u003e\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32%; min-width: 120px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eHose ID 0.315 in (8 mm) \/ OD 0.465 in (11.81 mm) \/ Min bending radius 3.5 in (88.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20 FT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure \u0026amp; Temp\u003c\/td\u003e\n\u003ctd\u003eWorking 1500 PSI \/ Burst 4500 PSI \/ -76°F to 446°F (-60°C to 230°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePTFE inner core + stainless steel braid + nylon braided jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eGasoline, Diesel, E85, Ethanol blends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Includes\u003c\/td\u003e\n\u003ctd\u003e20FT PTFE line ×1\u003cbr\u003estraight fittings ×4\u003cbr\u003e45° ×2\u003cbr\u003e90° ×2\u003cbr\u003e180° ×2\u003cbr\u003ehose separator clamps ×2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/www.ievilenergy.com\/products\/an-fuel-line-kit-push-lock-rubber?_pos=1\u0026amp;_sid=e23249b07\u0026amp;_ss=r\u0026amp;variant=44271677603976\"\u003e3\/8 Inch 20FT NBR Fuel Hose Kit\u003c\/a\u003e\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32%; min-width: 120px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eID 0.38 in\u003cbr\u003eOD 0.65 in\u003cbr\u003eMin bending radius 66 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Clamp\u003c\/td\u003e\n\u003ctd\u003e13-19 mm (10 pcs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20 FT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure \u0026amp; Temp\u003c\/td\u003e\n\u003ctd\u003eWorking 650 PSI\u003cbr\u003eBurst 1180 PSI\u003cbr\u003e-4°F to 212°F (-20°C to 100°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCPE outer layer + NBR rubber inner tube + polyester braid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eGasoline, Diesel, Engine Oil (not recommended for E85 \/ alcohol)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Includes\u003c\/td\u003e\n\u003ctd\u003e20FT 3\/8 in NBR fuel line ×1\u003cbr\u003ehose clamps ×10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e---!@!start!@!---Description---!@!end!@!---\u003c\/p\u003e\n\u003ch2\u003eAbout this item\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEVIL ENERGY\u003c\/strong\u003e delivers a \u003cstrong\u003ecomplete carbureted fuel delivery solution\u003c\/strong\u003e: a high-flow \u003cstrong\u003e12V electric fuel pump\u003c\/strong\u003e (external mount, up to 370 LPH), an adjustable \u003cstrong\u003e4.5-9 PSI fuel pressure regulator\u003c\/strong\u003e with gauge, and 20 FT of 6AN fuel line - choose the \u003cstrong\u003ePTFE braided line\u003c\/strong\u003e (E85 \/ alcohol) or the \u003cstrong\u003eNBR rubber line\u003c\/strong\u003e (gasoline \/ diesel). One box, matched fittings, no second order.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMPLETE CARBURETED KIT:\u003c\/strong\u003e 12V pump + 4.5-9 PSI regulator + 20FT fuel line, all fittings matched so there is no barb-versus-AN mismatch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5-9 PSI WITH GAUGE:\u003c\/strong\u003e dial pressure to the carburetor's spec and verify on the included 5-12 PSI gauge - stops flooding at idle and lean-out at wide-open throttle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXTERNAL GEAR PUMP:\u003c\/strong\u003e 12V-13.5V, 345-370 LPH, aluminum body, -68°F to 194°F - no in-tank install, DIY friendly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTWO FUEL LINES:\u003c\/strong\u003e NBR rubber (650 PSI working) for gasoline \/ diesel, or PTFE braided (1500 PSI working, E85-rated hose) for alcohol blends and high-heat bays. The included pump runs gasoline \/ diesel only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCARBURETOR ONLY:\u003c\/strong\u003e built for low-pressure carbureted systems - classic muscle cars, hot rods, motorcycles, generators and small engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEvil Energy Carburetor Systems: All-in-One Carbureted Engine Solution\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTailored exclusively for carbureted engines, the bundle integrates a high-performance external fuel pump and a precise pressure regulator.\u003c\/strong\u003e It eliminates separate part sourcing while ensuring seamless component compatibility - ideal for classic car restorations, hot rod builds, and small carbureted engine maintenance.\u003c\/p\u003e\n\u003cp\u003eThis EVIL ENERGY kit completes the package with professional-grade \u003cstrong\u003e6AN fuel line\u003c\/strong\u003e (PTFE or NBR), creating a true one-stop solution from tank to carburetor.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/A_PC_-1_c92ba08f-5290-4dc5-a2a2-ecdb33eaeb82.webp?v=1759211512\" alt=\"EVIL ENERGY complete carbureted fuel system kit overview with 12V pump, pressure regulator and 20FT fuel line\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHigh-Performance 12V Electric Fuel Pump for Carburetor\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear-type external design:\u003c\/strong\u003e no in-tank installation required, simplifying setup for DIY enthusiasts and professional modifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V-13.5V DC compatibility:\u003c\/strong\u003e matches standard automotive electrical systems to avoid power mismatches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant aluminum body:\u003c\/strong\u003e -68°F to 194°F range for reliable operation in cold, heat or engine-bay conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasoline \u0026amp; diesel only:\u003c\/strong\u003e use with an inline filter for optimal pump longevity (not rated for E85 \/ alcohol).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/200_x_225_50_x_50_1.png?v=1763445085\" alt=\"EVIL ENERGY 12V electric gear fuel pump for carburetor external inline mount\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAdjustable 4.5-9 PSI Fuel Pressure Regulator for Carburetor\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5-9 PSI adjustable range:\u003c\/strong\u003e suits carburetor pressure demands, preventing flooding from excessive pressure and fuel starvation from low pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-fuel regulator:\u003c\/strong\u003e works with gasoline, diesel, E85 and ethanol \/ alcohol (note: the NBR hose variant is not for E85 - choose the PTFE variant).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in gauge \u0026amp; durable build:\u003c\/strong\u003e includes a 5-12 PSI gauge for real-time checks; 6061-T6 aluminum alloy body for long-term use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo outlet styles:\u003c\/strong\u003e NBR variant ships 3\/8 NPT to 3\/8 Barb fittings ; PTFE variant ships 3\/8 NPT to 6AN fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/FS11307S2-AMZ1-6.2-a3.webp?v=1780575226\"\u003e\u003c\/p\u003e\n\u003ch2\u003eNBR Rubber vs PTFE Braided Fuel Line: Which Variant?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the NBR rubber variant:\u003c\/strong\u003e for gasoline and diesel street builds: 3\/8 in push-lock hose, 650 PSI working, 10 hose clamps, lowest cost and easy routing. Not for E85.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the PTFE variant\u003c\/strong\u003e : for E85, alcohol blends or high-heat \/ high-pressure systems: 6AN PTFE braided hose, 1500 PSI working, full set of 0°\/45°\/90°\/180° AN hose ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSeamless Component Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching connections:\u003c\/strong\u003e the 12V pump (3\/8 in ports) and the 4.5-9 PSI regulator (3\/8 NPT ports) link through the 20FT fuel line and its fittings - NBR variant uses push-lock barb joints, PTFE variant uses 6AN flare joints, both leak-minimized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete hardware:\u003c\/strong\u003e pump adapters, regulator fittings, gauge, bracket, port plug, clamps or AN ends and screws are all in the box for immediate assembly. See the \u003ca href=\"https:\/\/www.ievilenergy.com\/products\/carburetor-fuel-pressure-regulator\"\u003ecarburetor fuel pressure regulator\u003c\/a\u003e, \u003ca href=\"https:\/\/www.ievilenergy.com\/products\/ptfe-fuel-line-kit-20ft\"\u003ePTFE fuel line kit\u003c\/a\u003e and \u003ca href=\"https:\/\/www.ievilenergy.com\/products\/an-fuel-line-kit-push-lock-rubber\"\u003eNBR fuel hose kit\u003c\/a\u003e for individual specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/FS11307S2-AMZ1-6.2-a2.webp?v=1780575272\"\u003e\u003c\/p\u003e\n\u003ch2\u003eVersatile Application Across Equipment\u003c\/h2\u003e\n\u003cp\u003eOptimized for 1960s-1980s muscle cars, hot rods, motorcycles and generators - covering common carbureted vehicle and equipment types for reliable daily and hobbyist performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c6cf388d-4890-43f6-85b3-d96d5c3c0c48.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\" alt=\"Applications\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box — Complete Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V Electric Fuel Pump (carburetor):\u003c\/strong\u003e 1 × pump · 2 × 3\/8 NPSF to 5\/16 in barb adapters · 2 × insulated terminals · 2 × nuts · 2 × washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5-9 PSI Fuel Pressure Regulator :\u003c\/strong\u003e 1 × regulator · 1 × 5-12 PSI gauge · 1 × mounting bracket · 1 × 3\/8 in NPT port plug · 3 × outlet fittings (3\/8 NPT to 3\/8 in Barb \u003cem\u003eor\u003c\/em\u003e 3\/8 NPT to 6AN) · 1 × Allen key + sealant tape · self-tapping \u0026amp; cheese-head screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNBR Rubber Fuel Line variant adds:\u003c\/strong\u003e 20 FT 3\/8 in NBR push-lock hose + 10 hose clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePTFE Braided Fuel Line variant adds:\u003c\/strong\u003e 20 FT 6AN PTFE line with 0°\/45°\/90°\/180° AN hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003carticle\u003e\n\u003ch2\u003eWhy Choose EVIL ENERGY Carburetor Fuel Pump \u0026amp; Regulator Kit?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne box, matched parts\u003c\/strong\u003e - the 12V pump, 4.5-9 PSI regulator and 20FT fuel line are selected to work together, so there is no barb-versus-AN mismatch and no second order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5-9 PSI with a gauge to prove it\u003c\/strong\u003e - set pressure to the carburetor's spec and verify on the included 5-12 PSI gauge; stops flooding at idle and lean-out at wide-open throttle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum bodies built for the bay\u003c\/strong\u003e - 6061-T6 regulator and aluminum gear pump resist corrosion; pump runs -68°F to 194°F, regulator ports are 3\/8 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hose technologies for two fuels\u003c\/strong\u003e - NBR rubber at 650 PSI working for gasoline \/ diesel, or PTFE braided at 1500 PSI working for E85, alcohol and high-heat bays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/article\u003e","brand":"EVIL ENERGY","offers":[{"title":"370LPH \/ 3\/8 inch NBR Fuel Hose","offer_id":46535949058184,"sku":"EV2026CB04","price":161.99,"currency_code":"USD","in_stock":true},{"title":"370LPH \/ 6AN PTFE Fuel Line","offer_id":46535949123720,"sku":"EV2026CB03","price":188.99,"currency_code":"USD","in_stock":true},{"title":"345LPH \/ 3\/8 inch NBR Fuel Hose","offer_id":46535949156488,"sku":"EV2026CB02","price":158.99,"currency_code":"USD","in_stock":true},{"title":"345LPH \/ 6AN PTFE Fuel Line","offer_id":46535949222024,"sku":"EV2026CB01","price":186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/b82b6f5f-ed5b-439a-899d-d9c79a24768d.png?v=1789630370","url":"https:\/\/www.ievilenergy.com\/products\/carburetor-fuel-pump-pressure-regulator-fuel-line-kit","provider":"EVILENERGY","version":"1.0","type":"link"}